Eterm is a color vt102 terminal emulator intended as a replacement for
xterm. It is designed with a Freedom of Choice philosophy, leaving as
much power, flexibility, and freedom as possible in the hands of the
user. It is designed to look good and work well, but takes a
feature-rich approach rather than one of minimalism while still
maintaining speed and efficiency.
===> The following configuration options are available for eterm-0.9.6_10:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Reported by: swills
Mark as broken on aarch64 due to missing file 'gdb.scr' on install.
This is probably easy to fix, but I can't figure it out right now.
Approved by: portmgr (tier-2 blanket)
Rename all files containing a : in their filename.
While there, run make makepatch on affected ports, and rename patches
accordingly.
Sponsored by: Absolight
- Remove Mk/bsd.efl.mk
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
which depends on imlib2
PR: 196062
Approved by: portmgr
Fix the way --with-mmx is passed to configure.
<OPTION>_CONFIGURE_ARGS does not exist, so the option was not being passed
at all. We need <OPTION>_CONFIGURE_WITH here.
CR: D357
Approved by: olgeni (maintainer)
Force numerous ports that fail to build with clang over to instead always
rely on gcc. The patch uses the new USE_GCC=any code in Mk/bsd.gcc.mk to
accomplish this.
The ports chosen were ports that blocked 2 or more ports from building with
clang. (There are several hundred other ports that still fail to build with
clang, even with this patch. This is merely one step along the way.)
Those interested in fixing these ports with clang, and have clang as their
default compiler, can simply set FORCE_BASE_CC_FOR_TESTING=yes.
For those who have gcc as their default compiler, this change is believed
to cause no change.
Hat: portmgr
Tested with: multiple runs on amd64-8-exp-bcm and 9-exp-clang, with various
combinations of patch/no-patch and flag settings.
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
- Update enlightenment-devel and EFL libraries to the latest snapshot
- Deprecate old unsupported apps and modules (entice, devian, eveil, engage)
- Split evas and ecore to separate modules to handle dependencies properly
- Disable PAM in enlightenment-devel as it don't work anyway (requires root
privilegies)
- Add DBUS support.
Thanks to: az
- Update e17 ports to 20070223 snapshot
- Bump portrevisions on all imlib2-dependend ports as the library soversion
was bumped [1]
- Disable fade-in effects in x11-fm/evidence permanently, since evas doesn't
support it anymore. [2]
The patch was tested in the tinderbox.
Approved by: portmgr (marcus) [1],
Anders Troback <freebsd@troback.com> (maintainer) [2]
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
detect imlib2 correctly. Otherwise it produces "useless" Esetroot binary
like this:
| $ ./bin/Esetroot
| Eterm was built without pixmap support, so Esetroot is fairly useless. Sorry.
maintainer timeout for 10 days.
1: Upgrade imlib2 to 1.2.0
2: chase shared library version to 3.
PR: ports/78347
Submitted by: Russell Jackson <raj at cserv62.csub.edu>
Somepart by: me
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Chase checksum change.
* Stability/compilation bugfixes
* Configure/automake improvements
* Escreen bugfixes (still alpha)
* Support for one more key name (XK_ISO_Left_Tab)
* Support for more color change sequences
Upgrade to 0.9.2, including the following changes:
* Use the "Eterm" termcap entry, which has been available in -STABLE
for quite some time.
* No longer depend on man2html.
* Do not install .la files.
(largely based on a port by Philip Paeps <philip@paeps.cx>)
