textproc/xerces-c3: Update to 3.3.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=10510&version=12355023

textproc/zorba: Switch dependency

As tidy-lib has been deprecated switch to www/tidy-html5.

devel/icu: update to 74.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-74-1
Reported by:	GitHub (watch releases)
PR:		274317
Exp-run by:	antoine (incomplete)
Approved by:	fluffy

devel/icu: update to 73.1

- Temporarily switch to GitHub auto archive (release artifacts are N/A atm)

Changes:	https://github.com/unicode-org/icu/releases/tag/release-73-1
Reported by:	GitHub (watch releases)
PR:		270422
Exp-run by:	antoine

Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

devel/icu: update to 72.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-72-1
Reported by:	GitHub (watch releases)
PR:		266582
Exp-run by:	antoine

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

devel/icu: update to 71.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-71-1
Reported by:	GitHub (watch releases)
PR:		262654
Exp-run by:	antoine
Approved by:	fluffy

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

devel/icu: update to 70.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-70-1
Reported by:	GitHub (watch releases)
PR:		258794
Exp-run by:	antoine

devel/icu: update to 69.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-69-1
Reported by:	GitHub (watch releases)

Remove # $FreeBSD$ from Makefiles.

devel/icu: update to 68.1

Changes:	http://site.icu-project.org/download/68
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by:	GitHub (watch releases)

textproc/zorba: Fix build with llvm11

Fix the build of textproc/zorba with llvm11.
NULL isn't a boolean, fix this by returning false instead of NULL from bool
functions.

MFH:		2020Q3 (implicit, llvm11 fixes)

Move devel/swig30 to devel/swig and update to 4.0.1

- Do not silence installation message
- Update dependent ports:
  - Fix build with swig 4.0.1
  - Update *_DEPENDS
  - Remove BINARY_ALIAS

Changes:	http://www.swig.org/news.php
PR:		246613
Exp-run by:	antoine

devel/icu: update to 67.1

Changes:	http://site.icu-project.org/download/67
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by:	GitHub (watch releases)

devel/icu: update to 66.1

Changes:	http://site.icu-project.org/download/66
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/

textproc: Add missing USES={gnome,php}

devel/icu: update to 65.1

Changes:	http://site.icu-project.org/download/65
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

devel/icu: update to 64.1

Changes:	http://site.icu-project.org/download/64
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
PR:		236325
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D19479

Update devel/doxygen to 1.8.15

PR:		236110

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

devel/icu: update to 63.1

Changes:	http://site.icu-project.org/download/63
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
PR:		232300
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

devel/icu: update to 62.1

Changes:	http://site.icu-project.org/download/62
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
PR:		229359
Exp-run by:	antoine (only 10.4)

devel/icu: update to 61.1

Changes:	http://site.icu-project.org/download/61
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
PR:		227042
Exp-run by:	antoine
MFH:		2018Q2 (required by Firefox 61)

textproc/zorba: unbreak with ICU 61

In file included from src/functions/func_any_uri.cpp:27:
In file included from src/functions/func_any_uri.h:30:
In file included from src/functions/function_impl.h:25:
In file included from src/context/static_context.h:43:
In file included from src/zorbautils/hashmap_zstring.h:23:
src/util/utf8_util.h:784:22: error: unknown type name 'Collator'; did you mean
'UCollator'?
  return static_cast<Collator*>( collation->getCollator() )->compare(us1, us2);
                     ^~~~~~~~
                     UCollator
/usr/local/include/unicode/ucol.h:58:26: note: 'UCollator' declared here
typedef struct UCollator UCollator;
                         ^
In file included from src/runtime/full_text/default_tokenizer.cpp:25:

textproc/zorba: Fixed plist

Additional port changes:
* Added CATEGORIES=java
* Added LICENSE_FILE
* Added CONFLICTS_BUILD=bison
* Added USES=libedit
* Added MAKE_JOBS_UNSAFE
* Bumped PORTREVISION (new dependency libedit)

PR:		221998
Submitted by:	groot@kde.org
Approved by:	tcberner (mentor, implicit)

Update devel/doxygen to 1.8.14

PR:		225290
Submitted by:	Naram Qashat (maintainer)

Switch from swig 2.0 to swig 3.0

devel/icu: update to 60.1

Changes:	http://site.icu-project.org/download/60
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
PR:		223373
Exp-run by:	antoine

Those non default PYTHON options do not build/stage/package, mark them
BROKEN.

Sponsored by:	Absolight

devel/icu: update to 59.1

- Temporarily keep C++98 working in consumers for Clang's default -std=

Changes:	http://site.icu-project.org/download/59
PR:		218788
Submitted by:	takefu@airport.fm, dcarmich@dcarmichael.net (early version)
Exp-run by:	antoine

Cleanup after removal of libexecinfo from ports.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

Remove USES=execinfo.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

- Properly clean up all empty doc dirs

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

- Update WWW

The DOCS option must not install doxygen.

