textproc/liblrdf: Update WWW and download from official repo

Point port to repo hosted on GitHub

Reference: https://sourceforge.net/projects/lrdf/

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

textproc/liblrdf: update to 0.6.1

While here:

* Reorder some variables.
* Remove post-patch section
* Regenerate patch with makepatch

Accumulated change log:

* Remove a bogus symlink, and release some merged changes that resolve licence
issues.
* Removed more stale auto* files

Reported by:	portscout
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D17422

Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/

textproc/liblrdf: drop unused dependencies

PR:		214384
Reported by:	readelf(1)

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
  --disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
  aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU.  The code wanted to use BYTE_ORDER
  defined in machine/endian.h, but this isn't visible because ICU is
  compiled with _XOPEN_SOURCE.  Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
  without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
  pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
  a C++11 runtime library now.  Add this to all ports that depend on it
  so their executables load the right libstdc++.so on FreeBSD 9.

PR:		205120
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Bump PORTREVISION for the icu revert.

This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.

PR:		205120
With hat:	portmgr
Sponsored by:	Absolight

devel/icu: bump PORTREVISION on dependent ports

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE
- Strip library

Update icu to 55.1

The distfile contains symlinks to non-existent system files.  Remove them
so autoreconf works.

Reported by:	antoine

Convert to USES=autoreconf

Cleanup plist

- Add USE_AUTOTOOLS=autoheader and USES=libtool
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Stage support

Chase boost and icu bump
While here convert some LIB_DEPENDS

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update devel/automake to 1.14
- Update devel/gettext to 0.18.3
- Fix known-broken (from exp-runs) ports
- Clean up a lot of cruft in the devel/gettext port itself,
  based on work from tijl@

PR:		178883
Submitted by:	ade
Sponsored by:	Wadsworth 6X

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

Finish converting the whole ports tree to USES=pkgconfig

Fix build

Reported by:	bdrewery

Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.

- Bump after devel/icu update
- Add missing deps, pkg-config is required during build
- Fix typo in pkg-descr

Make the port build if textproc/raptor is installed.

Both textproc/raptor and textproc/raptor2 provide a raptor.h header; the
former puts it in ${LOCALBASE}/include, whereas the latter puts it into
${LOCALBASE}/include/raptor2.

The way CPPFLAGS and LDFLAGS were changed so far, -I${LOCALBASE}/include was
passed to the compiler before -I${LOCALBASE}/include/raptor2, so the raptor1
headers were picked up and the build failed.

The fix is consists of several separate adjustments:
  - The port only depends on raptor2 (and obtains the required compiler and
    linker flags via pkg-config) and optionally on OpenSSL from ports in
    case one has installed it.
    We thus need USE_OPENSSL and OPENSSLINC/OPENSSLLIB.
  - Due to the other the CFLAGS are defined in the port's configure.ac, we
    need to make raptor2's CFLAGS be passed before the rest, so
    -I${LOCALBASE}/include/raptor2 is passed to the compiler before other
    paths such as the infamous ${LOCALBASE}/include.
  - We need to change CFLAGS instead of CPPFLAGS, otherwise the OpenSSL
    CFLAGS still come before the actual CFLAGS and the problem persists.

- Update to latest github snapshot (tagged 0.5.0; fetch distfile from Gentoo)
  and switch to textproc/raptor2 (required for upcoming audio/ardour update)
- Do some small Makefile cleanups and touch port description while I am here
- Teach configure script of audio/aqualung to use `pkg-config --cflags lrdf`,
  so it can always find correct headers

Submitted by:	nox@ (a while ago)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

Sync to new bsd.autotools.mk

- Split redland to rasqal and redland itself libraries
- Update raptor to 1.4.21
- Update rasqal to 0.9.19
- Update redland to 1.0.10
- Update redland-bindings to 1.0.10.1
- Bump portrevision on depended ports

With hat on:    kde@

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Use libtool port instead of included one to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include security/ sysutils/ textproc/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

* Add SHA256 checksums for maintainerless ports i added to the ports collection
* Remove my name from blop pkg-descr
* Grab back maintainership for netio

Update to version 0.4.0

PR:             ports/80545
Submitted by:   Ports Fury

- Update to version 0.3.7

PR:             ports/69116
Submitted by:   Ports Fury

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Rearrange USE_GNOME
Don't install .la file

PR:             63499
Submitted by:   KATO Tsuguru

Update to 0.3.5
Drop Maintainership

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Chase raptor shlib version raise.

Update to 0.3.2

Chase shlib version of raptor

Forgotten by:   krion

Update to  0.3.1

Add build dependency on LADSPA

Submitted by:   bento

Add ${PTHREAD_LIBS}

Submitted by:    ydg <ydg@cox.net>

Add liblrdf, a library for manipulating RDF files describing LADSPA plugins.