scikits-sparse is a Python module for sparse matrix calculations.
The scikit-sparse package is a companion to the scipy.sparse package for sparse
matrix manipulation in Python. It provides routines that are not suitable for
inclusion in scipy.sparse proper, typically because they depend on external
libraries with GPL licenses, such as SuiteSparse.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py312-scikit-sparse listed in the above command, you can pick from the names under the Packages section.
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
science: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Andreas Fehlner <fehlner@gmx.de>
* Brad Huntting <huntting@glarp.com>
* Chao Shin <quakelee@cn.FreeBSD.org>
* Cheng-Lung Sung <clsung@FreeBSD.org>
* Chia-Hsing Yu <me@davidyu.org>
* Chris Rees <utisoft@gmail.com>
* David Naylor <dbn@FreeBSD.org>
* Dmitry Sivachenko <demon@FreeBSD.org>
* Ed Schouten <ed@FreeBSD.org>
* Eric Freeman <freebsdports@chillibear.com>
* Erik B Knudsen
(Only the first 15 lines of the commit message are shown above )
math/suitesparse: adapt dependency lines after modularization
Do not bump PORTREVISION, because this should not change the resulting
packages.
Note for maintainers: try to not depend on the whole suitesparse package,
especially if your port do not require GraphBLAS (the biggest one).
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
science/py-scikit-sparse: Update 0.2 -> 0.4.3
Port changes:
* Fix scipy dependency
* Order USE_PYTHON
* Modify CFLAGS
* Add stripping
* Remove patch because it has been applied upstream
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
- Fix build when using python 3.x
- Update WWW in pkg-descr, points to new project location now
PR: 201346
Submitted by: john@saltant.com
Approved by: yuri@rawbw.com (maintainer)
MFH: 2015Q3
