uim aims for multilingual input method library.
It works as an XIM server or an input module of GTK+ 2.x.
And currently it supports following input methods.
Chinese: Pinyin
Japanese: Anthy, Prime, SKK, T-code, TUT-code
Korean: Hangul, Romaja
Vietnamese: VIQR
Other: IPA
This port installs Emacs lisp files for uim.
===> The following configuration options are available for uim-el-1.9.9:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
textproc/uim: Update to 1.9.7
- Remove textproc/uim-gtk2 because the upstream dropped gtk2 support
- Add textproc/uim-gtk4
- Bump PORTREVISION of textproc/uim consumers
Emacs Lisp ports framework: Overhaul
This overhaul introduces four key changes to the elisp ports framework:
1. Remove support for packaged byte-compiled elisp.
The primary motivation is to remove a large number of flavor-specific
packages and to simplify the ports tree. As an example, supporting
byte-compiled elisp for devel/tablist required six packages, one for
each flavor of editors/emacs and editors/emacs-devel. With over 100
elisp ports and requests for new Emacs flavors, this was
unmanageable.
2. Install configuration to integrate with Emacs's native compilation
machinery, allowing elisp from ports to be compiled into the standard
(Only the first 15 lines of the commit message are shown above )
textproc/uim: Update to 1.9.1
- Add japanese/uim-anthy-unicode port that supports Anthy Unicode
(japanese/anthy-unicode)
- Bump PORTREVISION of the ports that depend on textproc/uim port
textproc/uim: Update to 1.9.0
- Add RUN_DEPENDS on japanese/skk-jisyo
- Fix default SKK-JISYO.L dictionary file path setting for SKK input method
- Rename textproc/uim-gtk port to textproc/uim-gtk2
- Add textproc/uim-qt6 port of Qt6 input method module
- Bump PORTREVISION of the ports that depend on textproc/uim port
Chase major version update of editors/emacs-devel
Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.
Sponsored by: The FreeBSD Foundation
Chase editors/emacs update to 29.4
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish, yasu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45705
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
devel/autoconf: update to 2.71
- Copy devel/autoconf to devel/autoconf2.69.
- Update devel/autoconf to 2.71.
- Allow ports to use 2.69 with USES=autoreconf:2.69.
PR: 258046
Exp-run by: antoine
textproc/uim: Update to the snapshot on 2021-01-04.
- Use GTK+ 3 as default GUI toolkit.
- textproc/uim-qt5 installs KDE Plasma 5 applet.
- Bump PORTREVISION of ports that depends on textproc/uim
editors/emacs: Update to version 27.1
Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
editors/emacs-devel: Update to latest master branch commit, 4f2b415
This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.
Submitted by: ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D23012
Bump PORTREVISION for ports using EMACS_VERSION_SITE_LISPDIR
This is required after editors/emacs was updated to version 26.3 in
r510281.
Reported by: ashish
Bump PORTREVISION for ports using EMACS_VERSION_SITE_LISPDIR
This should have been done with r499179 when editors/emacs was updated
to version 26.2.
Reported by: nobutaka
Flavorize and modernize Emacs ports
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
GOOGLE_CODE has gone away.
- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN
Some ports have a local mirror configured but for security reasons, it
is not considered upstream.
Sponsored by: Absolight
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Split devel/gettext in devel/gettext-runtime and devel/gettext-tools. The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt. Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.
USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools. USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.
Update gettext to 0.19.3.
Remove :oldver from converters/libiconv and devel/gettext-runtime. Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports. When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.
Fix some ports that installed files in lib/locale instead of share/locale.
PR: 194038
Reviewed by: bapt
Exp-run: antoine
Approved by: portmgr (antoine)
- Convert texproc/uim and friends to USES=libtool, drop .la files
- Bump ports dependent on uim as some .so versions have changed
- While here, convert some USE_BZIP2 to USES=tar:bzip2
Approved by: portmgr blanket
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
(Only the first 15 lines of the commit message are shown above )
GNU Emacs updates
editors/emacs:
- Update to 24.3
- Update CANNA patchset[1]
- Unbreak ARM support by using the patch from emacs-devel port
- Add missing INSTALLS_ICONS[2]
- Remove a patch which is already integrated upstream
- Fix Makefile header
editors/emacs-devel:
- Update to bzr revision 112178
- Fix Makefile header
- Add missing INSTALLS_ICONS[2]
(Only the first 15 lines of the commit message are shown above )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- Update to 1.6.0.
- Add textproc/uim-kde4, KDE4 panel applet of uim input method. It is a
slave port of textproc/uim.
- Remove japanese/uim-canna and japanese/uim-prime. Now the canna and prime
modules are implemented as scheme scripts and they can be installed from
textproc/uim.
- Enable helper tools installation of textproc/uim-qt4.
- Enable sj3 support of textproc/uim.
Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!). [1]
Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.
Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.
Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Chase change in bsd.sites.mk to support MASTER_SITES on googlecode.com
where the portname does not match the projects hostname.
PR: ports/121453 (related)
Submitted by: Edwin Groothuis <edwin@mavetju.org>
Reviewed by: pav@
Number of commits found: 114 (showing only 100 on this page)
