x11-wm/metacity: Moved man to share/man

Approved by:    portmgr (blanket)

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

x11-wm: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger
  *  Alejandro Pulver <alepulver@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Brett Taylor <brett@peloton.physics.montana.edu>
  *  Brian Handy <handy@physics.montana.edu>
  *  Bruce A. Mah <bmah@ca.sandia.gov>

x11-wm/metacity: update to 3.44.0

x11-wm/metacity: Update to 3.42.0

x11-wm/metacity: Update to 3.40.0

Remove # $FreeBSD$ from Makefiles.

Update to 3.36.1

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

Sprinkle some PORTSCOUT macros around to either mark ports:
 * ignore because there will not be any new releases.
 * check specific versions or ignore devel versions.

Update cinnamon to 2.4, this should fix [1] and [2].
Update totem to 3.14 now that we have gstreamer 1.4 and minor gnome updates.
Update evolution suite to 3.12.9.
Make sure gtk30 pulls in adwait-icon-theme, since it now the default theme [3].

PR:		195290 [1], 195289 [2], 195455 [3]
Obtained from:	gnome devel repo

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage
modernize

- Remove manual creation and removal of share/applications, as it's now in the
mtree (remaining categories)
- Add note on mtree change to CHANGES

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

Add an explicit dependency on pkgconf

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Fix the dialog popup about windows not supporting 'save current setup'. Bump
the PORTREVISION.

Reported by:    Barbara <barbara.xxx1975@libero.it>,
                Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Submitted by:   marcus
Obtained from:  http://bugzilla.gnome.org/show_bug.cgi?id=588119

Due a zero-change PORTREVISION bump on these two ports to get people to rebuild
them.  There is an issue with the 8.1 package set which can cause some problems.
A rebuild of these ports should correct things.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Update to 2.28.1.

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Update to 2.20.2.

Update to 2.20.1.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Update to 2.18.5.

Update to 2.18.3.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.18.2

Update to 2.18.1.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Update to 2.16.5.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

- Update to 2.14.5

Fix a crash that occurred when changing the screen resolution.

GNOME Bugzilla: http://bugzilla.gnome.org/show_bug.cgi?id=340847

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 2.12.3.

Update to 2.12.2.

- Add SHA256 checksums

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

Update to 2.10.3.

Update to 2.10.2.

Fix some really weird plist corruption.

Reported by:    GNOME Tinderbox

Update to 2.10.1.

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

Update to 2.8.13.

Tweak better CONFLICTS: s/expocity*/expocity-[0-9]*/g

Update to 2.8.8

Use new GCONF_SCHEMAS.

Approved by:    pav

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Hack around a window focus problem in the new metacity.  This is a messy hack,
but it will do until the bug can be fixed for real.  See
http://bugzilla.gnome.org/show_bug.cgi?id=149028 for more details.

PR:             70087
Obtained from:  http://bugzilla.gnome.org/show_bug.cgi?id=149276

Update to 2.8.2.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Use the new GConf handling policy, this will be required for GNOME 2.7/2.8 or
those ports will not work. Please see the more detail about this:

http://lists.freebsd.org/pipermail/freebsd-gnome/2004-June/007253.html

Also, please check http://www.freebsd.org/gnome/docs/porting.html for the
update about gconf, gconf.pl script and etc.

Approved by:    marcus (portmgr hat)
Reviewed by:    My team, FreeBSD GNOME Team

Register conflicts with new port x11-wm/expocity.

Update to 2.8.1

Presenting GNOME 2.6.0.  The FreeBSD GNOME Team feels this our best release
ever.  It fixes many bugs, and adds some features missing in previous
FreeBSD ports.  To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:

http://www.freebsd.org/gnome/docs/faq26.html

Please read it carefully.  GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:

http://www.marcuscom.com/tinderbox/

The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts.  We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.

Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 2.6.5.  The most notable change is that while using
focus-follows-mouse, clicking inside a window will raise it as it did
under 2.4.x.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Update to 2.6.3

Update to 2.6.2.

Update to GNOME 2.4.0.  For all the goodies on what's changed, known issues,
future plans, etc., please see http://www.gnome.org/start/2.4/.

This commit represents work done by adamw, bland, and myself as well as
many other contributers:

Koop Mast <einekoai@chello.nl>
Akifyev Sergey <asa@gascom.ru>
Franz Klammer <klammer@webonaut.com>
?yvind Kolbu <oyvind@kebab.gaffel.nu>
Thomas E. Zander <riggs@rrr.de>
Jeremy Messenger <mezz7@cox.net>

Without these contirbuters, and our faithful users, GNOME 2.4.0 would not
be possible.

Please check the FreeBSD GNOME site for any FreeBSD gotchas, as well as
general FAQs and documentation (GNOME 2.4 updates to be posted soon).  The
best way to upgrade so that you get all shared library dependencies is:

portupgrade -rf -m BATCH=yes atk
portupgrade -R -m BATCH=yes gnome2

Approved by:    portmgr (kris, will, myself implicitly)
Requested by:   re as well as many other users

Remove REINPLACE commands that were rolled into gnomehack.

Fix theme loading on Sparc64.

Reported by:    kris

Update to 2.4.55.

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Remove the WWW link.  There really is no website of metacity anymore.

Submitted by:   Simon Barner <barner@in.tum.de>

Update to GNOME 2.2.

This is Phase I.  All existing ports have been updated to their GNOME 2.2
counterparts.