x11-drivers/xf86-input-synaptics: Moved man to share/man

Approved by:    portmgr (blanket)

x11-drivers/xf86-input-synaptics: Always use EVDEV on FreeBSD

Remove the condition on $OSREL as all supported FreeBSD version should
default using evdev.

PR:	273537
Sponsored by:	Beckhoff Automation GmbH & Co. KG

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

xorg: bump revision of drivers after xorg-server upgrade

The internal ABI has been bumped

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

x11-drivers/xf86-input-synaptics: Enable EVDEV on 14

Enable the EVDEV option on FreeBSD 14.
Bump portrevision.

Noticed by:	jbeich

Bump portrevision for devel/evdev-proto

Bump portrevision on everything with a build dependency on
devel/evdev-proto, to chace the update of evdev-proto in r550442.

x11-drivers/xf86-input-synaptics: enable EVDEV by default on FreeBSD 12+

After switching default value of kern.evdev.rcpt_mask sysctl to 12 (r360126)
some users get their touchpads broken as they have xf86-input-synaptics port
installed. See e.g. PR/245948. This happens as xf86-input-synaptics has
greater priority than libinput and effectively disables latter after
installation. Workaround this issue with enabling EVDEV support in the port.

PR:		245966
Approved by:	x11 (zeising)

Update xorg x11 servers to 1.20.7

Update xorg x11 servers to 1.20.7.  This updates x11-servers/xorg-server,
xephyr, xorg-dmx, xorg-nestserver, xorg-vbserver and xwayland.

Enable the UDEV backend by default, instead of the DEVD backend, for
autoconfiguration of input devices on FreeBSD 12 and later.
FreeBSD 11 lacks the needed support in base and will keep on using the DEVD
backend.
Support for the HAL backend is dropped completely, it has been deprecated
for a long time.
Update and improve the DEVD backend.
Add a pkg message about sysctl configuration that might be needed when using
UDEV.

Switch all ports to use USES=xorg-cat

Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports

x11-drivers/xf86-input-synaptics: Spell LICENSE correctly

Split out evdev headers from multimedia/v4l_compat

Split out evdev headers (input.h, input-event-codes.h, uinput.h) into their
own port, devel/evdev-proto, and update those to be current with the Linux
4.19 kernel.  This is done in order to be able to update the rest of the
FreeBSD input stack, which is forthcoming.

By splititng out the evdev headers we can update them independent of other
updates in v4l_compat, which makes it easier for the graphics team to keep
track of them and keep them updated as needed.

Update devel/libevdev from 1.4.4 to 1.5.9 instead of trying to make it work
with the updated headers.  This will be further updated.

Update devel/py-evdev from 0.5.0 to 0.8.1 instead of trying to make it work

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

x11-drivers/xf86-input-synaptics: Update to 1.9.1

Update X.org WWWs

Approved by:	portmgr blanket

Xorg-servers update to 1.18.4 with driver updates and revision bumps.

Update xf86-video-ati to 7.8.0
Update xf86-video-intel to 2.99.917.20170103
Update xf86-input-synaptics to 1.9.0
Update xf86-input-evdev to 2.10.5
Update xf86-video-r128 to 6.10.2
Update xf86-video-rendition to 4.2.6
New port: xf86-video-geode

PR:		214591,216269,214687,214593,214715,216276,216277,216278,216287,
		216288,216292,216298,214560,216299,216300,216301,216302
Approved by:	swills (mentor, portmgr)
Differential Revision:	https://reviews.freebsd.org/D9436

Xorg-server update to 1.17.2 with related driver updates and bumps.

Update fontproto to 2.1.3.
Update libXfont to 1.5.1.
Update xf86-input-keyboard 1.8.1.
Update xf86-input-vmmouse to 13.1.0.
Update xf86-input-void to 1.4.1.
Update xf86-video-chips to 1.2.6.
Update xf86-video-cirrus to 1.5.3.
Update xf86-video-mach64 to 6.9.5.
Update xf86-video-neomagic to 1.2.9.
Update xf86-video-r128 to 6.10.0.
Update xf86-video-s3virge to 1.10.7.
Update xf86-video-savage to 2.3.8.
Update xf86-video-siliconmotion to 1.7.8.

Misc X.org port updates:

Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.

Remove empty files

x11-servers/xorg-server: Update to 1.14

The X.Org server has been updated to 1.14. The changes it brings are described
in a post on the Graphics team blog:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/

The most noticable change is the DEVD input device autodetection backend
which is enabled by default, replacing the HAL backend. The keyboard
layout configuration must be migrated from HAL's .fdi files to X.Org
files. The procedure is explained in the post mentionned above.

Several ports were removed with this update, mainly because they are not
compatible with the X.Org server anymore:
    o  nvidia-driver-71
    o  nvidia-driver-96

Fix the PORTREVISION bump for the lang/gcc update that went badly for
ports (x11-drivers plus graphics/libGL plus x11-servers/xorg-server)
that handle PORTREVISION in a creative manner hardly lending itself
to any form of automated bumping.

PR:		192025
Reported by:	Scott Allendorf <scott-allendorf@uiowa.edu>

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-drivers)

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

Fix patching by removing a obsolete patch.

Reported by:    rakuco@

- Please welcome Xorg 7.5.2

       The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10.0

Notes: all x11@ ports fixed for FreeBSD 10

- Please welcome Xorg 7.5.1

The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

        Beat Gaetzi
        Dima Panov
        Koop Mast
        Eitan Adler
        and all Testers.

PR:             ports/147646
                ports/148035
                ports/148744
                ports/150223
                ports/152889
                ports/154457

- Fix build on 6.X

- Update to Xorg 7.5

The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:

http://www.x.org/releases/X11R7.5/

A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.

For updating try

portupgrade -af \*

Chase xorg-server update and bump driver PORTREVISIONS.

Revert to 1.1.2 for xorg big upgrade.

Pointy hat to:  myself

Update to 1.2.1.

PR:             ports/141781
Submitted by:   Denis Shaposhnikov   dsh at wizard volgograd ru

Update to 1.1.2

Update to 1.1.1

Chase xserver update with driver port bumps.

Update to 1.1.0

PR:             133998
Submitted by:   Eygene Ryabinkin <rea-fbsd@codelabs.ru>

Chase the Xorg server update and bump ports that depend on it.

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).