Port details |
- p5-CatalystX-Profile Profile your Catalyst application with Devel::NYTProf
- 0.02 www
=2 0.02Version of this port present on the latest quarterly branch. - Maintainer: perl@FreeBSD.org
 - Port Added: 2011-05-08 23:54:05
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: perl5
- License: ART10 GPLv1+
- WWW:
- https://metacpan.org/release/CatalystX-Profile
- Description:
- Adds support for profiling your Catalyst application, without profiling setup.
¦ ¦ ¦ ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-CatalystX-Profile>0:www/p5-CatalystX-Profile
- To install the port:
- cd /usr/ports/www/p5-CatalystX-Profile/ && make install clean
- To add the package, run one of these commands:
- pkg install www/p5-CatalystX-Profile
- pkg install p5-CatalystX-Profile
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-CatalystX-Profile
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1488262692
SHA256 (CatalystX-Profile-0.02.tar.gz) = 151a352333a6d26626d9001bb7e3b3a11cd4251a191111da60a9657eb66acd6c
SIZE (CatalystX-Profile-0.02.tar.gz) = 9303
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- p5-Catalyst-Runtime>=5.80020 : www/p5-Catalyst-Runtime
- p5-CatalystX-InjectComponent>=0.024 : www/p5-CatalystX-InjectComponent
- p5-Devel-NYTProf>=3.01 : devel/p5-Devel-NYTProf
- p5-Moose>=0.93 : devel/p5-Moose
- p5-Sub-Identify>=0.04 : devel/p5-Sub-Identify
- p5-namespace-autoclean>=0.09 : devel/p5-namespace-autoclean
- perl5>=5.32.r0<5.33 : lang/perl5.32
- perl5>=5.32.r0<5.33 : lang/perl5.32
- Runtime dependencies:
-
- p5-Catalyst-Runtime>=5.80020 : www/p5-Catalyst-Runtime
- p5-CatalystX-InjectComponent>=0.024 : www/p5-CatalystX-InjectComponent
- p5-Devel-NYTProf>=3.01 : devel/p5-Devel-NYTProf
- p5-Moose>=0.93 : devel/p5-Moose
- p5-Sub-Identify>=0.04 : devel/p5-Sub-Identify
- p5-namespace-autoclean>=0.09 : devel/p5-namespace-autoclean
- perl5>=5.32.r0<5.33 : lang/perl5.32
- This port is required by:
- for Build
-
- www/p5-Task-Catalyst
- for Run
-
- www/p5-Task-Catalyst
Configuration Options:
- No options to configure
- Options name:
- www_p5-CatalystX-Profile
- USES:
- perl5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
07 Sep 2022 21:58:51
    |
Stefan Eßer (se)  |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.02 07 Sep 2022 21:10:59
    |
Stefan Eßer (se)  |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.02 20 Jul 2022 14:23:26
    |
Tobias C. Berner (tcberner)  |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
0.02 06 Apr 2021 14:31:07
    |
Mathieu Arnold (mat)  |
Remove # $FreeBSD$ from Makefiles. |
0.02 06 Oct 2018 13:06:45
  |
des  |
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw) |
0.02 27 May 2018 20:15:20
  |
sunpoet  |
Update WWW
search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.
With hat: perl |
0.02 15 Sep 2017 08:58:50
  |
mat  |
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight |
0.02 28 Feb 2017 09:48:16
  |
sunpoet  |
Update to 0.02
- Remove MASTER_SITE_SUBDIR
- Add LICENSE_FILE
- Fix *_DEPENDS
- Add NO_ARCH |
0.01_1 01 Apr 2016 14:33:58
  |
mat  |
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight |
0.01_1 13 Mar 2015 17:29:59
  |
adamw  |
Clean up the rest of the perl@ Makefiles a bit.
- Remove dependencies on modules distributed as part of perl core
- Remove references to FreeBSD < 8 and perl < 5.16
- Ensure that DOCS and EXAMPLES options exist for ports installing
PORTDOCS or PORTEXAMPLES
- Reduce unnecessary inclusions of bsd.port.options.mk by using
OPTIONS helpers and the like
- Fix some cases where dependencies were only assigned to BUILD_DEPENDS
- Fix a few of the cases where dependencies were only assigned to RUN_DEPENDS.
This one happens in many, many ports. I only applied it in cases where
it interfered with 'make test' but it should maybe be done more generally.
- Mute ${MKDIR} in installation
- Parethesize compound commands
- In www/p5-URI-Fetch, remove the ZLIB option that wasn't used |
0.01_1 26 Nov 2014 13:08:38
  |
mat  |
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above ) |
0.01 04 Nov 2013 09:57:55
  |
az  |
- support STAGEDIR
- add LICENSE |
0.01 20 Sep 2013 23:36:54
  |
bapt  |
Add NO_STAGE all over the place in preparation for the staging support (cat:
www) |
0.01 29 Aug 2013 04:08:54
  |
sunpoet  |
- Use single space after WWW: |
0.01 02 Aug 2013 18:52:11
  |
mat  |
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default. |
0.01 06 Jun 2013 13:28:19
  |
mat  |
PERL_MODBUILD implies PERL_CONFIGURE and PERL_CONFIGURE implies USE_PERL5.
Reported by: http://az.semmy.ru/perl_sdad.txt |
0.01 07 Feb 2012 13:29:00
 |
eadler  |
The variable is USE_PERL5 not USE_PERL
Submitted by: Alex Kozlov
Reviewed by: perl (swills)
Approved by: portmgr (pav) |
0.01 08 May 2011 23:53:52
 |
swills  |
Adds support for profiling your Catalyst application, without profiling setup.
WWW: http://search.cpan.org/dist/CatalystX-Profile/ |