MAN[1-5]PREFIX: eleminate its usage  and move man to share/man

*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

lx's ports: Reset maintainer to ports@ per his request

Sponsored by:	The FreeBSD Foundation

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories [t-u])

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Cleanup plist

Package something

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories T-V.

CR:		D509
Approved by:	portmgr (antoine)

Update to 4.03.

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

- update png to 1.5.10

-remove MD5

Bump PORTREVISION after open-mofit update

Distfile was re-rolled to be updated to 3.89.

Submitted by:   pointy/erwin

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update to 3.87.

Submitted by:   QAT (checksum breakage)
Feature safe: yes

- update to jpeg-8

Update to 3.85.

Update to 3.81.

Pointedoutby: pavmail

Update to 3.80.

Update to 3.79.

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

Update to 3.77 and take maintainership.

Approved by:    bsam@ (old maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- update from 3.74 to 3.76:

  Changes between versions 3.75 and 3.76
  ______________________________________
  Fix ignoring of %%tth: before LaTeX \item. 31 Aug 06

  Changes between versions 3.74 and 3.75
  ______________________________________
  Make fatal error exits more systematic.
  Implement orderly termination at return value in tthfunc.

- change my email to FreeBSD.org one.

Update to 3.74. Please 'make distclean' before reporting problems with
distfile.

PR:             ports/97610
Submitted by:   maintainer

Update to 3.72

PR:             ports/91988
Submitted by:   Boris B. Samorodov (maintainer)

BROKEN: Size mismatch

- Update to 3.71: Fix fetch of unversioned distfile

Approved by:    Boris Samorodov <bsam@ipt.ru> (maintainer)

Pass maintainership to Boris Samorodov <bsam@ipt.ru>
who submitted the last update.

- Unbreak by updating to 3.70 [1]
- Pet portlint
- Make pkg-message ${PREFIX}-clean

Submitted by:           "Boris B. Samorodov" <bsam@ipt.ru>
PR:                     ports/89035

BROKEN: Size mismatch

Update to latest version 3.59 [*]
Move package files from pkg-plist to Makefile, remove
unnecessary pkg-plist.
Remove MASTER_SITE_LOCAL from MASTER_SITES list, because it containes
old version distro.

Spotted by:     Professor Jeffrey Racine <jracine@maxwell.syr.edu>
Submitted by:   Sergey 'DoubleF' Zaharchenko <doublef@tele-kom.ru> [*]
PR:             64695

Use the new ghostscript options.

Submitted by:   linimon

Pacify distfile survey.

KATO mega patch

- ECHO -> ECHO_MSG

For some ports:
- pre-fetch -> pre-everything
- ECHO -> ECHO_CMD

PR:             ports/56820-56858
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

[PATCH] textproc/tth: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54954
Submitted by:   Jens Rehsack <rehsack@liwing.de>

De-pkg-comment.

- PORTDOCS police   - DOCSDIR support to some   - Brush out some lint    

Replace the ghostscript6 dependencies with ghostscript-gnu.    

More style fixes for ports/textproc.    

Initialise Deorbiting Burn Sequence [tm, (c) 2000, PHK] for pnmtopng port.    

Change PKGDIR from pkg/ to .  Also fix places where ${PKGDIR} is   spelled out
(many of which are ${PKGDIR}/MESSAGE -> ${PKGMESSAGE} type   fixes that
shouldn't have been necessary) and the string "/pkg/"   appear.    

Convert category textproc to new layout.  

Upgrade to 2.78.    

Use MASTER_SITE_LOCAL.    

Upgrade to 2.72.