Apache Traffic Server is a high-performance web proxy
cache that improves network efficiency and performance
by caching frequently-accessed information at the edge
of the network.
===> The following configuration options are available for trafficserver-10.1.0:
GEOIP=off: Enable MaxMindDB-based GeoIP geolocation support
IMAGEMAGICK=off: Enable ats-magick & webp convert plugin
MIMALLOC=off: Use mimalloc
X11=off: X11 (graphics) support
===> Use 'make config' to modify these settings
lang/luajit: update to v2.1
Disconnect lang/luajit-devel from the build, will be removed soon.
Bump PORTREVISIONs for the consumers.
Discussed with: adamw
PR: 225342
*/*: llvm15 build fixes
llvm15 was also merged into 13.2-STABLE effective from OSVERSION
1302505. Fix the ports that failed to build with llvm15.
Approved by: portmgr (blanket)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org>
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
framework: Add new USES 'magick' for graphics/ImageMagick*
A new USES has been added to depend on ImageMagick.
USES=magick
adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.
If a specific version is required, use for example
USES=magick:6 resp. USES=magick:7
If only a build, run or test is required, use for example
USES=magick:build resp. USES=magick:6,build,test
(Only the first 15 lines of the commit message are shown above )
www/trafficserver: fix build on powerpc64
This port builds on amd64, but without luajit support since there's no luajit
for powerpc64.
Also add USES=localbase instead of LIBS+= and remove unused CONFIGURE_ARGS.
Since files are installed to powerpc-freebsd-thread-multi directory, set proper
PLIST_SUB and do-install target.
Don't add -L/usr/lib to LDFLAGS, it breaks when compiling with ports GCC.
PR: 243154
Approved by: gaod@hychen.org (maintainer)
MFH: 2020Q1 (fix build blanket)
USE_GCC=7 is the oldest version supported, so change that into the
preferred USE_GCC=yes.
This should not practically affect most systems and builds since, unless
GCC 7 is the only one installed, we'd go for the default version anyway.
Approved by: portmgr (blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.
Change summary:
- Always do verbose builds for cmake, ninja and GNU configure (the
latter includes check if --disable-silent-rules is actually supported
by the configure script; there are isolated cases when it's not true)
(Only the first 15 lines of the commit message are shown above )
Drop i386 from ONLY_FOR_ARCHS.
32-bit architectures don't seem to be supported, as `make configure' shows:
checking size of void*... 4
configure: error: You are trying to build on a 32-bit platform, which is
unsupported.
===> Script "configure" failed unexpectedly.
Add a CACHEURL option.
- not enabling it by default, it does not seem to build on 9
- convert to options helpers, and use OPTIONS_SINGLE instead of OPTIONS_RADIO.
PR: 203973
Submitted by: maintainer
Sponsored by: Absolight
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same
(Only the first 15 lines of the commit message are shown above )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above )
Changes the pidfile used by daemon when start traffic server,
the previous one conflicts with traffic_cop pidfile.
PR: ports/193553
Submitted by: realhuang21@gmail.com
Approved by: mentors (implicit)
The MAP_NORESERVE flag to mmap() has never been implemented in FreeBSD and
is being removed. No portrev bump needed since the kernel will continue to
accept this flag for old binaries even after support for it in new binaries
is removed.
PR: 193961
Approved by: portmgr (antoine)
- Update to 5.0.1 to fix CVE-2014-3525
- Patch Makefile.in instead of Makefile.am to avoid USE_AUTOTOOLS
- Add USES=cpe, USES=libtool and INSTALL_TARGET=install-strip
- Use /var instead of PREFIX/var
- Use @sample
- Switch devel/hwloc to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
- Add LICENSE_FILE
- While here, fix stagedir reference in www/trafficserver
Approved by: portmgr blanket
- Convert to USES=libtool
- Add USE_AUTOTOOLS=autoheader so the configure header is regenerated
- Add "AUTOMAKE_ARGS=-a -c -f" so build scripts are updated to match our
version of automake
- Remove "ACLOCAL_ARGS=-I build" because configure.ac contains
AC_CONFIG_MACRO_DIR([build]) so aclocal looks inside "build" automatically
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
- Update to 4.1.2
- Build with clang on FreeBSD 10 and remove USE_GCC=any
- added some configuration OPTIONS
- added patch to fix segfault with current tcl
- added patches to avoid crash on i386
- compile with libxml2, hwloc, boost
- add user tserv for owning configuration and log directory
- added stage support
- enabled compiling WCCP and SSD support
- use lua with JIT
- install perl TS module
PR: ports/185669
Submitted by: Radim Kolar <hsn@sendmail.cz>
Approved by: maintainer timeout (3 weeks)
- Update to 3.2.5 [1]
- Add pkgconfig dependency to fix configure on FreeBSD 9.x and 10.x [2]
- Add USE_GCC=any to fix configure and compile on FreeBSD 10.x
- Convert LIB_DEPENDS to new shlib format
- Remove checks for old EoL FreeBSD versions
- Support staging
PR: ports/179268 [1]
PR: ports/183174 [2]
Submitted by: Hung-Yi Chen <gaod@hychen.org> [1]
Reported by: Gunnar Flygt <gunnar.flygt@sr.se> [2]
Approved by: maintainer timeout (19 weeks) [1]
With hat: portmgr
- Update to 3.2.4
Please note that this version has many FreeBSD fixes and improvements,
but SRV DNS record support in this version is broken.
PR: ports/170829 (based on)
Submitted by: vfx9as <vfx9as@gmail.com>
Approved by: jnlin@csie.nctu.edu.tw (maintainer)
- The proper acronym for Apache Software License 2 is really AL2
- Thanks to crees@ for generating the initial patch
PR: ports/163521
Submitted by: Pedro Giffuni <pfg apache.org>
Hat: portmgr
Exp run by: pav
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
