Seafile: Update to 11.0.12

Changes: https://manual.seafile.com/changelog/server-changelog/

Seafile: Update to 11.0.9

Changes: https://manual.seafile.com/changelog/server-changelog

*: Switch consumers over to Django 4.2

Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.

* Switch most ports that use www/py-django32 to www/py-django42.

* Ports that are not compatible with Django 3.2 have already been set
  with an expiration date were not taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		276319
Reviewed by:	dvl, grembo, ultima
Approved by:	bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
		ultima, maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D44637

devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil

- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of
PKGNAMEPREFIX for *_DEPENDS

seafile: Update to 11.0.5

Changes: https://manual.seafile.com/changelog/server-changelog/

seafile: Update to 11.0.3

changelog: https://manual.seafile.com/changelog/server-changelog/

Seafile: Update to 11.0.2

Changes: https://manual.seafile.com/changelog/server-changelog/

www/seahub: Patch for new version of Pillow

PR: 272942
Reported by: Scott Kitchin (scott@kitchin.com), Boris Tassou
(boris.tassou@securmail.fr)
Submitted by: sunpoet
Obtained from: Seafile

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

seafile: Update to 9.0.10

Changes: https://manual.seafile.com/changelog/server-changelog/#9010-2022-12-07

Seafile: Update to 9.0.9

Changes: https://manual.seafile.com/changelog/server-changelog/

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

Seafile: Update to 9.0.7

Changes: https://manual.seafile.com/changelog/server-changelog/

*: Update seafile to 9.0.6

Changes: https://manual.seafile.com/changelog/server-changelog/

www/seahub: Add missing depend

Cryptodome dependency was missing which is required
to create links with passwords.

seafile: Updated to 9.0.5

Changes: https://manual.seafile.com/changelog/server-changelog/

Seafile: Updated to 9.0.4

Changes: https://manual.seafile.com/changelog/server-changelog/

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

www/seahub: Add missing depend

Added missing depend that was removed from upstream dependancy.

Seahub and Django depends: Update Django to 3.2

This is the initial commit for the migration from Django
2.2 to Django 3.2. This migration is needed due to Django 2.2
becoming is EOL as of 4/1/2022.

PR: 261313
Approved by: kai
Differential Revision: https://reviews.freebsd.org/D34456

textproc/py-xmlschema: Update to 1.10.0

Changelog:	https://github.com/sissaschool/xmlschema/blob/v1.10.0/CHANGELOG.rst

Update consumers to use Python >= 3.7 (avoid break bulk -a).

Seafile|Seahub: Updated to 9.0.2

Changes: https://manual.seafile.com/changelog/server-changelog/

www/py-pyjwt: Rename to www/py-pyjwt1

To make it possible to easily import py-pyjwt v2.x move the current port
to a versioned directory. Bump consumers after rename of the dependency.

PR:		254038

*: Updated to 8.0.7

Changes: https://manual.seafile.com/changelog/server-changelog/

*: Updated to 8.0.6

Changes: https://manual.seafile.com/changelog/server-changelog/

*: Updated to 8.0.5

Changes: https://manual.seafile.com/changelog/server-changelog/

www/seahub: Remove unneeded dependency

*: Updated to 8.0.4

Changes: https://manual.seafile.com/changelog/server-changelog/

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update ports to Django22

django-post_office jsonfield depend has been renamed
upstream, the old django-jsonfield port does not support
django past 1.11.

PR:		245309
Approved by:	sunpoet, kai, jhixson (timeout)
Differential Revision:	https://reviews.freebsd.org/D28513

Update re-tagged version

Updated Seafile/Seahub to 8.0.3

Changed to -server branch, some errors were creeping over
from the pro version not being compatible with the community
edition. Previously this was never an issue as you must manually
upgrade to the pro version for the new features.

Disabled seafile-controller config checking prior to startup.
The check only ran on ccnet previously and this was changed to
seafile which never implemented the function.
https://forum.seafile.com/t/seafile-controller-t-functionality-broken-on-8-x/13738

This version adds compatible with Django 2.2, this will require
coordination with multiple port devs to migrate this over
properly.

Changes: https://manual.seafile.com/changelog/server-changelog/

PR:		252715

Updated SeaHub to 7.1.9

Updated seafile to 7.1.5 and seahub to 7.1.8

Changes:
https://download.seafile.com/published/seafile-manual/changelog/server-changelog.md
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Updated Seahub to 7.1.7

Changelog:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Updated to 7.1.6

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Updated seafile to 7.1.4 and seahub to 7.1.5

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

www/py-djangorestframework: Update to 3.11.0

* Switch the port to Django 2.2 (current LTS release) as well because
  Django 1.11 is End-of-Life since April.  Do the same for www/py-drf-yasg.

