wdm -- WINGs Display Manager (was initially called DisplayMaker).
This is a modification of XFree86's xdm package for graphically
handling authentication and system login. Most of xdm has been
preserved (XFree86 3.3.2.3) with the Login interface based on a WINGs
implementation using Tom Rothamel's "external greet" interface.
===> The following configuration options are available for wdm-1.28_17:
PAM=on: Pluggable authentication module support
===> Use 'make config' to modify these settings
all: drop support for expired FreeBSD 14.0
Simplify expressions for FreeBSD 13.X
Reviewed by: many
Differential Revision: https://reviews.freebsd.org/D46601
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Unbreak the build by replacing recently removed `get-wings-flags ...'
program invocations with corresponding `pkg-config WINGs ...' ones.
As we now non-trivially patch the configure script, merge the changes
made with sed(1) into the patch file.
- Resurrect and provide working distfile locations
- Define LICENSE (GPLv2+), drop sparc64 "support"
- Add missing X11 components to the USE_XORG list
- Improve the port description, update WWW line
Remove expired ports:
Adjusted for ports rescued since r534032
2020-05-05 audio/festvox-czech: Broken for more than 6 months
2020-05-05 audio/gkrellmvolume2: Broken for more than 6 months
2020-05-05 audio/mixmos: Broken for more than 6 months
2020-05-05 audio/mma: Broken for more than 6 months
2020-05-05 audio/pd-cyclone: Broken for more than 6 months
2020-05-05 audio/shorten: Broken for more than 6 months
2020-05-05 audio/taglib-sharp: Broken for more than 6 months
2020-05-05 audio/xhippo: Broken for more than 6 months
2020-05-05 biology/consed: Broken for more than 6 months
2020-05-05 biology/plinkseq: Broken for more than 6 months
2020-05-05 biology/seqtools: Broken for more than 6 months
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
Split devel/gettext in devel/gettext-runtime and devel/gettext-tools. The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt. Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.
USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools. USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.
Update gettext to 0.19.3.
Remove :oldver from converters/libiconv and devel/gettext-runtime. Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports. When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.
Fix some ports that installed files in lib/locale instead of share/locale.
PR: 194038
Reviewed by: bapt
Exp-run: antoine
Approved by: portmgr (antoine)
x11-wm/libwraster:
- USES=libtool
- Remove -DPREFIX=\\\"${PREFIX}\\\" from CPPFLAGS. Not needed and it
causes configure test failures with clang.
- Use MAKE_CMD.
- Bump dependent ports.
x11-wm/windowmaker:
- USES=libtool
- Replace -DPREFIX=\\\"${PREFIX}\\\" in CPPFLAGS with post-patch command
because it causes configure test failures with clang.
- Remove FreeBSD < 8 support.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
It's unclear why removing LDFLAGS="${LDFLAGS}" from CONFIGURE_ENV
works, but it does allow it to build, so let's go with this till
someone comes up with a better solution.
PR: ports/74169
Submitted by: Florian Franzmann <siflfran@hawo.stw.uni-erlangen.de>
Include updated patch from Ports Fury that fixes install problem
by creating all install directories. Updates the pkg-plist file
which I forgot in my last commit.
Submitted by: KATO Tsuguru <jungle@m8.dion.ne.jp>
Update to wdm 1.26. Highlights of changes:
- daemon mode works again
- spanish and czech translations added
- en locale is now different from C locale.
- fixed problem with wdm not reacting to signals sent
to process with pid written to pid file.
- removed unused code
- many other bugfixes
See NEWS, README, and ChangeLog for the complete list.
PR: ports/57010
Submitted by: Ports Fury
Approved by: maintainer timeout (>3 months)
Set the user's credentials: uid, gid, groups, environment
variables, resource limits, and umask.
Pointed out by: kan
Submitted by: Ports Fury
Approved by: maintainer implicitly
ix11/wdm project moved, update MASTER_SITES and WWW
The wdm project moved, so the distfile is no longer fetchable
at the old MASTER_SITES. Update MASTER_SITES and WWW. The
new author obviousle created a new tarball with a different
md5. Both tarballs include the same files as checked by
diff.
PR: ports/47299
Submitted by: Erwin Lansing <erwin@lansing.dk>
Approved by: maintainer timeout
* Take over maintainership of this port.
* Take a shot at fixing the broken PAM support, which could never possibly
have worked under FreeBSD because it was using the Linux/Solaris
PAM module path. Enable PAM by default on 5.0 and install a config
file derived from /etc/pam.d/xdm.
* Take over maintainership of this port.
* Take a shot at fixing the broken PAM support, which could never possibly
have worked under FreeBSD because it was using the Linux/Solaris
PAM module path. Enable PAM by default on 5.0 and install a config
file derived from /etc/pam.d/xdm.
Unbreak the port by getting rid of -ldl which we don't have.
I submitted this fix to the author several days ago but got no
answer yet.
Approved by: knu (mentor)
Add Xinerama support for WDM (yay!!). Bump PORTREVISION.
George helped me better understand the Xinerama API. Please note that
there is no support for specifying a particular physical display for
which the login frame should appear -- it will always choose physical
screen number zero.
Helped with this patch: George Staikos <staikos@kde.org>
First round of auto* cleanups: - USE_AUTO* -> USE_AUTO*_VER=* where required
- USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK -
Other minor changes to fix things