textproc/dict: Update to 1.13.3

Changes:	https://github.com/cheusov/dictd/blob/dictd-1.13/NEWS

textproc/dict: Update to 1.13.2

Changes:	https://github.com/cheusov/dictd/blob/dictd-1.13/NEWS

*/*: Remove GNU_CONFIGURE_MANPREFIX=${PREFIX}/share after
9fd7ee1cdf6cbd5528159b58a966e1a40e2909a9

textproc/dict: Update WWW and clean up pkg-descr

textproc/dict: Update manpage location
(003a571d1d6585196545295efc181514f171c4c4, r523104)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

textproc/dict: Update to 1.13.1

Changes:	https://github.com/cheusov/dictd/blob/master/doc/NEWS

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Update to 1.13.0

- Update WWW

Changes:	https://github.com/cheusov/dictd/blob/master/NEWS

Update to 1.4.1

- Change MASTER_SITES from SF to GitHub
- Update LICENSE
- Use PLIST
- Update WWW
- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/cheusov/libmaa/blob/master/doc/NEWS

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE
- Use USES=localbase

- Remove unrecognized CONFIGURE_ARGS
- Silence patch message
- Cosmetic change
- Reformat pkg-descr
- Add sourceforge to WWW
- Sort PLIST
- Take maintainership

Reset maintainership:
- Lots of maintainers timeout
- unresponsive for almost a year

PR:		195059

- Switch to USES=libtool:build
- Use @sample

- Swith to USES=libtool

Approved by:	portmgr blanket

- Convert to staging
- Use new LIB_DEPENDS
- Add license

Sponsored by:	Absolight

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update to 1.12.1

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Bump PORTREVISION for devel/libmaa shlib change

- Update to 1.12.0

Sync to new bsd.autotools.mk

- Update to 1.11.2

PR:             ports/141451
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet_AT_sunpoet dot net>

Remove "Josh Gilliam <josh@quick.net>" from the last few pkg-descr's
where it appears. Mail to that address bounces now, and has for years.

Not having stale e-mail addresses in the pkg-descr files helps avoid
user confusion when looking for someone to contact for help with a port.

- Bump PORTREVISION to chase the update of devel/libmaa

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Update to 1.11.1

- Update to 1.11.0

PR:             ports/130155
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet_AT_sunpoet dot net>

- Update to 1.10.11

- Update to 1.10.10

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Update to 1.10.9

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- update to 1.10.8
- I'll maintain it for a while

dd@ has had his port bit taken for safekeeping.  Therefore, return these
to the pool.

Hat:            portmgr

Remove USE_REINPLACE from categories starting with T

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by: krion@

Avoid clobbering a modified dict.conf on deinstall.

PR:             91294
Submitted by:   Rong-En Fan

Upgrade to 1.10.4.

Submitted by:   Andy Miller

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Upgrade to 1.10.1. Drop the dependency on ltdl; the client never used
it, and the server seems to work okay with the native implementation.
The patch to libmaa/decl.h is no longer necessary because the
distribution already includes that test (the other libmaa patches still
apply--I'm not sure that they're really necessary any more, but they
don't hurt).

Upgrade to 1.9.15

Submitted by:   Andy Miller <andy@trit.org>, vs

Upgrade to 1.9.14

Submitted by:   Andy Miller <andy@trit.org>

Sync with new bsd.autotools.mk

Upgrade to 1.9.13

Submitted by:   Andy Miller <andy@trit.org>

Add missing file and manpage

Convert all but one port that uses libtool14 to use libtool15, in readiness
for the destruction of devel/libtool14

Upgrade to 1.9.11

Submitted by:   Andy Miller <andym@trit.org>

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

This new version of dict(1) doesn't seem to default to using
dict://dict.org if the config file is absent, so install a config file
with some default servers instead of making the user rummage through
the man page and the web to figure out how to make this work.

Noticed by:     ceri

Upgrade to 1.9.10

Submitted by:   Andy Miller <andym@trit.org>

Avoid building lstat.o since we have lstat in libc.

Put C*FLAGS into CONFIGURE_ENV instead of assigning it directly.  This
allows configure-run test programs to find the right include files and
libraries.

Breakage reported by:   many
Fix submitted by:       adamw

Removed empty file.

Upgrade to 1.9.7.

PR:             57810
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Fix build on sparc64

Upgrade to 1.8.0.

Convert to use REINPLACE_CMD and consequently remove USE_PERL5.  The
distribution comes with one Perl script, but it appears to be
auxiliary (there are no references to it anywhere except the
documentation).  dict works fine without Perl.

Submitted by:   clive

Upgrade to 1.7.1.  patch-ac has been submitted to the maintainers.

I'll look after this port.

To ports@freebsd.org.

We don't need to patch `configure' as much as this patch was doing.   We can
accomplish the same thing with a CONFIGURE_ARGS.    

Update to version 1.5.5.    

More style fixes for ports/textproc.    

Add $FreeBSD$'s which help me in problem reports.    

Convert category textproc to new layout.