Bacula is a set of computer programs that permit you (or the system
administrator) to manage backup, recovery, and verification of
computer data across a network of computers of different kinds.
In technical terms, it is a network Client/Server based backup program.
Bacula is relatively easy to use and efficient, while offering many
advanced storage management features that make it easy to find and
recover lost or damaged files. Due to its modular design, Bacula is
scalable from small single computer systems to systems consisting of
hundreds of computers located over a large network.
===> The following configuration options are available for bacula9-server-9.6.7_5:
IPV6=on: IPv6 protocol support
MTX=off: Install mtx for control of autochanger devices
NLS=on: Native Language Support
====> Options available for the multi BACKEND: you have to choose at least one of them
SQLITE3=off: SQLite 3 database support
MYSQL=off: MySQL database support
PGSQL=on: PostgreSQL database support
===> Use 'make config' to modify these settings
bacula server was installed
A database upgrade is required if upgrading from Bacula < 9.0.
See /usr/local/share/bacula/update_bacula_tables
An auto-changer manipulation script based on FreeBSDs
chio command is included and installed at
/usr/local/sbin/chio-bacula
Please have a look at it if you want to use an
autochanger. You have to configure the usage in
/usr/local/etc/bacula/bacula-dir.conf
Take care of correct permissions for changer and
tape device (e.g. /dev/ch0 and /dev/n[r]sa0) i.e.
they must be accessible by user bacula.
Due to lack of some features in the FreeBSD tape driver
implementation you MUST add some OS dependent options to
the bacula-sd.conf file:
Hardware End of Medium = no;
Backward Space Record = no;
Backward Space File = no;
With 2 filemarks at EOT (see man mt):
Fast Forward Space File = no;
BSF at EOM = yes;
TWO EOF = yes;
With 1 filemarks at EOT (see man mt):
Fast Forward Space File = yes;
BSF at EOM = no;
TWO EOF = no;
NOTE: YOU CAN SWITCH EOT model ONLY when starting
from scratch with EMPTY tapes.
It is also important that all the scripts accessed
by RunBeforeJob and RunAfterJob will be executed by
the user bacula. Check your permissions.
For USB support read the bacula manual. It could be necessary
to configure/compile a new kernel.
Look at /usr/local/share/bacula/update_bacula_tables for
database update procedure. Details can be found in the
ReleaseNotes
If you are using sqlite you need to run the make_sqlite_tables script as
the bacula user. Do this using 'sudo su -m bacula'.
sysutils/bacula*-{client,server}: fix rc script names
The filenames now comply with the rc scripting recommendations and
service jails options.
Users may have to update any personal scripts they have which depend
upon those rc.d script names. See UPDATING for 20240705
PR: 280137
sysutils/bacula*-server: remove unused scripts
Remove
* files/pkg-deinstall.server.in
* files/pkg-install.server.in
They are not used. They duplicate the actions of the cliemt scripts.
The server requires the client.
PR: 273306
sysutils/mkjail: Revert "sysutils/mkjail: Update to 0.0.4"
This reverts commit a8cc45bb7a5f1b8f4b7faa8506bb5ce65baa555b.
Sorry, I committed way more than I intended to.
sysutils/bacula*-server: rc.d corrections
When both MySQL and PostgreSQL are selected, make sure the rc.d script
is correct. Further more, I must reverse my clever idea to "remove a
space within files/bacula-dir.in".
Next time, I should notice the PR contains a patch for the problem I'm
fixing.
PR: 273296
sysutils/bacula*-server: set rc.d REQUIRES
Correctly set the REQUIRES for bacula-dir to one of:
* mysql
* postgresql
This setting was lost sometime after bacula5-server
While here, remove a space within files/bacula-dir.in so the resulting
REQUIRES contains only one space.
PR: 273296
sysutils/bacula*-server: fix some textual issues in ancillary script
Convert to UTF-8, correct several readability and spelling mistakes.
Verified by: cksum(1)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
*/*: Remove redundant '-*' from CONFLICTS definitions
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Approved by: portmgr (blanket)
Add Bacula 11.0.1
NOTE: New Catalog format in version 11.0 and greater
The upgrade process will require more or less twice the
size of the actual database.
see update_bacula_tables
re https://www.bacula.org/bacula-release-11-0-1/
While here, update Bacula 9 conflicts.
Update to 9.6.7
This is a minor bug fix that corrects among other things the MySQL/MariaDB
schemas. This is the last release of the 9.6.x series.
re: https://www.bacula.org/bacula-release-9-6-7/
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Upgrade to 9.2.2
https://blog.bacula.org/bacula-release-9-2-2/
Note: if you are running MySQL and have not recently executed
src/cats/update_bacula_tables, please do so. It will not change
your database version but it will fix some potential MySQL problems
(for more detals see the release notes for version 9.2.1).
Update to 9.0.6:
We are pleased to announce the release of version 9.0.6 of Bacula
This is a bug fix and enhancement release. The two major enhancements are
support for Qt5 in bat and the tray monitor, and support for OpenSSL-1.1.
However, the current Qt5 enhancement is not yet complete, so please continue to
use Qt4 for building bat and the tray monitor. There were also a number of nice
bug fixes. Thanks to the users who supplied patches for the enhancements and bug
fixes. They are much
appreciated.
19Nov17
Update AUTHORS for recent commits
Remove incorrecly placed openssl-compat.h
Add openssl-compat.h which went in wrong directory
baculum: Add removing single resource
baculum: Add module to check resource dependencies
baculum: Fix saving names with spaces inside schedule Run directive
baculum: Fix saving entire config by api request
Backout vol size tests in previous attempt to fix bug #2349
Fix compiler warning in previous patch
(Only the first 15 lines of the commit message are shown above )
sysutils/bacula9-server: upgrade to 9.0.5.
Hello,
I am pleased to announce that we have just released Bacula version 9.0.5
This is an important bug fix release. In particular it fixes the cases
where Bacula would print a very large number of error messages. Additional
backported code from Bacula Enterprise is included as well as updates to
the rpm scripts. A number of minor Baculum issues have also been
corrected.
01Nov17
- Use if exists on dropping MAC table in postgres. Fixes bug #2314
- Fix bdirjson display of Minutes. Fixes bug #2318
(Only the first 15 lines of the commit message are shown above )
Switch bacula9-bat to use bacula9-server as MASTERPORT
In the master port, adjust the PKGNAMESUFFIX for bat to be 9-bat
This allows bacula9-bat to build
