x11-drivers/xf86-input-elographics: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

xorg: bump revision of drivers after xorg-server upgrade

The internal ABI has been bumped

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update xorg x11 servers to 1.20.7

Update xorg x11 servers to 1.20.7.  This updates x11-servers/xorg-server,
xephyr, xorg-dmx, xorg-nestserver, xorg-vbserver and xwayland.

Enable the UDEV backend by default, instead of the DEVD backend, for
autoconfiguration of input devices on FreeBSD 12 and later.
FreeBSD 11 lacks the needed support in base and will keep on using the DEVD
backend.
Support for the HAL backend is dropped completely, it has been deprecated
for a long time.
Update and improve the DEVD backend.
Add a pkg message about sysctl configuration that might be needed when using
UDEV.

Switch all ports to use USES=xorg-cat

Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports

x11-drivers/xf86-input-elographics: Update to 1.4.2

Update x11-drivers/xf86-input-elographics to 1.4.2.
Add LICENSE and LICENSE_FILES.
Local patches came from upstream, and are included in this release.  Delete
them.  This release is mostly a noop because of this.

Sponsored by:	B3 Init

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

Update X.org WWWs

Approved by:	portmgr blanket

Xorg-servers update to 1.18.4 with driver updates and revision bumps.

Update xf86-video-ati to 7.8.0
Update xf86-video-intel to 2.99.917.20170103
Update xf86-input-synaptics to 1.9.0
Update xf86-input-evdev to 2.10.5
Update xf86-video-r128 to 6.10.2
Update xf86-video-rendition to 4.2.6
New port: xf86-video-geode

PR:		214591,216269,214687,214593,214715,216276,216277,216278,216287,
		216288,216292,216298,214560,216299,216300,216301,216302
Approved by:	swills (mentor, portmgr)
Differential Revision:	https://reviews.freebsd.org/D9436

Import few patches from upstream to allow building with newer xorg

Note that those drivers are barely maintained and might disappear in the futur

PR:		216271
Submitted by:	matthew@reztek.cz

Xorg-server update to 1.17.2 with related driver updates and bumps.

Update fontproto to 2.1.3.
Update libXfont to 1.5.1.
Update xf86-input-keyboard 1.8.1.
Update xf86-input-vmmouse to 13.1.0.
Update xf86-input-void to 1.4.1.
Update xf86-video-chips to 1.2.6.
Update xf86-video-cirrus to 1.5.3.
Update xf86-video-mach64 to 6.9.5.
Update xf86-video-neomagic to 1.2.9.
Update xf86-video-r128 to 6.10.0.
Update xf86-video-s3virge to 1.10.7.
Update xf86-video-savage to 2.3.8.
Update xf86-video-siliconmotion to 1.7.8.

x11-servers/xorg-server: Update to 1.14

The X.Org server has been updated to 1.14. The changes it brings are described
in a post on the Graphics team blog:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/

The most noticable change is the DEVD input device autodetection backend
which is enabled by default, replacing the HAL backend. The keyboard
layout configuration must be migrated from HAL's .fdi files to X.Org
files. The procedure is explained in the post mentionned above.

Several ports were removed with this update, mainly because they are not
compatible with the X.Org server anymore:
    o  nvidia-driver-71
    o  nvidia-driver-96

Fix the PORTREVISION bump for the lang/gcc update that went badly for
ports (x11-drivers plus graphics/libGL plus x11-servers/xorg-server)
that handle PORTREVISION in a creative manner hardly lending itself
to any form of automated bumping.

PR:		192025
Reported by:	Scott Allendorf <scott-allendorf@uiowa.edu>

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-drivers)

Update to 1.4.1 for new xorg.

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

- Please welcome Xorg 7.5.2

       The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10.0

Notes: all x11@ ports fixed for FreeBSD 10

- Please welcome Xorg 7.5.1

The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

        Beat Gaetzi
        Dima Panov
        Koop Mast
        Eitan Adler
        and all Testers.

PR:             ports/147646
                ports/148035
                ports/148744
                ports/150223
                ports/152889
                ports/154457

- Mark BROKEN: does not compile

Reported by:    pointyhat

- Fix build on 6.X

Chase xorg-server update and bump driver PORTREVISIONS.

Chase xserver update with driver port bumps.

Chase the Xorg server update and bump ports that depend on it.

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.