security/p5-Crypt-GCrypt: Fix configure with llvm16

This came up during an exp-run for gettext 0.22.

PR:		272210

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

security: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Kapranoff <kappa@rambler-co.ru>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Leidinger <netchild@FreeBSD.org>

security/p5-Crypt-GCrypt: Cosmetic change

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Do not use post-stage.  Use post-install instead.

The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.

PR:		214780
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Use USES=localbase
- Pet portlint: fix diff header of patch files

security/libgcrypt: 1.6.1 -> 1.6.2, bump depends

Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
  with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
  error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code.  Take
	care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

security/libgcrypt: 1.5.3_3 -> 1.6.1

- Update to 1.6.1
- Remove some unneeded patches
- Fix pkg-plist
- report configure bug upstream
  https://bugs.g10code.com/gnupg/issue1668
- report API breakage downstream and find that MacPorts had the same issue
  https://rt.cpan.org/Ticket/Display.html?id=97201
- bump PORTREVISION for dependent ports (approx. 100 ports)
- Thanks to exp-run by antoine@ to find ports that break
- patch ports that would otherwise break
  security/shishi with PR 192164 is already committed
  [1] devel/ccrtp
  [2] editors/abiword
  [3] security/p5-Crypt-GCrypt

PR:		191256, 192162 [1], 192163 [2], 192166 [3]
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Approved by:	maintainer timeout, antoine (exp-run), portmgr (implicit)

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- Update to 1.26
- Convert to new LIB_DEPENDS format
- Reformat pkg-descr

Changes:	http://search.cpan.org/dist/Crypt-GCrypt/Changelog

- Take maintainership

Reset maintainer on staged ports too

With hat:	portmgr

- add stage support

Approved by:	portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat:
security)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

Chase security/libgcrypt update

- Update to 1.25 [1]
- Add LICENSE (Artistic 1 & GPLv1)
- Reset PORTREVISION

Changes:        http://search.cpan.org/dist/Crypt-GCrypt/Changelog
PR:             ports/161125 [1]
Submitted by:   TAKAHASHI Kaoru <kaoru@kaisei.org> (maintainer)

- Change PERL_CONFIGURE to "yes" for all values less than or equal to 5.8.0+

With hat:       perl

-remove MD5

- Chase the libgcrypt shared lib version

- only 13% of the p5- ports embed @comment $FreeBSD$:
  so standarize and remove it

With Hat:   perl@

Chase security/libgcrypt shlib bump.

PR:             ports/148755
Submitted by:   Hirohisa Yamaguchi <umq@ueo.co.jp>

- Update to 1.24

PR:             ports/143719
Submitted by:   TAKAHASHI Kaoru <kaoru@kaisei.org> (maintainer)

- Update to 1.23

PR:             ports/142553
Submitted by:   TAKAHASHI Kaoru <kaoru@kaisei.org> (maintainer)

Update to 1.22

PR:             140404
Submitted by:   maintainer

- Update to 1.21

PR:             131419
Submitted by:   Wen Heping <wenheping@gmail.com>
Approved by:    maintainer

- Bump PORTREVISION due to share library version bump in security/libgcrypt

PR:              ports/127478

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Chase libgcrypt library version

- Update to 1.20
- Better adjustment of dependencies
- Style

PR:             ports/121011
Submitted by:   Felippe de Meirelles Motta <lippemail@gmail.com>
Approved by:    maintainer

- Update to 1.17

PR:             117659
Submitted by:   TAKAHASHI Kaoru <kaoru@kaisei.org> (maintainer)

Fix mismerge.

Hat:    portmgr

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

- Update to 1.16

PR:             112600
Submitted by:   TAKAHASHI Kaoru <kaoru@kaisei.org> (maintainer)

- Add WWW Entry

PR:             ports/105866
Submitted by:   TAKAHASHI Kaoru <kaoru at kaisei.org> (maintainer)

Add p5-Crypt-GCrypt 1.15, perl interface to the GNU Cryptographic
library.

PR:             ports/103767
Submitted by:   TAKAHASHI Kaoru <kaoru at kaisei.org>