science/py-spglib: Remove workaround for the _version_ symbol; Add missing
dependency

science/{,py-}spglib: update 2.4.0 → 2.5.0

Reported by:	portscout

science/py-spglib: Fix build with removing setuptools from RUN_D

PR:		270510
Approved by:	portmgr@(blanket, fix build)

science/{,py-}spglib: update 2.3.1 → 2.4.0

Reported by:	portscout

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

science/py-spglib: Build using PEP517 tools instead of cmake

science/{,py-}spglib: update 2.3.0 → 2.3.1

Reported by:	portscout

science/{,py-}spglib: update 2.2.0 → 2.3.0

Reported by:	portscout

science/{,py-}spglib: update 2.1.0 → 2.2.0

Reported by:	portscout

science/{,py-}spglib: update 2.0.2 → 2.1.0

Reported by:	portscout

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

science/{,py-}spglib: Update 2.0.1 → 2.0.2

science/spglib: Update 1.16.5 -> 2.0.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

science/{,py-}spglib: Update 1.16.3 -> 1.16.5

science/{,py-}spglib: Update 1.16.2 -> 1.16.3

science/[,py-]spglib: Update 1.16.1 -> 1.16.2

Reported by:	portscout

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

science/py-spglib: Update 1.16.0 -> 1.16.1

Reported by:	portscout

Drop python 2.7 support from a few ports

With hat:	portmgr

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

science/py-spglib: Update 1.15.1 -> 1.16.0

Reported by:	portscout

science/py-spglib: Update 1.14.1 -> 1.15.1

science/py-spglib: Update 1.13.0 -> 1.14.1

Reported by:	portscout

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

science/py-spglib: Update 1.12.2 -> 1.13.0

Reported by:	portscout

science/py-spglib: Update 1.12.0 -> 1.12.2

science/py-spglib: Update 1.11.1 -> 1.12.0

Reported by:	portscout

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

science/py-spglib: Update 1.10.4.11 -> 1.11.1

science/py-spglib: Update 1.10.4.1 -> 1.10.4.11

Reported by:	repology

science/py-spglib: Update 1.10.3.65 -> 1.10.4.1

Reported by:	repology

science/py-spglib: Fix typo in COMMENT

science/py-spglib: Remove stray USES; Update COMMENT; Update WWW

* Clarify comment
* Remove USES=shebangfix
* Update WWW to have https

New port: science/py-spglib: Library for finding and handling crystal symmetries