Port details |
- py-xbout Collect data from BOUT++ runs in python using xarray
- 0.3.5_2 science =2 0.3.5_2Version of this port present on the latest quarterly branch.
- Maintainer: yuri@FreeBSD.org
- Port Added: 2022-12-25 01:24:23
- Last Update: 2024-02-29 07:18:32
- Commit Hash: 5d4139f
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: education
- License: APACHE20
- WWW:
- https://github.com/boutproject/xBOUT
- Description:
- xBOUT provides an interface for collecting the output data from a BOUT++
simulation into an xarray dataset in an efficient and scalable way, as well
as accessor methods for common BOUT++ analysis and plotting tasks.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}xbout>0:science/py-xbout@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/science/py-xbout/ && make install clean
- To add the package, run one of these commands:
- pkg install science/py-xbout
- pkg install py39-xbout
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-xbout listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-xbout
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1674265184
SHA256 (xbout-0.3.5.tar.gz) = 203f86c8805763d72831fde61d77299629541c8ed368932a82da8aeef9283ead
SIZE (xbout-0.3.5.tar.gz) = 4797915
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools-scm>0 : devel/py-setuptools-scm@py39
- py39-setuptools_scm_git_archive>0 : devel/py-setuptools_scm_git_archive@py39
- py39-animatplot>=0.4.2 : math/py-animatplot@py39
- py39-boutdata>=0.1.4 : science/py-boutdata@py39
- py39-dask>=2.10.0 : devel/py-dask@py39
- py39-gelidum>=0.5.3 : devel/py-gelidum@py39
- py39-matplotlib>=3.1.1 : math/py-matplotlib@py39
- py39-natsort>=5.5.0 : devel/py-natsort@py39
- py39-netCDF4>=1.4.0 : science/py-netCDF4@py39
- py39-pillow>=6.1.0 : graphics/py-pillow@py39
- py39-xarray>=0.18.0 : devel/py-xarray@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- py39-pytest>=7,1 : devel/py-pytest@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-animatplot>=0.4.2 : math/py-animatplot@py39
- py39-boutdata>=0.1.4 : science/py-boutdata@py39
- py39-dask>=2.10.0 : devel/py-dask@py39
- py39-gelidum>=0.5.3 : devel/py-gelidum@py39
- py39-matplotlib>=3.1.1 : math/py-matplotlib@py39
- py39-natsort>=5.5.0 : devel/py-natsort@py39
- py39-netCDF4>=1.4.0 : science/py-netCDF4@py39
- py39-pillow>=6.1.0 : graphics/py-pillow@py39
- py39-xarray>=0.18.0 : devel/py-xarray@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- science_py-xbout
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Number of commits found: 7
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.3.5_2 29 Feb 2024 07:18:32 |
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
0.3.5_2 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.3.5_2 25 Apr 2023 15:17:15 |
Christian Weisgerber (naddy) |
audio/opus: bump consumers after update to 1.4 |
0.3.5_1 23 Apr 2023 09:09:58 |
Gerald Pfeifer (gerald) |
*: Bump PORTREVISIONs for math/mpc update to 1.3.1 |
0.3.5 21 Jan 2023 17:08:59 |
Yuri Victorovich (yuri) |
science/py-xbout: Update 0.3.3 -> 0.3.5
Reported by: portscout |
0.3.3 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
0.3.3 25 Dec 2022 01:22:57 |
Yuri Victorovich (yuri) |
science/py-xbout: New port: Collect data from BOUT++ runs in python using xarray |
Number of commits found: 7
|