textproc/raptor: Remove expired port

2023-09-30 textproc/raptor: No new release in 10+ years and superseded by
2.0-branch, consider using textproc/raptor2

textproc/raptor: Deprecate and set expiration date to 2023-09-30

No new release in 10+ years and superseded by 2.0-series available at
textproc/raptor2. No consumers in tree and upstream have posted
migration instructions.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

Remove # $FreeBSD$ from Makefiles.

textproc: Add missing USES={gnome,php}

Remove libcurl.so.7 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Strip libraries

Cleanup plist

- Add USES=libtool to textproc/raptor and bump dependent ports
- Add DOCS option and install documentation in standard location
- Silence post-patch

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

textproc/raptor: release maintainership, KDE ports don't depend on this port

- Support staging [1]
- Use the new LIB_DEPENDS syntax

Submitted by:	Schaich Alonso <alonsoschaich@fastmail.fm> [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

Import patch from Debian that backports the fix for CVE-2012-0037 from 2.0.7.

This patch also happens to contain the curl fix in
patch-src_raptor_internal.h, which has thus been removed.

Bump PORTREVISION.

Security:       CVE-2012-0037
Feature safe:   yes

- Revert previous commit about curl/types.h removal: ale@ has committed a patch
file already

Notified by:    ale
Feature safe:   yes

- Fix build with curl 7.24.0: curl/types.h was removed (unused since Apr 2004)

Submitted by:   sunpoet (myself)
Tested by:      exp-run by linimon
Approved by:    linimon (with portmgr hat)

- Fix build after recent curl update
- Remove unrecognized configure arg

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10

Reported by:    pointyhat

- Stop installing the rapper binary with raptor and bump PORTREVISION.
- Update raptor2 to 2.0.4.
- Update rasqal to 0.9.27.
- Update redland to 1.0.14.
- Update redland-bindings to 1.0.13.1.
- Update shared-desktop-ontologies to 0.8.0. [1]
- Update soprano to 2.7.0 and disable clucene indexer.
- Update strigi to 0.7.6.

PR:             157022 [1]
Submitted by:   rakuco [1]

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

- Split redland to rasqal and redland itself libraries
- Update raptor to 1.4.21
- Update rasqal to 0.9.19
- Update redland to 1.0.10
- Update redland-bindings to 1.0.10.1
- Bump portrevision on depended ports

With hat on:    kde@

- Add OPTIONS for mpfr/gmp for redland
- While here, pass raptor/redland maintainership to kde@ per maintainer's
request

PR:             146157
Submitted by:   Kenyon Ralph <kenyon@kenyonralph.com>
Approved by:    maintainer

Chase the ftp/curl shlib version bump.

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

- Update to 1.4.18

PR:             134159
Submitted by:   Wen Heping <wenheping@gmail.com>
Approved by:    maintainer

Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Update to 1.4.16

PR:             119781
Submitted by:   chuck@pkix.net (maintainer)

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 1.4.15.

PR:             ports/114537
Submitted by:   trasz
Approved by:    maintainer, miwi (mentor)

Update the ftp/curl port to 7.16.0.
Bump PORTREVISION of all dependent ports.
Fix the build errors in the few ports that still use the long deprecated,
and now obsoleted, cURL options.

Thanks to everyone who took the time to look over the patch!

Discussed on:   -ports

- Update to 1.4.13

PR:             ports/106458
Submitted by:   Charles Swiger <chuck@pkix.net> (maintainer)

- Fix MASTER_SITES

Pointy hat to:  erwin

- Update to 1.4.9
- Fix MASTER_SITES

PR:             96623
Submitted by:   Ion-Mihai IOnut Tetcu <itetcu@people.tecnik93.com>
Approved by:    maintainer

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

update port: textproc/raptor to v1.4.8

        Update raptor port to latest version.  Please note that the
        diff is missing a SHA256 checksum (adding one would be good
        :-).

PR:             ports/91371
Submitted by:   Charles Swiger <chuck@pkix.net>

- Add SHA256

Requested by:   maintainer

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update to 1.4.7

PR:             87341
Submitted by:   Charles Swiger <chuck@pkix.net> (maintainer)

- Update to 1.4.5
- Take maintainership

PR:             ports/77242
Submitted by:   Charles Swiger <chuck@pkix.net>

Update to version 1.4.3

PR:             ports/75955
Submitted by:   Ports Fury

. Update to 1.4.2.

PR:             73476
Submitted by:   Ports Fury

Update to version 1.4.1

PR:             ports/73351
Submitted by:   Ports Fury

Update to version 1.3.3

PR:             ports/72329
Submitted by:   Ports Fury

Update to version 1.3.2

PR:             ports/69583
Submitted by:   Ports Fury

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Update to 1.3.1

PR:             ports/68392
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update ftp/curl to 7.12.0 and bump the shared library version in all
dependent ports.

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

SIZEify.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Update to version 1.2.0

PR:             ports/61956
Submitted by:   Ports Fury

- Update to 1.1.0

PR:             ports/60844
Submitted by:   Vincent Tantardini <vinc@FreeBSD-fr.org>

- Update to version 1.0.0

PR:             56636
Submitted by:   Ports Fury

- Update to version 0.9.12

PR:             56041
Submitted by:   Ports Fury

* Update to version 0.9.11

PR:             55066
Submitted by:   Ports Fury
Approved by:    fjoe (mentor) (implicit)

upgrade to 0.9.10

upgrade to 0.9.9

De-pkg-comment.

Change CPPFLAGS+=/LDFLAGS+= to CPPFLAGS=/LDFLAGS=.

Submitted by:   Ports Fury

Conditionalize libgnugetopt dependencies.

PR:             ports/47758
Submitted by:   Ports Fury

upgrade to 0.9.7

PR:             46425
Submitted by:   Ports Fury

Ensure that libexpat is not detected.

PR:             ports/45633
Submitted by:   Ports Fury

s/expat2/libxml2/ in LIB_DEPENDS to fix build on -current.

Upgrade to 0.9.6.

PR:             ports/45448
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Bump PORTREVISION and expat shlib.

Bump portrevision (textproc/expat2 shlib bump).

Update to version 0.9.5.

PR:             40627
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

add raptor   RDF Parser Toolkit for Redland