Sponsored by:	Absolight

devel/icu: update to 58.1

Changes:	http://site.icu-project.org/download/58
PR:		214384
Exp-run by:	antoine
Approved by:	office (bapt)

- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
  --disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
  aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU.  The code wanted to use BYTE_ORDER
  defined in machine/endian.h, but this isn't visible because ICU is
  compiled with _XOPEN_SOURCE.  Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
  without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
  pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
  a C++11 runtime library now.  Add this to all ports that depend on it
  so their executables load the right libstdc++.so on FreeBSD 9.

PR:		205120
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)

Bump PORTREVISION for the icu revert.

This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.

PR:		205120
With hat:	portmgr
Sponsored by:	Absolight

devel/icu: bump PORTREVISION on dependent ports

Convert a couple ports that use both _CMAKE_ON and _CMAKE_OFF to _CMAKE_BOOL.

Use options helpers all the way in math/carve, because I couldn't help myself.

Convert USE_PHP*=yes into USES=php*

PR:		210529
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D6936

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

Remove BROKEN for FreeBSD 8, which is no longer supported.

Drop USES=iconv.

The port's build system only looks for iconv on Windows, and in any case the
code itself never uses it.

- Mark BROKEN on 8.x: does not build due to lack of strtoull

Update icu to 55.1

textproc/zorba: Modernize options, support DragonFly

  * Corrected an old-style LIB_DEPENDS callout
  * Used OPTION_SUB (and adjusted pkg-plist as a consequence)
  * Brought CMAKE args into options
  * Used sed to allow building on DragonFly
  * Fix swig build on F10+
  * Fix no-docs option

- Reset maintainership of my ports

- Convert textproc/ to USES=python

With hat:	python@

Cleanup plist

- Fix build on 9.x and above. 8.x needs some more investigation.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Fix one error on 8 and 9. Still fails to build on those platforms.

- USES=execinfo

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories T-V.

CR:		D509
Approved by:	portmgr (antoine)

- Respect LOCALBASE

- STAGE-clean
- Fix build

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Chase boost and icu bump
While here convert some LIB_DEPENDS

- rename AL2 to APACHE20 in Mk/bsd.licenses.db.mk
- svn move Templates/Licenses/AL2 Templates/Licenses/APACHE20
- add APACHE10 and APACHE11 to Mk/bsd.licenses.db.mk
- add entry in UPDATING
- bulk change all ports AL2 => APACHE20

- math/openfst/pkg-plist: remove share/licenses/openfst-1.3.4

PR:		ports/184785
Submitted by:	ohauer
Reviewed by:	tabthorpe
Approved by:	portmgr (tabthorpe@)

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

Adjust pkg-plist

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

- Add DOCS to OPTIONS_DEFINE

Reported by:	tijl
Feature safe:	yes

- Fix DOCSDIR
- Use OPTIONS for DOCS

Approved by:	portmgr

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

Chase icu, graphite2 and libexttextcat bump

- Make sure we don't pick up the wrong xerces-c library version

Feature safe:	yes

- Update to 2.7.0
  Release notes: http://www.zorba-xquery.com/html/entry/2012/09/26/Gaia

Feature safe:	yes

- Update to 2.6.0
  ChangeLog: https://launchpadlibrarian.net/112669217/ChangeLog
- Trim Makefile header

- update png to 1.5.10

- Unbreak when PORTREVISION != ""

Reported by:    pointyhat

- The proper acronym for Apache Software License 2 is really AL2
- Thanks to crees@ for generating the initial patch

PR:             ports/163521
Submitted by:   Pedro Giffuni <pfg apache.org>
Hat:            portmgr
Exp run by:     pav

- Update to 2.0.2

  Changelog since 1.4.0

        version 2.0.2

        * Fixed bug #3401971 (node-by-reference on dynamic collections)
        * documentation improvements
        * installer improvements
        * Fixed bug #3403291 (build for Fedora 15)
        * Don't install the .so for test modules
        * Fix for running ctest on Windows

        version 2.0.1

- New port: textproc/zorba

  Zorba is a general purpose XQuery processor implementing in C++ the W3C
  family of specifications. The query processor has been designed to be
  embeddable in a variety of environments such as other programming languages
  extended with XML processing capabilities, browsers, database servers, XML
  message dispatchers, or smartphones. Zorba can be accessed through APIs from
  C, C++, Ruby, Python, Java, and PHP. Zorba runs on most platforms and is
  available under the Apache license v2.

  WWW: http://www.zorba-xquery.com