Remove a not stage friendly abandonware

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Update to 2.5.0

PR:             155852
Submitted by:   Ports Fury

Replace some @FOO@ placeholders the configure script fails to substitute.
This also obviates the need for gmake.

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 2.4.2

PR:             141821
Submitted by:   Ports Fury

- Switch SourceForge ports to the new File Release System: categories starting
with X

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 2.4.1

PR:             121804
Submitted by:   Ports Fury

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE from categories starting with X

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

- Fix build. Unbreak.

PR:             ports/81865
Submitted by:   Ports Fury

Bump PORTREVISION to chase the glib20 shared lib version change.

BROKEN: Incomplete pkg-plist

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Update to version 2.4.0

PR:             ports/68866
Submitted by:   Ports Fury

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

SIZEify.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Update to version 2.0.5

PR:             59471
Submitted by:   Ports Fury

Reset maintainer on ports owned by the following committers who have
been inactive for over 12 months and did not respond to my email confirming
their status: keith, nakai, torstenb

Reviewed by:    portmgr

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Fix things after recent GNOMENG commit.

Deploy USE_GNOMENG infrastructure

PR:             42309
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Remove USE_NEWGCC, which is no longer supported or required.

Submitted by:   Tilman Linneweh <tilman@arved.de>
PR:             ports/40571

Batch of style fixes for x11-toolkits.    

PLIST fixes to ports which I touched recently.  Not all caused by my   breakage.
   

Convert category x11-toolkits to new layout.  

Implement WANT_GNOME.    

Update to 1.2.3    

Update to 1.2.2    

Update to 1.2.1    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I  
just cun'n'pasted the name from Satoshi's commit message without checking   it. 
  

First round of INSTALL_SHLIB fixes.