Convert more of my ports to new manual page location (part two).

x11-wm/sawfish: do not rebootstrap, install missing files

- Drop `autoreconf' from USES added in commit 246008f171263
  for development version 1.12.90 which apparently required
  it, current stable version comes properly bootstrapped
- Fix the tar(1) command so all theme files are installed
  regardless of version thereof (bsdtar 3.5.1 traditionally
  defaults to /dev/sa0 while versions 3.6.x write to stdout
  which probably makes more sense nowadays)
- Assume maintainership for the time being, pet portlint(1)

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

*/*: bump all consumes of deprecated GDK-Pixbuf-Xlib library

With hat:	desktop

x11-wm: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger
  *  Alejandro Pulver <alepulver@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Brett Taylor <brett@peloton.physics.montana.edu>
  *  Brian Handy <handy@physics.montana.edu>
  *  Bruce A. Mah <bmah@ca.sandia.gov>

x11-wm/sawfish: update to 1.13.0

 * Add missing dependencies
 * Remove merged patch.
 * Remove noop REINPLACE_CMD

Reported by:	portscout

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

Remove # $FreeBSD$ from Makefiles.

x11-wm/sawfish: Fix build with -fno-common

Add a patch from upstream to fix the build of x11-wm/sawfish with
-fno-common, which is the default with llvm 11.

MFH:		2020Q3 (implicit, -fno-common fixes, ok by joenum)

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

x11-wm/sawfish: Update 1.12.0 -> 1.12.90

Reset maintainer due to extended timeouts on bug #240101, #240100, #240089, as
per policy.

PR:		240101
Approved by:	dem.procopiou@gmail.com (maintainer's timeout; 62 days)

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Update to version 1.12.0

PR:		211825
Submitted by:	Demetris Procopiou (maintainer)

- Update to version 1.11.91
- Take maintainership
- Register dependencies found by stage-qa
- COnvert to USES=localbase

PR:		211601
Submitted by:	Demetris Procopiou

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Update to 1.11.90.

PR:		207778
Submitted by:	jochen@jochen-neumeister.de

- Strip libraries

Get rid of gnomehier

- Update to release of Sawfish 1.11, codename "Apollo"
- Make translations optional (with OPTIONS_DEFINE=NLS)
- Kill bogus EOL whitespace in the port description
- Cleanup pkg-plist from @dirrm* entries (no longer needed)
- While here: sort USES, make COMMENT more descriptive

Allow to build with texinfo from ports

svn commit: r356276 - head/x11-wm/sawfish

- Convert USE_BZIP2/XZ to USES

Approved by:	portmgr

- Update to version 1.10

PR:		187038
Submitted by:	ports fury

Stage support

- Remove manual creation and removal of share/applications, as it's now in the
mtree (remaining categories)
- Add note on mtree change to CHANGES

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

The FreeBSD GNOME team presents a Glib and Gtk+ 3 update.

This update updates Glib20 to 2.36 and Gtk+ 3.8

* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
  It is replaced by a GIO kqueue implementation developed as part of a NetBSD
  GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
  pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
  prevent creation of /  root/.cache dir. Defaults to build & run depend,
  but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
  pangox support which was removed from the pango port. Add it to ports still
  using pangox API.

Exp-run by:	bapt@
PR:		ports/178958 [1]
Submitted by:	emaste@ [1]

- Update lang/librep to 0.92.3
 - Remove shlib versions
 - Add USE_READLINE and USES= pkgconfig
 - Update CPPFLAGS and LDFLAGS
 - Update pkg-descr

- Update x11-toolkits/rep-gtk2 to 0.90.8.1

- Update x11-wm/sawfish to 1.9.1
 - Add ART20 license and set LICENSE_COMB to multi
 - Update USE_XORG to include xtst
 - Add USES= pkgconfig
 - Add PORTSCOUT to exclude unstable releases

- Trim Makefile headers
- Update MASTER_SITES

PR:           ports/170173
Submitted by: KATO Tsuguru <tkato432 _at_ yahoo.com>
Approved by:  beat (mentor)

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

Don't remove share/gnome/wm-properties it belongs to gnomehier, add implicit
depend on gnomehier too.
While here trim header, and use pathfix.

