- presrve downloaded cvd files on deinstall
Approved by:    Rob Evers

Fix build with milter on FreeBSD 4.X.

- Update to 0.87

PR:             ports/86276
Submitted by:   dawnshade <h-k@mail.ru>
Approved by:    maintainer timeout (3 days)
                timeout rushed by simon (secteam hat)
Security:       CAN-2005-2919, CAN-2005-2920,
                http://www.secunia.com/advisories/16848/

- Bandaid compilation on FreeBSD 5.2.1

PR:             ports/84131
Submitted by:   Thorolf <thorolf@grid.einherjar.de>
Approved by:    maintainer timeout (1 month)

- Fix startup script for milter

PR:             ports/84104
Submitted by:   maintainer
Reported by:    Erin Fortenberry <kahn@deadbbs.com>

- Update to 0.86.2

PR:             ports/84038
Submitted by:   dawnshade <h-k@mail.ru>
Approved by:    maintainer

Fix the fix of the compilation of the milter interface.

Fix compilation of the milter interface.

Reported by:    Tony Shadwick <tshadwick@goinet.com>

Remove mtree dir from pkg-plist

- Update to 0.86.1
A possible crash in the libmspack's Quantum decompressor has been fixed.

PR:             ports/82604
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    maintainer

- Bump PORTREVISION

Requested by:   Pavel Rochnyack (irc)

- Fix compilation of the milter interface [1]
- Unconditionally define PORTDOCS, as bsd.port.mk now tests ${NOPORTDOCS}

[1]:
PR:             ports/82543
Submitted by:   Thomas Abthorpe <thomas@stthomasanglican.org>

- Update to 0.86 [1]
- Fix the packing list

[1]
PR:             ports/82474
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    maintainer

Do not remove libdata/pkgconfig since it is now part of mtree.

Reported by:    pointyhat via kris

Update to 0.85.1.

PR:             81157
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers (maintainer)

- Update to 0.85 [1]
- Fix syntax of "extern C" wrappers in .h files [2]
- Use SUB_FILES facility
- Polish the Makefile

PR:             ports/80947
Submitted by:   maintainer [1], Milan Obuch <ports-bugs@dino.sk> [2]

Update security/clamav to version 0.84.

PR:             ports/80570
Submitted by:   maintainer

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 0.83

PR:             ports/77561
Submitted by:   Marcus Grando <marcus@corp.grupos.com.br>
Approved by:    Rob Evers <rob@debank.tv> (maintainer)

- Fix crashing of milter by turning off SESSION support [1]
- Fix build when libmilter was built with LDAP [2]

PR:             ports/77255 [1], ports/77235 [2]
Submitted by:   Sergey N. Voronkov <serg@tmn.ru> [1],
                Lewis Thompson <lewiz@compsoc.man.ac.uk> [2]
Approved by:    Rob Evers <rob@debank.tv> (maintainer)

- Update to 0.82

PR:             ports/77231
Submitted by:   maintainer

Remove unexisting directory from PORTDOCS.
Bump PORTREVISION.

Upgrade to 0.81.

PR:             ports/76864
Submitted by:   maintainer

Introduce a variable LOGDIR instead of using a literal log directory
pathname everywhere.

Approved by:    Rob Evers (maintainer)

Don't leave the pkgconfig data directory rotting there
if we are the last to clean it up.

Pointed out by: kris' magic tools
Approved by:    Rob Evers (maintainer)

Do the things I forgot about in my previous commit:

- Change the last instance of literal `/var/run/clamav' to %%RUNDIR%%.
- Bump PORTREVISION since the changes should improve the functionality
  of the installed package.

PR:             ports/75607
Approved by:    maintainer

1. Make clamav-milter write its pidfile.
2. Shut down clamav daemons in the right order
   on uninstall (or else they may refuse to quit.)
3. Use rcorder(8) keywords to guarantee the right
   startup/shutdown order of the clamav services.

PR:             ports/75607
Approved by:    the maintainer

Fix ports: security/clamav and security/clamav-devel (change db
directory to /var/db/clamav and fix removal of db on deinstall)

        For the sake of coherence, the ClamAV database should be
        installed in /var/db/clamav, not /usr/local/share/clamav.
        Also fixes the database removal on package deinstallation.

