sysutils/lcdproc: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

sysutils: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <jsmith@resonatingmedia.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Landwehr <aaron@snaphat.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Adrian Chadd
  *  Adrian Chadd <adrian@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Deiter <alex.deiter@gmail.com>

sysutils/lcdproc: remove HID option

HID option relied on devel/libhid which was removed.

PR:	259774
Reported by:	ohartmann@walstatt.org
Approved by:	daniel@shafer.cc (maintainer)

sysutils/lcdproc: enable on powerpc

*/*: Replace USE_GCC=any with USE_GCC=yes

USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).

Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.

This should not make any functional difference at all.

Discussed with:	mat, linimon, pkubaj

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

sysutils/lcdproc: add powerpc64le support

sysutils/lcdproc: fix build on powerpc64 elfv2

Use GCC:
In file included from serialVFD_io.c:45:
./port.h:344:32: error: invalid output constraint '=a' in asm
        __asm__ volatile ("inb %1,%0":"=a" (value)

MFH:		2021Q1

sysutils/lcdproc: fix packaging on non-x86

Approved by:	tier 2 blanket
MFH:		2021Q1

Fix build with -fno-common

PR:	249964

sysutils/lcdproc: enable on powerpc64

Builds fine.

Add USES=xorg and USES=gl

Add USES=xorg and USES=gl to a few remaining ports.

Convert to UCL & cleanup pkg-message (categories s)

sysutils/lcdproc: use ftdi1

While here, pass maintainership to submitter

PR:		232165
Submitted by:	Daniel Shafer <daniel@shafer.cc>

* Updated to 0.5.9
* Upstream repo moved SF --> GITHUB
* Reset maintainer

PR:		221097
Reported by:	Dutchman01
Approved by:	maintainer timeout (2+ months)

Remove unused ACLOCAL_ARGS.

Fix parallel build (fix port-internal make dependencies) on many cores

PR:		214766
Submitted by:	lstewart
MFH:		2017Q1 (build fix blanket)

Assume "pkg-config libusb*" works after 9.x EOL

FreeBSD appears to use different pkg-config name for 0.1.x API but it
doesn't matter much as 0.1, 1.0 and 2.0 share CFLAGS/LIBS.

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=autoreconf

Bump portrevision after png update

Cleanup plist

devel/libftdi: USES=libtool, fix build, bump dependencies

comms/linrad
comms/lirc
devel/urjtag
devel/openocd
sysutils/lcdproc
sysutils/flashrom

devel/xc3sprog is already bumped via PR 188055

- Update to 0.5.7

PR:		190393
Submitted by:	maintainer

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)

In preparation of removing devel/libusb (expires 2013-04-30), remove it
from these ports.

Other changes:
- convert Makefile header
- convert to optionsNG
- remove indefinite article from comment
- drop support for FreeBSD < 8.0
- pet portlint (leave library ABI versions in LIB_DEPENDS)
- net-mgmt/spectools: change option name from GTK to GTK2 to use default
  description from bsd.options.desc.mk

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

Remove extra period and fix whitespace.

Feature safe:	yes

Preserve attribution removed by mistake in previous commit.

Noticed by:	danfe
Feature safe:	yes

- Update to 0.5.6
- Convert to USE_PACKAGECONFIG and make it a run depends
- Remove ABI version numbers from LIB_DEPENDS
- Trim Makefile headers

PR:		ports/173433
Submitted by:	Markus Dolze <bsdfan@nurfuerspam.de> (maintainer)
Feature safe:	yes

- Convert to new options framework
- Enable USB support by default

PR:             ports/169275
Submitted by:   Markus Dolze <bsdfan@nurfuerspam.de>
Approved by:    crees, tabthorpe (mentors, implicit)

Update autoconf to 2.69 and automake to 1.12

PR:             166836
Tested by:      Multiple -exp runs (pav)

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Update to 0.5.5

PR:             162452
Submitted by:   "Markus Dolze" <bsdfan@nurfuerspam.de> (maintainer)
Feature safe:   yes

- Update to 0.5.4

PR:             ports/154895
Submitted by:   Markus Dolze <bsdfan@nurfuerspam.de> (maintainer)

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S

- Fix libusb detection on 8.X

PR:             136941
Submitted by:   Charlie <bsdfan@nurfuerspam.de> (maintainer)

- Update to 0.5.3

PR:             ports/135900
Submitted by:   Markus Dolze <bsdfan AT nurfuerspam.de> (maintainer)

- Chase libusb20 rename in r189585.
- Mark sane-backends broken on current due to changes
  in USB stack.

Reviewed by:    thompsa (old version), miwi
Tested by:      miwi

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Explicitly set drivers to build
- Disable imon driver which is for Linux only
- Add OPTIONS

Submitted by:   Markus Dolze <bsdfan at nurfuerspam.de> (maintainer)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Fix compilation on AMD64 due to missing APM interface

PR:             115843
Submitted by:   "Markus Dolze" <bsdfan@nurfuerspam.de>

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 0.5.2.

PR:             ports/112415
Submitted by:   Volker Theile <votdev@gmx.de>
Reviewed by:    Markus Dolze <bsdfan@nurfuerspam.de> (maintainer)
Approved by:    stas (mentor)

- Changed lcdproc client startup script to require config file, because
  command line switch to daemonize is not supported as of version 0.5.1.

PR:             ports/105681
Submitted by:   Markus Dolze <bsdfan at nurfuerspam.de> (maintainer)

- Update to 0.5.1
- Change maintainer's email

PR:             ports/105015
Submitted by:   Markus Dolze (maintainer)

- Something's wrong on last commit. cvs only commit Makefile.

Notified by:    krismail

- Update to 0.5.0
- Add new rc.d scripts
- Take maintainership

PR:             95858
Submitted by:   Markus Dolze <mmdolze___users.sourceforge.net>

- Add SHA256

- Update to 0.4.5

PR:             ports/76433
Submitted by:   Lewis Thompson <purple@fajita.org>

SIZEify.

- Fix build on 5.x

PR:             ports/59521
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org>
Approved by:    adamw (mentor)

LCDd daemon from sysutils/lcdproc starts in the foreground

        The LCDd.sh.sample start script from the LCDproc-0.4.3_2
        ports starts the LCDd process that's also part of the port
        in the foreground, thereby blocking the system startup.

PR:             ports/54092
Submitted by:   Christian Ullrich <chris@chrullrich.de>

fix build on -current

PR:             51872
Submitted by:   Ports Fury

Enable building of all hardware drivers and fix a bug with outb.
My HD44780 based 16x2 display (in 4 bit mode) now works.

De-pkg-comment.

Fix startup script. Bump PORTREVISION.

PR:             47616
Submitted by:    Andrew Stuart <elitetek@subliminal.tekrealm.net>

Undo damage done by check if the SED could have been replaced by a
REINPLACE. Thanks to Patrick Li for spotting this.

Unbreak build of sysutils/lcdproc

PR:             ports/44213
Submitted by:   Sergei Kolobov <sergei@kolobov.com>

Add new port lcdproc - A client/server suite for all kinds of nifty
LCD devices