Code_Saturne is EDF's general purpose Computational Fluid Dynamics (CFD)
software.
The basic capabilities of Code_Saturne enable the handling of either
incompressible or expandable flows with or without heat transfer and turbulence.
Dedicated modules are available for specific physics such as radiative heat
transfer, combustion (gas, coal, heavy fuel oil, ...), magneto-hydrodynamics,
compressible flows, two-phase flows (Euler-Lagrange approach with two-way
coupling), or atmospheric flows.
See also: <https://github.com/code-saturne/code_saturne>.
===> The following configuration options are available for code_saturne-8.1.1_11:
DOCS=on: Build and/or install documentation
====> Support of METIS: you can only select none or one of them
METIS=on: Support of METIS
PARMETIS=off: Support of ParMETIS
===> Use 'make config' to modify these settings
science/code_saturne: fix a conflict caused by a mix of MPICH / OpenMPI
This is a temporary fix: this port should be upgraded, and follow the
recent changes of mumps / mumps-edf.
python.mk: rename PYTHON_EXT_SUFFIX to PYTHON_TAG, document, etc
EXT_SUFFIX, according to PEP 3149, refers to the full tag and
extension for compiled extension module objects, eg .cpython-311.so,
.cpython-313t.so, etc. We do not use the correct semantic meaning,
and this usage becomes ambiguous and confusing when tags do not
match between bytecode and compiled extension module objects.
Rename our PYTHON_EXT_SUFFIX to PYTHON_TAG to align with PEP 3147's
specification of a magic tag, which consists of implementation name
and shorthand version only. This is meant for bytecode and other
files containing this tag in their filename that do not depend on
a specific Python ABI for the same version. Chase all existing
consumers.
(Only the first 15 lines of the commit message are shown above )
*/*: Remove qtbuilder and sip from RUN_DEPENDS
devel/py-qtbuilder and devel/py-sip should only be used as a
BUILD_DEPENDS. (e.g. USE_PYQT=qtbuilder:build sip:build)
Usually, these are only used to build the PyQt framework, but a few
other ports need them to build. Ports that have them as a BUILD_DEPENDS
unnecessarily haven't been audited yet.
Sip used to be needed for run, but this hasn't been the case for quite
some time. Runtime is provided by the devel/py-qt[56]-sip ports.
(USE_PYQT=pysip). The main PyQt ports provide this automatically, so
it isn't necessary to add it to individual consumers.
While here:
www/onionshare: Remove PyQt stuff completely. It uses PySide.
With hat: kde@
science/code_saturne: Remove dependency
There is a runtime dependency to sysutils/torque which is about to
expire. However in recent versions of code_saturne documentation there
is no mention of the this dependency. For more information:
https://www.code-saturne.org/documentation/8.1/doxygen/src/md__i_n_s_t_a_l_l.html
Approved by: portmgr (blanket)
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
science/code_saturne: chase the upgrade of science/PETSc
Since 3.19.2, the file $LOCALBASE/lib/petsc/conf/variables contains
non-portable code, and gmake is needed to interpret its content.
Reported by: pkg-fallout
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
science/hdf5: bump PORTREVISION of consumers
The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .
Reported by: VVD <vvd@unislabs.com>
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above )
math/py-matplotlib: chase minimum Python version in dependent ports
Since the previous update changed USES=python from 3.6+ to 3.7+, all
dependent ports must have USES=python:3.7+ as well, otherwise it breaks
the @py36 flavor.
PR: 255347
Reported by: sunpoet
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
science/code_saturne: fix build on GCC architectures
Use C++11 compiler:
cs_paramedmem_remapper.cxx:124: error: ISO C++ forbids initialization of member
'_sphere_cen'
Define __XSI_VISIBLE to make gettimeofday() available.
MFH: 2020Q3 (fix build blanket)
Update Sphinx
- Repocopy textproc/py-sphinx to textproc/py-sphinx18
Update it to 1.8.5 (latest version from 1.8.X).
This version supports Python 2 and 3.
Add test target.
- textproc/py-sphinx: Update to 3.0.2
Python 3 only (3.5+).
Add test target.
- Mk/Uses/python.mk: Add PY_SPHINX
(Only the first 15 lines of the commit message are shown above )
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
Fix math/openblas and bump dependent ports
* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]
This is correcting issues from r523749 [1][2][4] and r515970 [3]
PR: 231371
Reported by: build cluster [1]
Reported by: Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by: many [5]
Reviewed by: mat, bapt
Approved by: implicit, since this is a build fix
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
devel/openmp: phase out
- Expire after the last version without /usr/lib/libomp.so
- Drop SOVERSION for seamless transition (i.e., avoid conditionals)
PR: 236907
Approved by: bapt (maintainer)
Differential Revision: https://reviews.freebsd.org/D19767
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