PR:             ports/74172
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>
Approved by:    Rob Evers <rob@debank.tv>

- Fix plist

PR:             ports/73558
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- don't delete the virus database on deinstall
  (sync with clamav-devel)
Approved by:    Rob Evers

- update to 0.80 release

PR:             72810
Submitted by:   Rob Evers <rob@dokus.debank.tv> (maintainer)

- update to 0.80rc4
  + JPEG comment exploit (MS04-028) detection

  *** IMPORTANT ***
  The configruration file for the clamd daemon has changed from
  /usr/local/etc/clamav.conf to /usr/local/etc/clamd.conf.

PR:             72203
Approved by:    Rob Evers <revers@infraqon.nl> (maintainer)

- Update to 0.75.1

PR:             ports/69805
Submitted by:   Marcus Grando <marcus@corp.grupos.com.br>
Approved by:    maintainer

- Update to 0.75

PR:             ports/69657
Submitted by:   Renato Botelho <rbgarga@gmail.com>
Approved by:    maintainer

Update security/clamav to 0.74 release
Various bug fixes and improved Microsoft VBA support

PR:             68597
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

update to 0.73
use freshclam pid file

PR:             67962
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Update security/clamav to 0.72 release
This is a bug fix release only, and fixes a few possible crashes

PR:             67561
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- Use fixed UID/GID

- Change location of milter socket to match clamav-devel port. This does not
  affect users with already installed config files.
- Cleanup

PR:             ports/67207
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Update clamav to rev 0.71

 -Improved VBA support
 -Lots of milter fixes
 -Various bugs fixed

Submitted by:   maintainer

- Fix dependencies

PR:             ports/66879
Submitted by:   Beresovsky Andrey <and@rsu.ru>
Approved by:    maintainer

Update security/clamv to 0.70
        -Improved VBA code
        -Scan EVS mails
        -Handle bounced messages
        -ArchiveDetectEncrypted is renamed to ArchiveBlockEncrypted (config
file)
        -freshclam: fix SIGHUP handling (patch by Dr Matthew J Seaman)
        -Use OPTIONS
        -Various bugfixes and code cleanup
        -Use FixStaleSocket by default in the config file (don't remove the
                Socket when starting clamd)

PR:             65763
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Hand maintainership over to Rob Evers.

PR:             65182
Submitted by:   TERAMOTO Masahiro <markun@onohara.to> (maintainer)

forced commit to note:

PR:             64348
Approved by:    maintainer timeout (>2 weeks)

Update to clamav 0.70

- new thread manager (with better SMP support)
- new switch ArchiveDetectEncrypted
- new directive: ArchiveDetectEncrypted
- see /usr/local/share/doc/clamav/NEWS
- install html documentation to /usr/local/share/doc/clamav/html

added CLAMAVUSER/CLAMAVGROUP support

Adopted the port to ensure timely fixes in case I broke something :P
Please reset the maintainer if TERAMOTO Masahiro shows up again.

- Revert revision 1.22
  NO_SENDMAIL is used to disable Sendmail build in base system.
  It's presence does not inhibit Sendmail installed from port.

Requested by:   Marius Strobl <marius@alchemy.franken.de>
                Alex Vasylenko <lxv@omut.org>

use included libtool

Convert all but one port that uses libtool14 to use libtool15, in readiness
for the destruction of devel/libtool14

... and remove my experimental bsd.port.mk hacks :)

Pointy hat to:  me

- update to version 0.67-1

PR:             63065
Reviewed by:    Angelo Turetta <aturetta@commit.it>
Approved by:    maintainer timeout (2 weeks)

- If WITH_MILTER is set and NO_SENDMAIL is defined, don't try to build milter.

PR:             ports/55611
Submitted by:   TERAMOTO Masahiro <markun@onohara.to> (maintainer)

*** SECURITY update ***

- fix a trivially remote exploitable DOS vulnerability
  <http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/62586>
  <http://www.securityfocus.com/archive/1/353186>

while I'm here, fix stale socket removal. Perhaps enabling
FixStaleSocket in clamav.conf would be a better idea, but
I don't want to overuse this security related commit.

PR:             62586, 62601
Submitted by:   eik, Vivek Khera <vivek@khera.org>
Reviewed by:    bugtraq mailing list
Approved by:    security-officer

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

1. Add a freshclam rc.d script to start freshclam so the AV database is
   updated periodically.  Loosely based on the script in the PR.
2. Reorder some operations in the various Makefile targets.
3. Bump PORTREVISION.

