devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyaml

- Bump PORTREVISION of dependent ports for dependency change

www/py-spyne: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

*: Switch consumers over to Django 4.2

Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.

* Switch most ports that use www/py-django32 to www/py-django42.

* Ports that are not compatible with Django 3.2 have already been set
  with an expiration date were not taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		276319
Reviewed by:	dvl, grembo, ultima
Approved by:	bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
		ultima, maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D44637

www/py-webtest: Move www/py-WebTest to www/py-webtest

- Use lowercase PORTNAME and path
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, fix py-zope.testbrowser

error in zope.testbrowser setup command: 'install_requires' must be a string or
list of strings containing valid project/version requirement specifiers;
Expected end or semicolon (after name and no valid version specifier)
    pytz > dev
         ^
*** Error code 1

Stop.
make: stopped in /usr/ports/devel/py-zope.testbrowser

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

www/py-WebTest: chase PORTNAME in consumers after d35a222edd93

===>   py39-pecan-1.3.3 depends on package: py39-WebTest>=1.3.1 - not found
===>   Installing existing package /packages/All/py39-webtest-3.0.0.pkg
Installing py39-webtest-3.0.0...
[...]
Extracting py39-webtest-3.0.0: .......... done
===>   py39-pecan-1.3.3 depends on package: py39-WebTest>=1.3.1 - not found
*** Error code 1

Reported by:	pkg-fallout

www/py-spyne: Update WWW and clean up pkg-descr

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

www/py-spyne: Convert to USE_PYTHON=pytest

www/py-spyne: Change TEST_DEPENDS from py-suds-jurko to py-suds

py-suds-jurko is

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

www/py-spyne: Update to 2.14.0

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

www/py-spyne: Change RUN_DEPENDS from py-sqlalchemy13 to py-sqlalchemy14

- Bump PORTREVISION for dependency change

Remove # $FreeBSD$ from Makefiles.

Update USES=python: math/py-pandas 1.2.0 requires Python 3.7+

PR:		250103

Update version requirement of RUN_DEPENDS

Update version requirement of TEST_DEPENDS

Drop python 2.7 support from a few ports

With hat:	portmgr

Convert to test framework

Update to 2.13.16

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

Update to 2.13.15

- Add LICENSE_FILE

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Update to 2.12.16

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

Update to 2.12.15

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Use USE_LOCALE instead of patch file

Use patch from upstream

Relax USES=python

- Specify UTF-8 encoding for the UTF-8 character in CHANGELOG.rst
- Bump PORTREVISION for package change

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

- Update to 2.12.14

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Allow concurrent installation (USE_PYTHON=concurrent)
- Bump PORTREVISION for package change

- Update to 2.12.11

Changes:	https://github.com/arskom/spyne/blob/master/CHANGELOG.rst

- Allow build with Python 3
- Add NO_ARCH
- Bump PORTREVISION for package change

- Add py-spyne 2.10.10

Spyne is a Python RPC toolkit that makes it easy to expose online services that
have a well-defined API using multiple protocols and transports.

It integrates with popular Python web frameworks as well as libraries like
SQLAlchemy to keep your code as DRY (Don't Repeat Yourself) as possible.

WWW: https://pypi.python.org/pypi/spyne
WWW: http://spyne.io/