PyQt: Update to latest versions
PyQt5:
- devel/py-qt5-pyqt: Update to 5.15.11
- graphics/py-qt5-3d: Add port
- net/py-qt5-networkauth: Update to 5.15.6
- www/py-qt5-webengine: Update to 5.15.7
- x11-toolkits/py-qt5-chart: Update to 5.15.7
- x11-toolkits/py-qt5-datavis3d: Add port
PyQt6:
- devel/py-qt6-pyqt: Update to 6.7.1
Build tools:
- devel/sip: Update to 6.8.6
- devel/py-qt5-sip: Update to 12.15.0
- devel/py-qt6-sip: Update to 13.8.0
- devel/py-qtbuilder: Update to 1.16.4
The build tools are now all licensed BSD2CLAUSE and have been converted
to PEP517.
*/*: Add ${PY_SETUPTOOLS} to BUILD_DEPENDS
Fix build when setuptools is removed from RUN_DEPENDS in
Mk/Uses/python.mk.
PR: 270510
Approved by: portmgr (blanket)
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above )
*/py-qt5-*: Remove Digia's mention in pkg-descr
There was Trolltech, Nokia, Qt Project, Digia and today The Qt Company.
To avoid replacing the name at each structure, we will simply mention
that:
"PyQt5 is a set of Python bindings for Qt5 application framework"
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Mark ports recursively depending on Python 2.7 for expiration on June 23.
For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.
Submitted by: rene
Reviewed by: portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D28665
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
PyQt: fix flavors
py-qt modules require sip-module to build, unfortunately, it is hardcoded and
links to the default python version.
There is no option to pass it in like sip binary, so we need to patch
configure.py file.
Reported by: fluffy
Approved by: fluffy
Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.
- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0
SIP is a collection of tools to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.
(Only the first 15 lines of the commit message are shown above )
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
Add USES=xorg USES=gl, ports categories w
Add USES=xorg and USES=gl to ports in categories starting with 'w'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Update PyQt5 to 5.12.1
- Upgrade sip to 4.19.15
- Upgrade qscintilla2 to 2.11.1
- Upgrade PyQt to 5.12.1
- From this version on www/py-qt5-webengine is unbundled and ships its own
distfile
PR: 236894
Exp-run by: antoine
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
pyqt: Change install directories for Python flavor support
* PyQt could not be installed for multiple Python versions at
the same time, as there were conflicting files.
This patch creates Python-version versioned directories for
all these, and further installs binaries with a version number.
* Note, there might be some hickups for software that depends on
on of the .so's provided by PyQt5, which might not be found
anymore autmotically, and maybe need some LD-flaggery.
* Update PyQt5 to 5.10.1
* Mark www/py-qt5-webengine broken. It is unforuntately no longer
compatible with the old qt5-webengine-5.9.4 we ship.
PR: 232745
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D8714
Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative
- There was no obvious reason to split these ports, and it makes
porting simpler; the set of ports using either mostly coincided.
Exp-run by: antoine
PR: 223687
PR: 232751
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