PR:             61966 [1]
Submitted by:   Douglas K. Rand <rand@meridian-enviro.com>

. Add a pkg-deinstall script telling people how they can get rid of the
  clamav user permanently if they wish to.

. Add $FreeBSD$
. Indent
. Split into pre-install and post-install stages.
  Pre-install: Add the user and group.
  Post-install: Create the log and run directories.

Fix the comment in the startup-script regarding how to enable clamav-milter
in rc.conf.

Bumped PORTREVISION as this fix may be important for an user.

Mail is on its way to the maintainer but because of the actual virus
situation I do not wait for maintainer approval and commit the fix
right now (the submitter also submitted the startup-script for a previous
commit, so this is mainly a bugfix for a previously approved commit).

Submitted by:   Marius Strobl <marius@alchemy.franken.de>

Fix some bugs in the previous commit...
 - correct typo in the name of the socket variable (used to remove a stale
   socket)
 - install the startup script with the correct name (important if you use
   clamav-milter too)

Submitted by:   Marius Strobl <marius@alchemy.franken.de>
Approved by:    maintainer (implizit, this is a bugfix for the previous
                version)

Correct the OSVERSION check for the libgmp depedency; libgmp was removed
waaaay earlier than I had previously thought.  Also bump portrevision
since this is an important change for 5.x users.

Approved by:    portmgr (marcus)

Clamav 0.65 uses libgmp for digital signature calculations;
as libgmp no longer exists in 5.x, add the needed dependency
to this Makefile.

(Note that stale gmp.h and libgmp files sitting around may
still cause problems, anyone with an "old" 5.x system that
sees oddities in the build should make sure that those old
files are purged from /usr/lib and /usr/include.)

Fix build on -CURRENT.

Reported by:    bento via kris
Approved by:    portmgr (implicit)

* Update to 0.65
* Create /var/run/clamav with 750 permissions

PR:             59458
Submitted by:   Rui Lopes <rui@ruilopes.com>
Approved by:    maintainer

- ensure that an stale clamd socket will be deleted. [1]
- Add conflict with clamav-devel port [2]
- fix milter on STABLE [3]
no response from maintainer

PR:             57379, 58037
Submitted by:   martin@mail.tradex.sk [1], rob@debank.tv [2], dinoex [3]

- don't remove clamav account on deinstall
- use included libtool (seems heavily patched)
- make packageable and include a working configure file
- add a rcNG start/stop script
- added web site
- don't install useless .la files
- use DATADIR
- 510001 is FreeBSD 5.10, 5.1-CURRENT is 501100
- minor cleanup

PR:             57256
Submitted by:   eikemeier@fillmore-labs.com

- Fix for STABLE
- Use new MASTER_SITES
PR:             57149
Submitted by:   rob@debank.tv
Approved by:    markun@onohara.to

Use clamav-milter, but support only gcc30 or higher.

PR:             ports/53699
Submitted by:   Rob Evers <rob@debank.tv>
Approved by:    TERAMOTO Masahiro <markun@onohara.to> (maintainer)

* Upgrade to 0.60.
* Add --enable-bigstack.

PR:             ports/53632
Submitted by:   Rob <rob@debank.tv>
Approved by:    maintainer

o Add mirror site.
o Remove unnecsesary patches for current.
o Add/remove users when installing/removing.
o Set permissions on virus database dir.

PR:             ports/53305
Submitted by:   Rob Evers<rob@debank.tv>
Approved by:    TERAMOTO Masahiro <markun@onohara.to> (maintainer)

Fix install error.

PR:             ports/53112
Submitted by:   Michal F. Hanula <frankie@kyblik.pieskovisko.sk>
                Rob <rob@debank.tv>

Enable pthread support using devel/pth.
Turn on building clamd and clamdscan.

PR:             53056
Pointed out by: Olivier Tharan <olive@oban.frmug.org>
Submitted by:   TERAMOTO Masahiro <markun@onohara.to>

PR:             52226
Maintainer update: Clam AntiVirus contains OAV database, but its database is
developed independently.

        Pointed out by Tomasz Kojim <zolw@konarski.edu.pl>
                developer of Clam AntiVirus

De-pkg-comment.

maintainer-update: security/clamav to 0.54

PR:             ports/47291
Submitted by:   TERAMOTO Masahiro <markun@onohara.to>

new port: security/clamav

        Clam Antivirus is command line virus scanner using database
        from OpenAntiVirus.

PR:             ports/40602
Submitted by:   TERAMOTO Masahiro <markun@onohara.to>