This is a library for reiserfs filesystem access and manipulation.
The primary goal is to develop the nice, full functionality library
wich might be linked against any projects which needed reiserfs filesystem
access. There are GNU Parted, GNU GRUB, Yaboot, Partimage, EVMS, etc.
progsreiserfs supports versions 3.5, 3.6 with standard and relocated journal.
===> The following configuration options are available for progsreiserfs-0.3.1.r8_8:
NLS=on: Native Language Support
===> Use 'make config' to modify these settings
filesystems: add new category for file systems and related utilities
The filesystems category houses file systems and file system utilities.
It is added mainly to turn the sysutils/fusefs-* pseudo-category into
a proper one, but is also useful for the sundry of other file systems
related ports found in the tree.
Ports that seem like they belong there are moved to the new category.
Two ports, sysutils/fusefs-funionfs and sysutils/fusefs-fusepak are
not moved as they currently don't fetch and don't have TIMESTAMP set
in their distinfo, but that is required to be able to push a rename
of the port by the pre-receive hook.
Approved by: portmgr (rene)
Reviewed by: mat
Pull Request: https://github.com/freebsd/freebsd-ports/pull/302
PR: 281988
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com>
(Only the first 15 lines of the commit message are shown above )
Rename all files containing a : in their filename.
While there, run make makepatch on affected ports, and rename patches
accordingly.
Sponsored by: Absolight
Cleanup DIST* variables.
When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup
With hat: portmgr
Sponsored by: Absolight
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include security/ sysutils/ textproc/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
[fix] sysutils/progsreiserfs: does not build on FreeBSD/amd64
In the 'Makefile' this port is marked to compile only on
FreeBSD/i386. It actually compiles and works on FreeBSD/amd64
also.
Maybe also on ia64?
PR: ports/87855
Submitted by: Simun Mikecin <numisemis@yahoo.com>
- add USE_GETOPT_LONG=yes and related patch
- add USE_LIBTOOL_VER=15 and remove *.la from pkg-plist
- disable NLS support if WITHOUT_NLS=yes is defined
- bump PORTREVISION
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Add progsreiserfs, a library for reiserfs filesystem access and manipulation.
For now progsreiserfs consists of:
1. libreiserfs, which have a number of high level APIs for access reiserfs
filesystem. There are: main filesystem code (reiserfs_fs_open,
reiserfs_fs_close,
resierfs_fs_create, reiserfs_fs_resize, reiserfs_fs_journal_tune, etc),
journal
code, bitmap code, directories and files access code and device abstraction
layer.
2. fouth progs which are simple frontends to libreiserfs. There are:
mkfs.reiserfs,
resizefs.reiserfs, cpfs.reiserfs, tunefs.reiserfs.
PR: ports/66590
Submitted by: Florent Thoumie <flz@xbsd.org>