Submitted by:	miwimail

- update png to 1.5.10

Update to 1.8.2

PR:             161625
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Update to 1.8.1

PR:             158512
Submitted by:   Ports Fury

- Update to 1.8.0

PR:             155855
Submitted by:   Ports Fury

- Get Rid MD5 support

Reset anray@FreeBSD.org due to maintainer-timeouts and no response to email.

Hat:            portmgr

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Fix pkglist and unbroke port.

Mark BROKEN: leaves files behind on deinstallation

- Update to 1.5.2

pkg-plist: add a couple of files in libexec/rep and @dirrmtry a few
shared directories, according to pointyhat.

Add missing dependencies on audio/libaudiofile and esound.

Noticed by:     pav

USE_XORG: add ice, sm, xft, xinerama and xrandr, which I missed on the last
upgrade.

Noticed by:     erwin

Upgrade to version 1.5.0.

Approved by:    maintainer

- Switch SourceForge ports to the new File Release System: categories starting
with X

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 1.3.5.3

- Fix pkg-plist

- Update to 1.3.5.2

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 1.3.3
- Update WWW and description
- Pass maintainership to me. [1]

PR:             ports/120053
Approved by:    maintainer (gnome via mezz) [1]

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Chase librep shared lib version bump.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix the build with GCC 4.x.

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Portlint:
        -Use DATADIR in plist.

x11-wm/sawfish2 -> x11-wm/sawfish

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for other ports, chase the rename.

Begin the de-orbit burn of the GNOME 1.4 desktop.  This is phase I.  All
core desktop components are being removed.

* Use makeinfo --no-split to avoid plist problems [1]
* Fix the ordering of DISTNAME to quiet portlint

PR:             54312 [1]
Submitted by:   nork [1]

Remove REINPLACE commands that were rolled into gnomehack.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Remove the renaming of Xft headers and library from the Xft (Xft2) port.
Remove installing of Xft1 from XFree86-4-libraries, and add dependencies
to the Xft port by all the ports that use it along with whatever patches are
necessary.

Approved by:    portmgr (kris), marcus

Update to 1.2.

Deploy USE_GNOMENG infrastructure

PR:             42305
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).

The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.

Please report any unusual problems to gnome@FreeBSD.org.

Discussed with: marcus
Reviewed by:    marcus

Update to 1.1.

- Chase librep shlib version bump;
- use USE_REINPLACE.

Comment out DIST_SUBDIR=gnome pending next version update.    

Since sawfish (and dependencies) are critical parts of the GNOME   environment,
track the versions available on the GNOME sites, to ensure   maximum
compatibility.    

Just in the case undefine `WITHOUT_ALL' when building on bento.    

Rework optional dependency mechanism, so it's always produces -gnome version  
of package on the bento.    

When building package forcefully turn optional GNOME components on, otherwise  
gnome and gnome-fifth-toe packages contain incorrect dependencies list.    

Use ${ARCH}-pc-freebsdX as CONFIGURE_TARGET instead of ${ARCH}-freebsdX. I   did
not see any problems with the later on my local box, but it doesn't do   any
harm, so put it in to make few users happy.    

Update to 1.0.1.    

Update to 1.0.    

Update to 0.99.    

The thing installs share/gnome/pixmaps/sawfish-logo.png even in the NOGNOME  
case, so adjust PLIST accordingly to make bento happy.    

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

-pthread --> ${PTHREAD_LIBS}   -D_THREAD_SAFE --> ${PTHREAD_CFLAGS}    

Update to 0.38.    

Update to 0.37.3.    

Update to 0.37.2.    

Layout fixes in x11-wm.    

Update to 0.36.    

Update to 0.35.    

Add zh_TW.Big5 translation.    

Update to 0.34.    

Update to 0.33.1.    

Update to 0.33.    

Fix pkg-plist.    

Update to 0.32.