Django MarkdownX is a comprehensive Markdown plugin built for Django, the
renowned high-level Python web framework, with flexibility, extensibility, and
ease-of-use at its core.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py312-django-markdownx listed in the above command, you can pick from the names under the Packages section.
*: Switch consumers over to Django 5.2
Django 4.2 reached its End-of-Life on 7th April 2026 and Django 5.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2028.
* Switch most ports that use www/py-django42 to www/py-django52.
* Where necessary, remove PORTSCOUT, which is no longer needed because
an update to a newer version that no longer supports Django 4.2 should
now be possible.
* Bump PORTREVISION due dependency change where necessary.
PR: 291707
Reviewed by: sunpoet (python)
Differential Revision: https://reviews.freebsd.org/D56966
*: Switch consumers over to Django 4.2
Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.
* Switch most ports that use www/py-django32 to www/py-django42.
* Ports that are not compatible with Django 3.2 have already been set
with an expiration date were not taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 276319
Reviewed by: dvl, grembo, ultima
Approved by: bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
ultima, maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D44637
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org>
(Only the first 15 lines of the commit message are shown above )
www/py-django32: Switch consumers over to Django 3.2
Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.
* Switch the most ports that use www/py-django22 to www/py-django32
* Switch www/seahub over to www/py-djangorestframework
* Ports that are not yet ready for Django 3.2 (only three so far) or
those that have already been set with an expiration date were not
taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 261313
Reviewed by: bofh, dvl, koobs, ultima
Approved by: bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
Alexander Sieg (maintainers)
maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D34859
*/*: Cleanup after the removal of lang/python36
* Remove codes that aren't necessary after the removal of lang/python36
* Mark ports that aren't necessary with Python 3.7 or later as
DEPRECATED and set EXPIRATION_DATE.
PR: 261046
Approved by: lwhsu (python)
Mk: switch PYTHON_REL to 5 digits to support python 3.10.x
PR: 255013
Differential Revision: https://reviews.freebsd.org/D29418
Exp-run by: antoine
Approved by: wen@, no objection from python@ or portmgr@
www/py-django-markdownx: Update to 3.0.1
* Also assign the port to Django 2.2 (current LTS release) as Django 1.11 is
End-of-Life.
* Enforce UTF-8 environments for Python <= 3.6 to avoid errors during the
configuration phase.
* Make USES block separate from non-related variables.
Changelog:
https://github.com/neutronX/django-markdownx/releases
PR: 245325
Approved by: maintainer timeout (14 days)
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version
(Only the first 15 lines of the commit message are shown above )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Django Markdownx is a Markdown editor built for Django. It enables raw editing,
live preview and image uploads (stored locally in MEDIA folder) with drag&drop
functionality and auto tag insertion. Also, django-markdownx supports multiple
editors on one page.
Template is highly customizable, so you can easily use i.e. Bootstrap to layout
editor pane and preview pane side by side (as in preview animation below).
WWW: https://github.com/adi-/django-markdownx
Submitted by: cs@
