python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Remove logic for Python < 3.6 for ports using Python 3.6+

Drop python 2.7 support from a few ports

With hat:	portmgr

x11-toolkits/py-Pmw: Add USE_PYTHON=concurrent

Approved by:	portmgr (port compliance, infrastructure)

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Update to 2.0.1

- Change MASTER_SITES to CHEESESHOP
- Sort *_DEPENDS
- Use USES=dos2unix
- Relax USES=python
- Convert to options target helper
- Do not silence installation messages
- Clean up Makefile
- Change WWW to PyPI

PR:		226782
Submitted by:	sunpoet (myself)
Approved by:	maintainer (timeout, 14 days)

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

- Fix shebangs

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

Support stage

- Chase x11-toolkits/blt library name change
- Bump PORTREVISION

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- Update *_DEPENDS on x11-toolkits/py-tkinter after _tkinter.so relocation

- Kick MD5 support

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with X

- Update to 1.3.2

PR:             ports/121392
Submitted by:   TAOKA Fumiyoshi <fmysh AT iijmio-mail.jp> (maintainer)

- Update to 1.3
- Rename to py-Pmw for consistence among other Python ports
- Use PYTHON_SITELIBDIR in pkg-plist
- Pass maintainership to submitter

PR:             ports/115302
Submitted by:   TAOKA Fumiyoshi <fmysh at iijmio-mail.jp>

- Forced commit to note the repocopy: x11-toolkits/pmw -> x11-toolkits/py-Pmw

PR:             115302
Repocopied by:  marcus