x11-toolkits/soqt: update to 1.6.3

Release Notes:
  https://github.com/coin3d/soqt/releases/tag/v1.6.3

*/*: Remove incorrect libtool dependency

All these ports builds without libtool

Tested using Poudriere

Approved by:	portmgr (blanket, build fix)

x11-toolkits/soqt: update to 1.6.1

https://github.com/coin3d/soqt/releases/tag/v1.6.1

audio/opus: bump consumers after update to 1.4

x11-toolkits/soqt: switch master site

The Bitbucket distribution point is no more, and the main repository
now lives on Github. At the same time, the auto-generated tarballs
over there cannot be used (they lack the submodules required for
building, and upstream documents that over here:
  https://github.com/coin3d/soqt/releases
Just point MASTER_SITES at the correct tarball. On the upside, we
now get the gzipped file (still, the tarball is a little bit larger
as it now contains some mercurial leftovers, but it is the same for
all relevant content - I checked).
While here, add glu to USE_GL as advised by testport.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

update the Coin3D stack to it's latest release

Coin has moved to a new place on the web https://coin3d.github.io/
and the project has rolled new releases. Additionally, it's undergoing
relicensing (most parts are now licensed user BSD 3-clause).

This updates
  graphics/Coin to 4.0
  graphics/py-pivy to 0.6.5
  x11-toolkits/soqt to 1.6.0

Further, graphics/py-pivy-devel and x11-toolkits/soqt-devel have been
renamed to graphics/py-pivy and x11-toolkits/soqt respectively (losing
their -devel suffixes). Previously, these ports had been forks and/or
pre-releases of the old Qt4-based pivy and soqt ports. As these old ports

Qt4 deprecation: Remove Qt4 and its consumes.

2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Get rid of QT_PREFIX in favour of PREFIX.

QT_PREFIX was a remnant of a bygone time.

Reviewed by:    rakuco
Approved by:    rakuco (mentor)
Differential Revision:  https://reviews.freebsd.org/D8825

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE
- Strip library

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Update WWW and MASTER_SITES for four coin3d ports

 * graphics/Coin
 * graphics/simage
 * x11-toolkits/soqt
 * x11-toolkits/soXt

PR:		192442
Submitted by:	Shane Ambler
Approved by:	general blanket (1/4 ports maintained)

x11-toolkits/soqt: Force no-debug build (from dports)

When built with debug flag, this port changes the name of the installed
files thus failing at stage phase.  For now, disable the detection and
force configuration without debug

- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

- Fix build with clang
- Add LICENSE

PR:		187740
Submitted by:	Ports Fury

- Convert USE_XZ/BZIP2/GMAKE to USES

Reset maintainership by maintainer's request.

Thank you for your past work on this, Cristiano!

PR:		187228  187227
Submitted by:	Cristiano Rolim Pereira <cristianorolim@hotmail.com> (maintainer)

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 support

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update to 1.5.0

PR:             based on ports/144778
Submitted by:   Cristiano Rolim Pereira (maintainer)

../soqt.log

- update to jpeg-8

- BUMP PORTREVISION due of update of graphics/Coin.

Approved by:    itetcu (mentor)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Switch to use Qt4.
Pass maintainership to submitter.

PR:             based on ports/130925
Submitted by:   Cristiano Rolim Pereira <cristianorolim at hotmail.com>

Mark BROKEN: does not build.

- Chase graphics/Coin shlib bump
- Bump portrevision

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

bump PORTVERSION for shared library version changed of graphics/Coin

Reported by:    erwin via pointyhat

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.4.1

PR:             ports/109430
Submitted by:   Marcelo Araujo <araujo@bsdmail.org>

Use libtool port instead of included version to avoid objformat a.out botch

- Fix MASTER_SITES

PR:             ports/104930
Submitted by:   Thomas Abthorpe <thomas@goodking.ca>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Update to 1.3.0

PR:             95880
Submitted by:   Martin Wilke

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Chase recent libCoin update

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to 1.2.0
Chase Coin share library

PR:             77979
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Add missing file

Clean up time for email addresses MIA!
If you know new email addresses for the people involved, please send-pr it!

<mcsi@agava.com>: host relay.agava.net.ru[195.161.118.3] said: 550
    <mcsi@agava.com>: User unknown in local recipient table (in reply to RCPT
    TO command)

<woju@bbsmail.ntu.edu.tw> (expanded from <woju@bbsmail>): Host or domain name
    not found. Name service error for name=bbsmail.ntu.edu.tw type=A: Host not
    found

<esoha@attbi.com>: host gateway.attbi.com[204.127.198.6] said: 551 not our
    customer (in reply to RCPT TO command)

<crow@nektor.hu>: host mail.kapu.hu[195.70.32.236] said: 550 unknown user (in

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Fix Coin dependency.

Reported by:    bento

Add port soqt, Qt GUI component toolkit library for Coin.
It is compatible with SGI and TGS Open Inventor, and the API is
based on the API of the InventorXt GUI component toolkit.

PR:             49072
Submitted by:   Roland Jesse <roland.jesse@gmx.net>