| Port details |
- stalepid Check for stale pid files and remove them
- 1.0.2_1 sysutils
 =1      1.0.2Version of this port present on the latest quarterly branch. - Maintainer: driesm@FreeBSD.org
- Port Added: 2003-12-09 08:36:17
- Last Update: 2024-03-29 08:19:03
- Commit Hash: 0f07158
- People watching this port, also watch:: sysinfo, rtty, tmpreaper, svk
- License: BSD2CLAUSE
- WWW:
- https://devel.ringlet.net/sysutils/stalepid/
- Description:
- The stalepid utility was developed to facilitate the startup of servers
that write their process ID to a file and refuse to start if that file
exists (e.g. when the process was last terminated by an unclean shutdown,
or simply killed without given the chance to clean up the process ID
file). The stalepid utility is used to check for and possibly remove
those stale process ID files. Upon its invocation, stalepid checks for
the following conditions:
- the file specified by the pidfile argument exists;
- it contains a single line, and the line contains a single number;
- there is no process with the process ID specified in the file, or if
there is one, it is not named processname.
If all those conditions are met, the stalepid utility will remove the
file specified by the pidfile argument, thus allowing the next invocation
of the server to proceed normally.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- stalepid>0:sysutils/stalepid
- To install the port:
- cd /usr/ports/sysutils/stalepid/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/stalepid
- pkg install stalepid
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: stalepid
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1551546599
SHA256 (stalepid-1.0.2.tar.gz) = b5281e67d799973f73392eafbef62ec2571d801f9c16e16fc579c663407eea1c
SIZE (stalepid-1.0.2.tar.gz) = 6059
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Runtime dependencies:
-
- p5-Error>=0 : lang/p5-Error
- perl5>=5.36<5.37 : lang/perl5.36
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- sysutils_stalepid
- USES:
- perl5 shebangfix uidfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.0.2_1
29 Mar 2024 08:19:03
 |
Yasuhiro Kimura (yasu) |
sysutils/stalepid: Move man page to share/man
Approved by: portmgr (blanket) |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.0.2
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.0.2
20 Jul 2022 14:23:05
|
Tobias C. Berner (tcberner) |
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com> (Only the first 15 lines of the commit message are shown above ) |
1.0.2
09 Nov 2021 10:31:38
|
Dries Michiels (driesm) |
*/*: Consistently use my new driesm@FreeBSD.org alias
Replace all occurences of driesm.michiels@gmail.com with
driesm@FreeBSD.org.
Approved by: philip (mentor), 0mp (mentor)
Differential Revision: https://reviews.freebsd.org/D32896 |
1.0.2
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.0.2
05 Mar 2019 14:14:36
 |
swills |
sysutils/stalepid: update to 1.0.2
While here, assign maintainership to submitter
PR: 236163
Submitted by: Dries Michiels <driesm.michiels@gmail.com> |
1.0.b1_1
01 Apr 2016 14:25:18
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight |
1.0.b1_1
02 Mar 2015 23:47:18
|
bapt |
Remove Author from pkg-descr and white space fixes |
1.0.b1_1
24 Sep 2014 06:00:10
|
eadler |
Hand back my ports to the pool.
Ports require time and TLC which I no longer have. |
1.0.b1_1
07 Sep 2014 20:02:32
|
antoine |
- Allow staging as a regular user
- Shebangfix |
1.0.b1
28 Sep 2013 03:48:23
|
eadler |
convert to staging. |
1.0.b1
20 Sep 2013 23:06:00
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils) |
1.0.b1
04 Aug 2013 12:30:54
|
az |
- Convert to new perl framework
Approved by: eadler@ (maintainer) |
1.0.b1
16 Jul 2013 21:59:48
|
eadler |
Remove now excess verbiage.
Reviewed by: bapt |
1.0.b1
08 Mar 2013 20:23:39
|
eadler |
Clean up my ports (and a couple of ports@ owned ones):
- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.
Reviewed by: drogoh (on irc) |
1.0.b1
06 Oct 2012 14:35:46
|
eadler |
Trim the headers in the ports I maintain. |
1.0.b1
06 Jun 2012 03:29:58
|
eadler |
Avoid the use of site perl
Submitted by: az |
1.0.b1
25 Feb 2012 14:40:24
|
eadler |
Take maintainership
Approved by: maintainer (implicit) |
1.0.b1
24 Oct 2011 09:11:38
|
dougb |
The vast majority of pkg-descr files had the following format when they
had both lines:
Author: ...
WWW: ....
So standardize on that, and move them to the end of the file when necessary.
Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.
s/AUTHOR/Author/
A few other various formatting issues |
1.0.b1
24 Oct 2011 04:17:38
|
dougb |
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file. |
1.0.b1
19 Mar 2011 12:38:54
|
miwi |
- Get Rid MD5 support |
1.0.b1
08 Sep 2007 01:04:03
|
linimon |
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr |
1.0.b1
24 Jan 2006 01:06:45
|
edwin |
SHA256ify
Approved by: krion@ |
1.0.b1
31 Mar 2004 03:12:58
|
trevor |
SIZEify (maintainer timeout) |
1.0.b1
06 Feb 2004 13:12:53
|
trevor |
Use PLIST_FILES (bento-tested, marcus-reviewed). |
1.0.b1
09 Dec 2003 08:34:26
|
roam |
Add stalepid-1.0pre1, a handy utility for checking and removing stale
pid files left over by daemons after unclean shutdowns. |
As an Amazon Associate I earn from qualifying purchases.