x11-toolkits/py-qt[56]-chart: Rename to *-charts

Move x11-toolkits/py-qt[56]-chart to x11-toolkits/py-qt[56]-charts to be
consistent with the names of their C++ counterparts.

Qt has always pluralized the Charts module, but PyQt didn't pluralize it
until Qt6. With the upcomming addition of the PyQt Graphs module, keeping
this singular would be even more awkwark.

While here:
Add all pyqt5 components except webengine to the devel/py-qt5 metaport
to be consistent with the devel/py-qt6 metaport.

PyQt: Update to latest versions

PyQt5:
- devel/py-qt5-pyqt: Update to 5.15.11
- graphics/py-qt5-3d: Add port
- net/py-qt5-networkauth: Update to 5.15.6
- www/py-qt5-webengine: Update to 5.15.7
- x11-toolkits/py-qt5-chart: Update to 5.15.7
- x11-toolkits/py-qt5-datavis3d: Add port

PyQt6:
- devel/py-qt6-pyqt: Update to 6.7.1

Build tools:
- devel/sip: Update to 6.8.6
- devel/py-qt5-sip: Update to 12.15.0
- devel/py-qt6-sip: Update to 13.8.0
- devel/py-qtbuilder: Update to 1.16.4

The build tools are now all licensed BSD2CLAUSE and have been converted
to PEP517.

*/*: Chase devel/qscintilla2 flavorization

devel/qscintilla2*: Flavorize ports

x11-toolkits/py-qt5-chart: Fix pkg-plist

Add ${PY_SETUPTOOLS} to BUILD_DEPENDS for when it is removed as a
global RUN_DEPENDS. [1]

PR:		270510 [1]

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

*/*: Update PyQt, Sip, QSCintlla2

PR:		267203
Exp-run by:	antoine

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these

*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine

devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine

*/py-qt5-*: Remove Digia's mention in pkg-descr

There was Trolltech, Nokia, Qt Project, Digia and today The Qt Company.
To avoid replacing the name at each structure, we will simply mention
that:
"PyQt5 is a set of Python bindings for Qt5 application framework"

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

Update qscintilla2 to 2.11.6

Remove empty PY_ENUM34 from ports using Python 3.6+

Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1

PR:		251764
Exp-run by: antoine

PyQt: fix flavors

py-qt modules require sip-module to build, unfortunately, it is hardcoded and
links to the default python version.

There is no option to pass it in like sip binary, so we need to patch
configure.py file.

Reported by:	fluffy
Approved by:	fluffy

Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.

- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0

SIP is a collection of tools  to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

x11-toolkits/py-qt5-chart: Add extra PyQt5 module from Rivervank Computing

PyQtChart is a set of Python bindings for The Qt Company's Qt Charts library.
The bindings sit on top of PyQt and are implemented as a single module.