Port details |
- scterc Configure SCT ERC for hard disks on system startup
- 0.0.1 sysutils
=5 0.0.1Version of this port present on the latest quarterly branch. - Maintainer: amdmi3@FreeBSD.org
 - Port Added: 2014-01-31 19:48:38
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: collectd5, ugrep, go, clone, poudriere
- License: not specified in port
- WWW:
- https://github.com/AMDmi3/scterc-rc.d
- Description:
- Modern hard drives allow to set the amount of time a hard disk is
allowed to spend recovering from a read or write error. This feature
is called ERC (error recovery control, usually in Seagate), TLER
(time-limited error recovery, usually on Western Digital) or CCLT
(command completion time limit, usually on Samsung or Hitachi).
This rc.d script allows to set these valus on system startup to
tune disks for RAID usage.
¦ ¦ ¦ ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/sysutils/scterc/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/scterc
- pkg install scterc
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: scterc
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (AMDmi3-scterc-rc.d-0.0.1_GH0.tar.gz) = ec0baf6ca120c8e002df5d9acde67719ab79a0d5c9142e22a216576feb83c09d
SIZE (AMDmi3-scterc-rc.d-0.0.1_GH0.tar.gz) = 3145
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Runtime dependencies:
-
- smartctl : sysutils/smartmontools
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for scterc-0.0.1:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
- Options name:
- sysutils_scterc
- pkg-message:
- For install:
- To enable setting hard disk SCT ERC on system boot time, add the
following to your /etc/rc.conf:
scterc_enable="YES"
# specify hard disks to configure
scterc_disks="ada0 ada1"
# specify read and write timeouts in tenths of second
# here each is set to 7.0 seconds, which is also the default
# for which you may omit these lines
scterc_read_timeout="70"
scterc_write_timeout="70"
See /usr/local/share/doc/scterc/README.md for more info.
- Master Sites:
|
Number of commits found: 9
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
07 Sep 2022 21:58:51
    |
Stefan Eßer (se)  |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.0.1 07 Sep 2022 21:10:59
    |
Stefan Eßer (se)  |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.0.1 07 Apr 2021 23:19:01
    |
Dmitry Marakasov (amdmi3)  |
Remove useless Created by: headers mentioning me |
0.0.1 06 Apr 2021 14:31:07
    |
Mathieu Arnold (mat)  |
Remove # $FreeBSD$ from Makefiles. |
0.0.1 14 Aug 2019 12:16:13
  |
mat  |
Convert to UCL & cleanup pkg-message (categories s) |
0.0.1 01 Apr 2016 14:25:18
  |
mat  |
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight |
0.0.1 14 Jul 2015 12:32:13
  |
amdmi3  |
- Remove unncecessary full path to binary from *_DEPENDS |
0.0.1 07 May 2015 16:00:46
  |
amdmi3  |
- Drop GH_COMMIT |
0.0.1 31 Jan 2014 19:48:26
  |
amdmi3  |
Modern hard drives allow to set the amount of time a hard disk is
allowed to spend recovering from a read or write error. This feature
is called ERC (error recovery control, usually in Seagate), TLER
(time-limited error recovery, usually on Western Digital) or CCLT
(command completion time limit, usually on Samsung or Hitachi).
This rc.d script allows to set these valus on system startup to
tune disks for RAID usage.
WWW: https://github.com/AMDmi3/scterc-rc.d |
Number of commits found: 9
|