===> The following configuration options are available for xf86-input-wacom-0.39.0_4:
DEBUG=off: Build with debugging support
TEST=off: Build and/or run tests
===> Use 'make config' to modify these settings
Mk/Uses/xorg-cat.mk: Resurrect CATEGORIES=proto and switch EXTRACT_SUFX to xz
Resurrect CATEGORIES=proto to simplify the port's Makefile.
Remove experimental from the meson's comment, as some ports have fully
transitioned to building with Meson.
Upstream has switched from bz2 to xz, so update EXTRACT_SUFX.
PR: 298092
Approved by: x11 (arrowd)
Approved by: fluffy (mentor)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Bump portrevision for devel/evdev-proto
Bump portrevision on everything with a build dependency on
devel/evdev-proto, to chace the update of evdev-proto in r550442.
Update xorg x11 servers to 1.20.7
Update xorg x11 servers to 1.20.7. This updates x11-servers/xorg-server,
xephyr, xorg-dmx, xorg-nestserver, xorg-vbserver and xwayland.
Enable the UDEV backend by default, instead of the DEVD backend, for
autoconfiguration of input devices on FreeBSD 12 and later.
FreeBSD 11 lacks the needed support in base and will keep on using the DEVD
backend.
Support for the HAL backend is dropped completely, it has been deprecated
for a long time.
Update and improve the DEVD backend.
Add a pkg message about sysctl configuration that might be needed when using
UDEV.
(Only the first 15 lines of the commit message are shown above )
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
Split out evdev headers from multimedia/v4l_compat
Split out evdev headers (input.h, input-event-codes.h, uinput.h) into their
own port, devel/evdev-proto, and update those to be current with the Linux
4.19 kernel. This is done in order to be able to update the rest of the
FreeBSD input stack, which is forthcoming.
By splititng out the evdev headers we can update them independent of other
updates in v4l_compat, which makes it easier for the graphics team to keep
track of them and keep them updated as needed.
Update devel/libevdev from 1.4.4 to 1.5.9 instead of trying to make it work
with the updated headers. This will be further updated.
Update devel/py-evdev from 0.5.0 to 0.8.1 instead of trying to make it work
(Only the first 15 lines of the commit message are shown above )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
x11-drivers/xf86-input-wacom: update to 0.34.0 and fix stage-qa
Error: /usr/local/bin/xsetwacom is linked to /usr/local/lib/libX11.so.6 from
x11/libX11 but it is not declared as a dependency
Warning: you need USE_XORG+=x11
Error: /usr/local/bin/xsetwacom is linked to /usr/local/lib/libXext.so.6 from
x11/libXext but it is not declared as a dependency
Warning: you need USE_XORG+=xext
Changes: https://sourceforge.net/p/linuxwacom/mailman/message/35533919/
x11-drivers/xf86-input-wacom: prevent devd(8) loading ums(4) first
devd(8) tries to load drivers for some classes of devices while rc.d/wacom
disables ums(4) for wacom devices. Adding quirks after the driver is loaded
would be too late.
PR: 207506
Submitted by: rozhuk.im@gmail.com
MFH: 2016Q1
x11-drivers/xf86-input-wacom: new device and hotplug support
- Add device IDs for the following tablets:
Intuos Draw small
Intuos Art/Photo/Comic small
Intuos Draw medium
Intuos Art medium
- Add and enable devd(8) hotplug support
- Work around devd failing to remove stale device files opened by Xserver
- Drop Xserver 1.7 tip from pkg-message after r374982
PR: 206086
Submitted by: rozhuk.im@gmail.com
Xorg-server update to 1.17.2 with related driver updates and bumps.
Update fontproto to 2.1.3.
Update libXfont to 1.5.1.
Update xf86-input-keyboard 1.8.1.
Update xf86-input-vmmouse to 13.1.0.
Update xf86-input-void to 1.4.1.
Update xf86-video-chips to 1.2.6.
Update xf86-video-cirrus to 1.5.3.
Update xf86-video-mach64 to 6.9.5.
Update xf86-video-neomagic to 1.2.9.
Update xf86-video-r128 to 6.10.0.
Update xf86-video-s3virge to 1.10.7.
Update xf86-video-savage to 2.3.8.
Update xf86-video-siliconmotion to 1.7.8.
(Only the first 15 lines of the commit message are shown above )
multimedia/webcamd: clarify version requirements in consumers
webcamd exposes V4L/DVB/EVDEV/etc devices with consumer ABI configured
by v4l_compat version during build. Drop >0 dummy as V4L is available
since day 1 and we only want the daemon. This syncs RUN_DEPENDS with:
multimedia/gstreamer-plugins-v4l2
multimedia/gstreamer1-plugins-v4l2
x11-drivers/xf86-input-wacom: revert small part of r381903
|load_kld -e| cannot detect usb_quirk(4) at all and GENERIC kernel
always has it via |device usb|. So, the following happens:
$ kldstat -v | fgrep quirk
$ kldstat -m usb_quirk.ko
kldstat: can't find module usb_quirk.ko: No such file or directory
$ service wacom start
kldload: can't load usb_quirk: module already loaded or in kernel
/usr/local/etc/rc.d/wacom: WARNING: Unable to load kernel module usb_quirk
|kldload -n| is supported even by DragonFly, so there's no reason to
care for no longer supported FreeBSD 8.x.
x11-servers/xorg-server: Update to 1.14
The X.Org server has been updated to 1.14. The changes it brings are described
in a post on the Graphics team blog:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/
The most noticable change is the DEVD input device autodetection backend
which is enabled by default, replacing the HAL backend. The keyboard
layout configuration must be migrated from HAL's .fdi files to X.Org
files. The procedure is explained in the post mentionned above.
Several ports were removed with this update, mainly because they are not
compatible with the X.Org server anymore:
o nvidia-driver-71
o nvidia-driver-96
(Only the first 15 lines of the commit message are shown above )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update wacom input driver to 0.24.99.1
- replace rc.d script with a sample file to simplify configuration
- use the underlying install target; this exposes xorg headers which may
be used by gnome-settings-daemon
- drop gmake and autotools dependencies
- drop explicit xinput dependency
- require webcamd to get /dev/input/eventN
- require xinerama for xsetwacom display mapping
- explicitly disable doxygen docs
- add wacom to xorg-drivers port
- pass maintainership to submitter
- enable support of wacom tablets connected via a serial port [1]
- support stage
PR: 175876 , 181133 [1]
Submitted by: Jan Beich, aasoft@gmail.com [1]
Add an X.Org driver, a kernel module, and a script to configure X.Org
for Wacom tablets.
The X.Org driver is a port of the Linux Wacom Project's [1] work.
The kernel module required for USB tablets is provided by Bartosz
Fabianowski [2], and supports the following devices:
Graphire*, Graphire2*, Graphire3, Graphire4
Bamboo, Bamboo One*, Bamboo Fun
Intuos3, Cintiq 21UX
Volito*, Volito2*
PenStation2*, PenPartner2*
* not tested
PR: ports/128547
Submitted by: Dominic Fandrey [3]
Reviewed by: gabor
Approved by: gabor
[1] http://linuxwacom.sourceforge.net
[2] <freebsd (at) chillt (dot) de>
[3] <kamikaze (at) bsdforen (dot) de>