* Repo-copy www/py-djangorestframework to www/py-djangorestframework311
  which will be used as a transitional package by www/seahub until it gets
  support for Django 2.2+ in the next weeks/months.

* Drop the Python 2.7 support of the remaining consumers to avoid breakage
  of "bulk -a".

* Mark both repo-copied ports www/py-dj22-{djangorestframework,drf-yasg} as
  deprecated because they're obsolete now.

PR:		245309
Reviewed by:	sunpoet (earlier revision), ultima
Differential Revision:	https://reviews.freebsd.org/D24850

Updated to 7.1.4

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

* Updated to 7.1.3

This minor version update no longer supports python 2.7.
The way mysql support is detected upstream has changed. Instead of patching
the configure.ac script, I used a couple hacks for this to be detected for
custom configurations. Didn't detect any issues with this method but I'm
open to change this in the future.

Added a SeaHub upgrade message to smooth out upgrading. For upgrading from
7.0.x,
if one does not clear the cache, http 500 will be returned.

The seafile_datadir no longer points to the seahub.ini, this has been changed
upstream and may cause upgrading issues if not using the default. This can
easily be changed by setting it in rc.conf.

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

Deprecate some ports using deprecated version of python

With hat:	portmgr

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version

Clean up USES

With hat:	portmgr

Updated to 7.0.11

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

* Update to 7.0.10

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Updated to to 7.0.9

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

Updated to 7.0.8
Fixed runtime dependencies for seafdav
and remove depends not required for
seahub.

Convert to UCL & cleanup pkg-message (categories w)

Updated seafile to version 7.0.4 and seahub to 7.0.7

Changes: https://manual.seafile.com/changelog/server-changelog.html
https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update seafile to 7.0.3 and seahub to 7.0.6

Changes:	https://manual.seafile.com/changelog/server-changelog.html

Updated Seafile to 7.0.2
Updated Seahub to 7.0.3

Changes: https://manual.seafile.com/changelog/server-changelog.html

Updated seafile to 7.0.1
Updated seahub to 7.0.2

Changes: https://manual.seafile.com/changelog/server-changelog.html
https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

Change currently unused init var seahub_host so
there is no breakage for current users of seahub.

Change hard coded 0.0.0.0 for gunicorn start to
seahub_host.

PR:		237366
Submitted by:	Boris Tassou <boris.tassou@sec^>

Bumped seahub version for init script to fix gunicorn binary name
Fix checksum due to retagged version

PR:		237367

* Updated to 6.3.13
* Added patch to SeaHub to revert regression

The regression breaks the search_user function.
More details about regression can be found at:
https://github.com/haiwen/seahub/issues/3001

PR:		236047
Reported by:	Martin Waschbusch <martin@wasch^>

* Updated to 6.3.11

Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

* Updated to 6.3.10

Affected ports: www/py-seafdav www/py-seafobj www/seahub

* Updated seahub to 6.3.9

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

* Updated Seahub to 6.3.7

* Updated to 6.3.6

* Fixed release version commit change

* Updated Seafile to 6.3.4, Updated Seahub to 6.3.5.
* Removed flup6, this was required with fastcgi which
Seahub no longer supports
* Added django-webpack-loader and requests_oauthlib,
these were missing depends added in 6.3.x which can
errors if missing when Seahub starts.
* Removed PYTHONPATH for python2.6 and added additional
directories for Seahub "thirdpart". This can also prevent
seahub from starting.

Changes: https://manual.seafile.com/changelog/server-changelog.html

Removed fastcgi, this is no longer supported in seafile 6.3+
and previous installs 6.3+ prior to this revision are broken
when using the seahub_fastcgi option.

Update Seafile family to 6.3.1

As of Seafile 6.3.0, django has been upgraded
to 1.11. Seafile's dependencies have also been
switched to match this change.

Reviewed by:	miwi
Differential Revision:	https://reviews.freebsd.org/D15718

* Updated Seahub to 6.2.12

Affected ports: www/py-seafdav www/py-seafobj www/seahub
Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

* Updated to 6.1.11

Affected ports: www/py-seafdav www/py-seafobj www/seahub
Changes:
https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

New port: www/py-djangorestframework as version 3.8.x

- py-djangorestframework 3.6.x lives on as py-djangorestframework36
- seahub and django-annotations stay on -36

PR:		227319
Submitted by:	Kai <freebsd_ports@k-worx.org>
Reviewed by:	antoine, sunpoet

Move net-mgmt/seafile-server's message to seahub and
change it to clarify that Seahub is required for the
full application. This will prevent users from being
confused when installing net-mgmt/seafile-server.

