Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Clean up the rest of the perl@ Makefiles a bit.

- Remove dependencies on modules distributed as part of perl core
- Remove references to FreeBSD < 8 and perl < 5.16
- Ensure that DOCS and EXAMPLES options exist for ports installing
  PORTDOCS or PORTEXAMPLES
- Reduce unnecessary inclusions of bsd.port.options.mk by using
  OPTIONS helpers and the like
- Fix some cases where dependencies were only assigned to BUILD_DEPENDS
- Fix a few of the cases where dependencies were only assigned to RUN_DEPENDS.
  This one happens in many, many ports. I only applied it in cases where
  it interfered with 'make test' but it should maybe be done more generally.
- Mute ${MKDIR} in installation
- Parethesize compound commands
- In www/p5-URI-Fetch, remove the ZLIB option that wasn't used

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Remove trailing whitespaces from category textproc

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Try and be consistent with what commands are silent and not in *install.

- MKDIR is silent
- ECHO is silent
- INSTALL_* are not silent
- CP/FIND/... are not silent

I fixed a few PORTDOCS misusage, I'll do a second pass.

With Hat:	perl@

- Update to 1.79
- Support STAGEDIR

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update to 1.78
- Sort TEST_DEPENDS
- Move PORTDOCS upward

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

- Add WWW
- Use single space after WWW:
- Remove Author line

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

Update to 1.77.

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

- Update to 1.76
- Add LICENSE (Artistic 1 & GPL 1)
- Remove leading article from COMMENT

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

Update to 1.75.

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

- update to 1.73

Changes:	http://cpansearch.perl.org/src/TMHARISH/XML-Smart-1.73/Changes

Update to 1.71.

Changes:	http://search.cpan.org/dist/XML-Smart/Changes

- Remove SITE_PERL from *_DEPENDS

Submitted by:   az@

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Cleaning MD5 in perl@'s ports

Approved by:    erwin@ (portmgr)

Reset mat@FreeBSD.org due to maintainer-timeouts and no response to email.

Hat:            portmgr

Use the CPAN site macro.
Use DISTVERSION in place of DISTNAME where possible.
Remove perl 5.005 shims.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Be hipe and add SHA256

Let the IGNORE message make a bit more sense and change it from:

===>  p5-Some-Module-0.7 Port requires perl 5.6.x or later. Install
lang/perl5 then try again.

to:

===>  p5-Some-Module-0.7 requires perl 5.6.x or later. Install
lang/perl5 then try again.

Approved by:    silence on -ports

Update to 1.6.9

Update to 1.6.8

Update to 1.6.7

Update to 1.6.6

Update to 1.6.5

Update to 1.6.4

Update to 1.6.1

Update to 1.6

Update to 1.5.9

Update to 1.5.7

Update to 1.5.6

Update to 1.5.4

Update to 1.5.3

Update to 1.5.2

Update to 1.5.1

Add SIZE field

Update to 1.5

Update to 1.4.1

Forgot 5.6.x requirement

Add p5-XML-Smart
A Smart, easy and powerful way to access/create XML files/data.

PR:             57847
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>