Remove expired port:
2019-09-04 x11-toolkits/p5-Wx: Broken for more than 6 months

Deprecate ports broken for more than 6 months

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Mark BROKEN: fails to build

No wxWidgets build found
Compilation failed in require at ./Makefile.PL line 21.

Reported by:	pkg-fallout

wxGTK3.0: switch to gtk3 and webkit2

Discussed with:	portmgr

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Update to 0.9932

Changes:	http://search.cpan.org/dist/Wx/Changes

Update to 0.9931

Changes:	http://search.cpan.org/dist/Wx/Changes

Update to 0.9929

Changes:	http://search.cpan.org/dist/Wx/Changes

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Use real PORTVERSION and update dependent ports

- Sort PLIST

Fix building with Perl 5.25.

Unescaped left brace in regex is illegal in regex.

Sponsored by:	Absolight

- Remove outdated PERL_LEVEL check

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

x11-toolkits/p5-Wx: 0.99.27 -> 0.99.28

- also fix build error on 9.x

PR:		200309
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

- Remove useless WX_UNICODE
- Use BROKEN helper

Approved by:	portmgr blanket

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Move p5- ports from ports@ to perl@.

With hat:	perl@
Sponsored by:	Absolight

- Remove conditional dependency for outdated perl version
- Mark BROKEN on pre-10.x: even if it's made to build with some makefile hacks,
it still produces broken library because it doesn't respect LDFLAGS

Update to 0.99.27.

With hat:	perl@
Sponsored by:	Absolight

p5-Wx: Unbreak on some platforms

This port was using CFLAGS for c++, so the -std=c++11 flag wasn't getting
passed even when USE_CXXSTD was set.  This port broke in some places when
c++11 became a requirement of Wx.

This is still broken on FreeBSD 8 (F9 not tested) due to new problems
related to compiling with gcc48.

Fix build when linking with libperl.so.

With hat:	portmgr, perl
Sponsored by:	Absolight

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Reset maintainership

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- Remove empty files and directories

Approved by:	portmgr (antoine)

Update to 0.9923
Switch to use wxGTK 3.0

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

Remove unneeded USE_DISPLAY

- Remove unnecessary depend on PERL_LEVEL < 5.12

PR:		ports/178915
Submitted by:	az
Approved by:	maintainer (timeout)

- Update MAINTAINER email address for all my ports
- Convert Makefile header to new style if needed

Approved by:	swills (mentor)

- Update to 0.99.16
- Give maintainership to submitter
- Add LICENSE (ART10 and GPLv1)
- Rearrange section order, sort MAN3, cleanup TABs

PR:		ports/175445
Submitted by:	Po-Chien Lin <linpc@cs.nctu.edu.tw>

Convert to new options framework

Feature safe:	yes

- Reassign to the heap at maintainer's request

Approved by:	portmgr (implicit)
Feature safe:	yes
Redports:	ignore

- update png to 1.5.10

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr

- Kick MD5 support

- Update to 0.97

PR:             Cezary Morga <cm@therek.net> (maintainer)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 0.96 (fixes build)

Reported by:    pointyhat (via pav)

- Update to 0.95

PR:             ports/142702
Submitted by:   myself (pgollucci@)
Approved by:    maintainer timeout (cm@therek.net; > 2 weeks)

- Update to 0.94

PR:             140666
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

- Update to 0.93

PR:             139183
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

- Update to 0.92.

PR:             ports/138079
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Mark MAKE_JOBS_UNSAFE

PR:             136792
Submitted by:   myself
Approved by:    Cezary Morga <cm@therek.net> (maintainer)

- Fix core-dump with malloc debug on

PR:             ports/136135
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

- Update to 0.91

PR:             134721
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

- Update to 0.90

PR:             134424
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

wxPerl is an extension module allowing the creation of GUI (Graphical
User Interface) from Perl; it is built as a wrapper for the wxWidgets
C++ GUI toolkit.

WWW: http://wxperl.sourceforge.net/

PR:             ports/132406
Submitted by:   Cezary Morga <cm at therek.net>