Harminv is a free program (and accompanying library) to solve the problem
of harmonic inversion - given a discrete-time, finite-length signal
that consists of a sum of finitely-many sinusoids (possibly exponentially
decaying) in a given bandwidth, it determines the frequencies, decay
constants, amplitudes, and phases of those sinusoids.
*/*: bump PORTREVISION after OpenBLAS upgrade
Remark: this souldn’t be necessary, because the version of the library is the
same, but due to many changes between these releases, it is safer this way.
PR: 284314
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Fix math/openblas and bump dependent ports
* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]
This is correcting issues from r523749 [1][2][4] and r515970 [3]
PR: 231371
Reported by: build cluster [1]
Reported by: Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by: many [5]
Reviewed by: mat, bapt
Approved by: implicit, since this is a build fix
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Update Guile to version 2.2.5, modern stable version, and fix dependent
ports to build against it. Most changes are rather minor and mechanical
except for the devel/gdb (obtained via their bugtracker [1], courtesy of
Doug Evans). One port (science/meep) I had to mark BROKEN after fixing
it proved to be very tedious and actually unreliable. It is very old,
there are newer versions available so it should be fixed by updating.
One port (devel/libruin) had revealed a bug in the new Guile code (an
auxiliary script, really) that had to be worked-round; reference to the
problematic upstream commit is provided in the patch.
PR: 229613
Exp-run by: antoine
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21104#c8
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.
Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.
This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.
That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.
Approved by: portmgr (bdrewery)
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Harminv is a free program (and accompanying library) to solve the problem
of harmonic inversion - given a discrete-time, finite-length signal
that consists of a sum of finitely-many sinusoids (possibly exponentially
decaying) in a given bandwidth, it determines the frequencies, decay
constants, amplitudes, and phases of those sinusoids.
WWW: http://ab-initio.mit.edu/wiki/index.php/Harminv
PR: ports/142154
Submitted by: Stas Timokhin <devel@stasyan.com>