Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove warnings about installing documentation and examples. The only users
who will see those messages are users who have already accepted those options
in make config.

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Cleanup plist

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Use new USES=dos2unix

- Update to 2.40
- Add LICENSE
- Sort *_DEPENDS
- Convert to new options framework
- Use USES=shebangfix
- Respect EXAMPLES

Changes:	http://search.cpan.org/dist/Spreadsheet-WriteExcel/Changes

Support STAGEDIR.

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

- Convert to new Uses/perl5.mk framework
- Resolve issues with implicit lang/perl in extract and patch dependencies
- Trim Makefile header

Reviewed by:	bapt@ (exp-run)
Approved by:	bapt@ (portmrg@)

Update to 2.39.

Changes:	http://search.cpan.org/dist/Spreadsheet-WriteExcel/Changes

Update to 2.38.

Changes: http://search.cpan.org/dist/Spreadsheet-WriteExcel/Changes

- Remove SITE_PERL from *_DEPENDS

Submitted by:   az@

Pass maintainership of almost of my "p5-*" ports to "perl@".

(I hope updating of them will be improved).

- Respect NOPORTDOCS
- No PORTREVISION bump because the port has been broken with NOPORTDOCS set

PR:             ports/164945
Submitted by:   scheidell (me)
Approved by:    skv (maintainer, via private mail), gabor (mentor)

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr

-remove MD5

Update to 2.37

Changes:       
http://cpansearch.perl.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.37/Changes
PR:             ports/144032
Submitted by:   max

- Remove unneeded dependencies which is in perl-5.8.9 dist
  (part 3).

Approved by:    portmgr (itetcu)

- replace ${SITE_PERL}/${PERL_ARCH}/Date/Calc.pm with ${SITE_PERL}/Date/Calc.pm
for ${PORTSDIR}/devel/p5-Date-Calc

Update to 2.25

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.25/Changes

Update to 2.23

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.23/Changes

Update to 2.22

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.22/Changes

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

Update to 2.20

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.20/Changes

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

Update to 2.18

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.18/Changes

Update to  2.17

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.17/Changes

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Update to 2.16

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.16/Changes

Update to 2.15

Changes:       
http://search.cpan.org/src/JMCNAMARA/Spreadsheet-WriteExcel-2.15/Changes

Update to 2.14

Update to 2.13

Update to 2.12

Updated to 2.11

PR:             ports/73314
Submitted byL   lth

Updated to 2.04

Updated to 2.03

PR:             ports/69775
Submitted by:   Lars Thegler <lth@FreeBSD.org>

Updated to 0.43

SIZEify (maintainer timeout)

Updated to 0.42

Updated to 0.41

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Updated to 0.40

Conditionalise several dependencies on PERL_LEVEL to make those ports more
friendly for perl-5.8.0, which has those dependencies included into the
base distribution.

Sponsired by:   Porta Software Ltd

Updated to 0.39

Updated to 0.38

Fix BUILD_DEPENDS.

Updated to 0.37

Update to 0.25, clean port files.

Approved by:    markm

Update to 0.34.    

- update to 0.33   - install documentation   - install examples in
${PREFIX}/share/examples/Spreadsheet-WriteExcel (instead     of inside of
${SITE_PERL}/Spreadsheet/WriteExcel/examples/)   - sort pkg-plist    

Update port: p5-Spreadsheet-WriteExcel to 0.31    

Remove do-configure section, use PERL_CONFIGURE now.    

Update to version 0.24.    

More style fixes for ports/textproc.    

Add p5-Spreadsheet-WriteExcel 0.23, a perl module to write formatted text   and
numbers to a cross-platform Excel binary file.