The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Category W.

CR:		D510
Approved by:	portmgr (bapt)

Support stage
Use USES=libtool

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

- Don't remove directories not created by this port

Reported by:	pkg (DEVELOPER_MODE)

Approved by:	kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: www)

Approved by:	portmgr

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

- update png to 1.5.10

Bump pcre library dependency due to 8.30 update

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase libnotify, libproxy and webkit-gtk2 shlib changes, and fix build where
needed.

- Get Rid MD5 support

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Update to 2.30.1.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

- Remove obsolete gecko providers
- Remove obsolete inclusion of www/mozilla/bsd.gecko.mk

Approved by:    portmgr (miwi)
Exp-run by:     miwi

Set the default Gecko provider to be libxul to fix the build of GNOME on
pointyhat.

Approved by:    portmgr (implicit, erwin)
Feature safe:   yes
X-Feature-safe: well, not really, but required now that Firefox is FORBIDDEN

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 2.26.1.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Update to 2.24.3.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.22.2.

- Remove www/firefox15 support

Reviewed by:    mezz

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 2.22.1

Remove seamonkey support

Reported by:    Volodymyr Kostyrko <arcade@cairn.ints.net> via marcus

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Update to 2.20.3.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Fix the plist after the addition of the RSS extension.

Reported by:    pointyhat via pav

Add support for the RSS extension.

PR:             113786

-Update to 2.18.3.
-The 'epiphany-extensions' is a real name, so remove the PKGNAMESUFFIX.

Update to 2.18.2.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Sync USE_GECKO with www/epiphany to add xulrunner support.

Requested by:   Caelian on #freebsd-gnome

Update to 2.18.1.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Remove devel/pcre-utf8 and enable UTF8 support in devel/pcre by
default.

Bump PORTREVISION on all dependent ports.

- In USE_GECKO line, remove firefox-devel and add firefox15

Suggested by:   GeJ on EFnet

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

- Add firefox-devel support

Update to 2.4.1.1.

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Bump PORTREVISION to chase the firefox update.

Convert to USE_GECKO.

Obtained from:  MarcusCom CVS

Update to 1.8.2.

- Add SHA256 checksums

Update to 1.8.1.

Update to 1.6.6.

Update to 1.6.5.

Update to 1.6.4.

- Update WWW: line

Update to 1.6.3.

Bump PORTREVISIONs to chase the Mozilla update.

Update to 1.6.2.
Sort the pkg-plist.

- Update to 1.6.1

Bump PORTREVISION for all ports that depend on Mozilla.

Approved by:    portmgr (implicit)

Fix the build with mozilla-devel.

Reported by:    Jukka A. Ukkonen <jau@iki.fi>

Add support for building with Firefox.

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

Update to 1.4.5.

Use GCC 3.4 when building with mozilla-devel on 4.X.

Update to 1.4.4.

Update to 1.4.3.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Bump PORTREVISIONs to chase Mozilla update.

Update to 1.0.

Use the correct version of libtool 13 -> 15 to avoid install the *.la files.

Submitted by:   Tom McLaughlin <tmclaugh@sdf.lonestar.org>

Fix build with mozilla-devel.
All the work for this was done by marcus.

Kluge to build against mozilla-1.8a1. There's probably a
better way to do this...

Chase the Mozilla 1.7 update.

Update to 0.9.1.

Fix build on 4.X by fixing a C99-ism.

Reported by:    J. W. Ballantine <jwb@homer.att.com>

Fix build with OpenSP on 4.X.

Reported by:    J. W. Ballantine <jwb@homer.att.com>

Update to 0.8.2.

Add epiphany-extensions, a set of add-ons for the Epiphany webbrowser.  They
include popup blockers, mouse gestures, HTML validators, and more.