| Port details |
- u-boot-a64-olinuxino Cross-build das u-boot for model a64-olinuxino
- 2024.07 sysutils
 =2      2022.04_1Version of this port present on the latest quarterly branch. - Maintainer: uboot@FreeBSD.org
- Port Added: 2017-12-20 20:35:59
- Last Update: 2022-09-10 17:41:16
- Commit Hash: e79fe1a
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- License: GPLv2
- WWW:
- https://www.denx.de/wiki/U-Boot
- Description:
- U-Boot loader and related files for the A64-Olinuxino.
To install this bootloader on an sdcard just do:
dd if=/usr/local/share/u-boot/u-boot-a64-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=128k seek=1 conv=sync
For information about running FreeBSD on Allwinner boards, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- u-boot-a64-olinuxino>0:sysutils/u-boot-a64-olinuxino
- To install the port:
- cd /usr/ports/sysutils/u-boot-a64-olinuxino/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/u-boot-a64-olinuxino
- pkg install u-boot-a64-olinuxino
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: u-boot-a64-olinuxino
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1727176237
SHA256 (u-boot/u-boot-2024.07.tar.bz2) = f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f
SIZE (u-boot/u-boot-2024.07.tar.bz2) = 26086110
Packages (timestamps in pop-ups are UTC):
- Master port: sysutils/u-boot-master
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- gsed : textproc/gsed
- swig : devel/swig
- dtc>=1.4.1 : sysutils/dtc
- mkimage : sysutils/u-boot-tools
- py311-setuptools-pkg>=0 : devel/py-setuptools-pkg@py311
- aarch64-none-elf-gcc : devel/aarch64-none-elf-gcc
- e2fsprogs-libuuid>=0 : misc/e2fsprogs-libuuid
- gnutls>=0 : security/gnutls
- bl31.bin : sysutils/atf-sun50i_a64
- bison : devel/bison
- gmake>=4.4.1 : devel/gmake
- python3.11 : lang/python311
- pkgconf>=1.3.0_1 : devel/pkgconf
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- sysutils_u-boot-a64-olinuxino
- USES:
- bison compiler:c11 gmake python:build pkgconfig shebangfix ssl tar:bz2
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| This is a slave port. You may also want to view the commits to the master port: sysutils/u-boot-master |
| Commit | Credits | Log message |
|---|
2022.04_1
10 Sep 2022 17:41:16
 |
Stefan Eßer (se)
Author: Tobias Kortkamp |
Fix WWW in parent/child ports
Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
a) just using the pkg-descr from the parents
b) or had their own separate pkg-descr with custom WWW
Use WWW?= in parents when the child's WWW is different.
Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.
Approved by: portmgr (implicit) |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2022.04_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2021.04
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
2021.04
07 Apr 2021 07:57:52
|
Emmanuel Vadot (manu) |
sysutils/u-boot-*: Update to 2021.04 |
2020.10_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2020.10_1
22 Nov 2020 17:37:40
 |
manu |
sysutils/atf: Update to v2.4
Bump u-boot ports that depends on it.
While here update the metadata and pkg-descr for the allwinner64 family so
u-boot is put in an alternate location that doesn't conflict with GPT
partitions. |
2019.10
08 Nov 2019 09:17:05
|
lwhsu |
Use HTTPS as possible |
2018.03
18 Jun 2018 20:22:13
|
linimon |
Consolidate maintainership of various u-boot ports under u-boot@.
Submitted by: manu
Differential Revision: D15884 |
2018.03
18 Jun 2018 19:51:23
|
linimon |
Update the instruction and description of the u-boot ports which use
u-boot-master.
Submitted by: manu
Differential Revision: D15883 |
2017.09.00_1
20 Dec 2017 20:35:49
|
manu |
Add sysutils/u-boot-a64-olinuxino
A64-Olinuxino is a Single Board Computer based on the Allwinner A64 SoC.
Reviewed by: bapt
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D13562 |
As an Amazon Associate I earn from qualifying purchases.