Correct a stupid typo.

Reported by:    QAT

Fix the plist when building with Gecko 1.8.

Update to 2.26.3.

Remove epiphany-webkit.

It currently doesn't build. And the next major version
of epiphany only supports webkit. We don't need a slave port for it.

Short-circuit the Gecko compile test to prevent the file system from
being touched when libxul is used as a Gecko provider.

Reported by:    bsam

Update to 2.26.2.

Fix make describe for epiphany-webkit.

Allow plugins to work when ephy is built against libxul.

Reported by:    Eric L. Chen <d9364104@mail.nchu.edu.tw>
Submitted by:   miwi (based on)

Update to 2.26.1.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Correct the Epiphany engine name.

Update to 2.24.3.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Add a new framework for browser plugins, USE_WEBPLUGINS. It is for which foo
plugins support one of web browsers and can take care of plist (depend on how
you use it) at the same time. I have written a complete document and even show
how it works in the www/firefox/Makefile.webplugins so be sure to read in
there. If there is anything that isn't clear in the document, please feel free
to ask and I will try my best to improvement it.

FYI: GNOME 2.24 depends on this, so it's coming.

BTW: It's based on www/linux-mplayer-plugin/Makefile.npapi with heavy modified.

Approved by:    portmgr

Update to 2.22.3.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.22.2.

- Remove www/firefox15 support

Reviewed by:    mezz

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 2.22.1.1

Update to 2.22.1

Remove seamonkey support

Reported by:    Volodymyr Kostyrko <arcade@cairn.ints.net> via marcus

Fix plist in epiphany-webkit

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Update to 2.20.3.

Update to 2.20.2.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

-Update to 2.18.3.
-Get rid of X11BASE.
-Use MANPREFIX before style police notice it. ;-)

Update to 2.18.2.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.18.1.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Update to 2.16.3.

- In USE_GECKO line, remove firefox-devel and add firefox15

Suggested by:   GeJ on EFnet

Update to 2.16.2.

Retire mozilla support since it doesn't work anymore

Reported by:    Raymond Lohuis <rlohuis@eddinglega.nl>

Don't try to close shared D-BUS connections.  This fixes an abort crash on
exit with newer versions of D-BUS.

Obtained from:  GNOME CVS

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

Add locale stuff in plist that aren't in mtree/BSD.x11-4.dist.

PR:             ports/101486
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>

Update to 2.14.3.

- Add firefox-devel support

Update to 2.14.2.1.

Update to 2.14.2.

Update to 2.4.1.1.

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 1.8.5.

Update to 1.8.4.1.

Mark IGNORE on 4.X.

Reported by:    pointyhat via kris

Correct the plug-in regular expression for Ephy 1.8.

Correct a typo.

Convert to USE_GECKO.

Obtained from:  MarcusCom CVS

Update to 1.8.3.

Update to 1.8.3.

- Add SHA256 checksums

Correct a copy&paste problem.

Reported by:    FreshPorts check

Do not detect libexecinfo.

PR:             88674

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

Update to 1.6.5.

Update to 1.6.4.

- Force rebuild with new mozilla/firefox

Update to 1.6.3.

Bump PORTREVISIONs to chase the Mozilla update.

Update to 1.6.2.

- Update to 1.6.1

Bump PORTREVISION for all ports that depend on Mozilla.

Approved by:    portmgr (implicit)

Fully-qualify the path to update-desktop-database and update-mime-database in
the plist since /usr/local/bin isn't in pkg_add's PATH. Bump the PORTREVISION.

Fix the build with mozilla-devel.

Reported by:    Jukka A. Ukkonen <jau@iki.fi>

Add support for building with Firefox.

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

Update to 1.4.8.

Add manual to update the mimetype database, it seems like GNOME developers
have removed the auto-update mimetype database for some reason. Maybe, they
have forgotten about it or else...

Reviewed by:    marcus

Shutting down gconfd is no longer needed before installation and is
actually a bad thing to do.

Use GCC 3.4 if we're building on 4.x against mozilla-devel.

Reminded by:    marcus

Update to 1.4.7.

Fix build with and track update of Mozilla 1.7.5.

Correct the pkg-plist.

Reported by:    pointyhat

Update WWW: line

Update to 1.4.6.

Use new INSTALLS_OMF.

Approved by:    bland, kwm, marcus and pav

Update to 1.4.5.

Bump 29 ports that use GCONF_SCHEMAS. Somehow, the diff of GNOME 2.8.x has
lost the small part. The small part was GCONF_SCHEMAS in bsd.gnome.mk that is
taking care of gconf key and schemas files for pkg-plist. Pav has committed by
re-add GCONF_SCHEMAS back in bsd.gnome.mk this afternoon. Therefore, must bump
PORTREVISION to correct our pkg-plist database installed.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Update to 1.2.8.

Bump PORTREVISIONs to chase Mozilla update.

Update to 1.2.7.

Remove lthack, set LIBTOOL_VER to 15, adjust the plist,
and bump the PORTREVISION.

Fix build with mozilla-devel. All the work for this fix
was done by marcus.

Kluge the source to build against mozilla-1.8a1.

This just conditionalizes out the offending code, so
somebody who has a better idea of what's going on
might want to take a closer look at this.

Chase Mozilla 1.7, and use the new GConf schema policy.

Follow mozilla-xpcom-devel.pc.

Update to 1.2.6.

Update to 1.2.5.

Update to 1.2.4.

When the Nautilus view is not enabled, the NautilusView server file is
no longer installed.

Reported by:    olgeni

Update to 1.2.3.

Presenting GNOME 2.6.0.  The FreeBSD GNOME Team feels this our best release
ever.  It fixes many bugs, and adds some features missing in previous
FreeBSD ports.  To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:

http://www.freebsd.org/gnome/docs/faq26.html

Please read it carefully.  GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:

http://www.marcuscom.com/tinderbox/

The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts.  We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.

Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>

Update to 1.0.8.

- Add SIZE to GNOME ports

Submitted by:   trevor