PR:		227337

Add compilation of i18n for multi-language support
during build phase. This will allow one to change
the language when using seahub.

Reported by:	martin@wasch^

* Bump port revision for depend change (r465393)

Pointy hat:	me!

* Readd py-flup6 ad a depend

Running seahub in fastcgi mode requires flup6.

Pointy hat:	lwhsu

* Updated to 6.2.10

Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html
Affected Ports:	www/py-seafdav www/py-seafobj www/seahub

Simplify Makefile: use PY_FUTURES

With hat:	python

* Update Seahub to 6.2.9

Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html
Affected Ports:	www/py-seafdav www/py-seafobj www/seahub

* Updated Seafile to 6.2.5, Seahub to 6.2.8

Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

* Updated to 6.2.7

Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html
Affected ports:	www/py-seafdav www/py-seafobj www/seahub

* Update Seafile to 6.2.4
* Update Seahub to 6.2.5
* Reverted recent patches to work better with libevhtp

Affected ports: net-mgmt/ccnet-server net-mgmt/seafile-server www/py-seafdav
www/py-seafobj www/seahub

- These ports do not need flup anymore

PR:		224332
Submitted by:	Shane <FreeBSD@ShaneWare.Biz>

* Updated to 6.2.4

Affected ports:	www/py-seafdav www/py-seafobj www/seahub
Changes:	https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

* Updated to 6.2.2

Affected ports: www/py-seafdav www/py-seafobj www/seahub

* Updated to 6.2.1

Affected ports: www/seahub www/py-seafdav www/py-seafobj

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

* Updated Seafile to 6.2.2, Seahub to 6.2.0
* Fixed gunicorn startup issue

Affected ports: net-mgmt/seafile-server net-mgmt/ccnet-server www/py-seafdav
www/py-seafobj www/seahub
Changes:	https://manual.seafile.com/changelog/server-changelog.html

* Updated to 6.1.9

Affected ports: www/py-seafdav www/py-seafobj www/seahub

* Updated to 6.1.8

Affected ports: www/py-seafdav www/py-seafobj www/seahub

Approved by:	lifanov (mentor, implicit)

* Updated to 6.1.7
* Cleaned up Makefiles

Affected ports: www/seahub www/py-seafdav www/py-seafobj

Approved by:	lifanov (mentor, implicit)

* Updated to 6.1.6

Affected ports: www/py-seafdav www/py-seafobj www/seahub

Reviewed by:	matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D11689

* Updated to 6.1.5

Affected ports: www/py-seafdav www/py-seafobj www/seahub

Reviewed by:	lifanov (mentor)
Approved by:	lifanov (mentor)
Differential Revision:	https://reviews.freebsd.org/D11643

* Updated to 6.1.4

Reviewed by:	lifanov (mentor)
Approved by:	lifanov (mentor)
Differential Revision:	https://reviews.freebsd.org/D11591

* Updated to 6.1.3

Reviewed by:	lifanov (mentor)
Approved by:	lifanov (mentor)
Differential Revision:	https://reviews.freebsd.org/D11493

* Updated maintainer email
* Changed comment headers to match my name and FreeBSD email

Reviewed by:	matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D11466

* Updated to 6.1.2

Affected ports: www/seahub www/py-seafdav www/py-seafobj

Reviewed by:	lifanov (mentor)
Approved by:	lifanov (mentor)
Differential Revision:	https://reviews.freebsd.org/D11455

* Added py-requests to runtime depends

Reported by:	Carsten Lohrmann
Reviewed by:	lifanov (mentor), matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D11430

* Updated to 6.1.1

Changelog: https://manual.seafile.com/changelog/server-changelog.html

Affected ports: net-mgmt/seafile-server net-mgmt/ccnet-server
www/py-seafdav www/py-seafobj www/seahub

Reviewed by:	lifanov (mentor), matthew (mentor)
Approved by:	lifanov (mentor), matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D11333

update seafile to 6.0.10 and seahub to 6.0.13

This is an update to seafile to the most current version, 6.0.10. This update
moves duplicate code to Makefile.include and also added a variable seahub_ver
which is set to 6.0.13. The pkglist was also regenerated for most or all
packages.

* Updated seafile_ver to 6.0.10
* Added seahub_ver and set to 6.0.13
* Moved duplicate code to Makefile.include
* Regenerated pkg-lists

 - [fix] Fix a bug in listing libraries in admin panel
 - Improve performance when checking group shared library permission
 - [fix] Fix image popup in favourite page
 - [fix] Fix generating sharing link with expiring time in file detailed view
page
 - [fix] Don't allow to create library with '/' in name
 - [fix] Fix two-factor authentication