Kannel is a compact and very powerful open source WAP and SMS gateway, used
widely across the globe both for serving trillions of short messages (SMS),
WAP Push service indications and mobile internet connectivity.
===> The following configuration options are available for kannel-1.4.4_15,1:
MYSQL=off: MySQL database support
PGSQL=off: PostgreSQL database support
SQLITE3=on: SQLite 3 database support
===> Use 'make config' to modify these settings
www/kannel: Fix build with GCC 14
GCC 14 has transformed some warnings into errors: revert them to simple
warnings.
PR: 281249
Reported by: exp-run (antoine)
*/*: Refactor with IGNORE_WITH_MYSQL
- There are multiple ports which has MYSQL options and are non-DEFAULT.
Most of the time committers actually forget to check with the OPTION
enabled and in some cases they are BROKEN with newr versions of mysql.
So test with different versions of mysql and mark IGNOPRE_WITH_MYSQL
appropriately. Due to the EOL of 5.7 this has not been checked.
- Unbreak sysutils/cfengine* with MySQL 8.0 and later
- The primary purpose of running this check is having statistics of the
MySQL usability over MariaDB to explore the future possibility of
shifting to MariaDB as the default as major ports upstream have moved
their codebase to support MariaDB over MySQL.
- The following actions will also be taken after the sunset of MySQL 5.7
If a port is broken on all instances of MySQL/MariaDB:
- If a port has the option of multiple DB backends and MySQL is the
default then the DEFAULT will be changed to PGSQL/SQLITE before
2024Q1. And the OPTION will be removed before 2024Q2. If a
MAINTAINER is aware about such cases and want to prefer PGSQL over
SQLITE or vice versa please do so at your own accord. Otherwise
PGSQL will be preferred over SQLITE.
- If a port has the option of multiple DB backends and MySQL is not
the default then the the OPTION will be removed before 2024Q1.
Approved by: portmgr (blanket)
www/kannel: Change OPTIONS_DEFAULT to SQLITE3
- As MySQL57 is reaching EOL on 2023-12-31 and this port do not support
MySQL80 so switch to other possible DEFAULT
- Pet portclippy
- Unmark DEPRECATION
www/kannel: Fix MYSQL_VARS
During my previous commit I mistakenly inserted a TAB which is not the
correct way of doing this.
PR: 269203
Reported by: exp-run
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org>
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Mark these ports as buildable on armv6 after a trybroken run. (Also
tested with trybroken on armv7.)
The 'runaway process' ones are most likely just statistical.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark some ports failing on armv6, for errors classified as "configure_error".
Note: this skips all the ports that _sometimes_ fail with CMake errors. We
need to investigate that problem, and find out if it is specific to the qemu
environment.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.
While there replace USE_SQLITE=x by USES=sqlite:x.
PR: 208971
Submitted by: mat
Exp-run by: antoine
With hat: portmgr
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D5951
Bump more ports that depend on libsqlite3.so:
- ports that set USE_SQLITE with the *_USE option helper
- ports that depend on libsqlite3 indirectly as reported by pkg rquery
Approved by: portmgr (implicit)
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
- Stagify, modernize LIB_DEPENDS, use options helpers, touch COMMENT
- Drop the check for unsupported alpha architecture, sort the knobs
- Reformat and fix grammar in port description while I'm here
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
