This package contains xtrans, a library of code that is shared among X
packages to handle network protocol transport in a modular fashion,
allowing a single place to add new transport types.
x11/xtrans: Don't unlink X11 Unix sockets.
Without this change calling `Xorg -displayfd ..` would always make X to use
:0 as the DISPLAY. This was a showstopper for running parallel desktop sessions.
The leftover UDS' are cleaned up during system's boot by the /etc/rc.d/cleartmp
service.
Based on work of jbeich and Olivier Certner <olivier.freebsd@free.fr>.
PR: 253277
Approved by: manu
Sponsored by: Serenity Cybersecurity, LLC
Differential Revision: https://reviews.freebsd.org/D30557
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
Update the following Xorg components:
libXext to 1.3.3
libxcb and xcb-proto to 1.11
libxkbcommon to 0.5.0
pixman to 0.32.6
xinit to 1.3.4
xkeyboard-config to 2.13
xrandr to 1.4.3
xtrans to 1.3.5
Use INSTALL_TARGET=install-strip for stripping.
Drop @dirrm[try] from plist
Obtained from: xorg-dev repo
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:
MESA 9.1.6
Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)
(Only the first 15 lines of the commit message are shown above )
Add conflicts between x11/libXtrans and x11/xtrans, they install the same
files. [1]
Mark x11/libXtrans as DEPRECATED, since it is obsolteted upstream, and set
removal date one month from now. Nothing in ports uses x11/libXtrans
anyway.
PR: ports/181512 [1]
Submitted by: Gerald Pfeifer <gerald@pfeifer.com> [1]
The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
(Only the first 15 lines of the commit message are shown above )
- update iceauth to 1.0.5
- update libXcursor to 1.1.12
- update libXdmcp to 1.1.0
- update libxkbfile to 1.0.7
- update rstart to 1.0.4
- update smproxy to 1.0.5
- update viewres to 1.0.3
- update x11perf to 1.5.4
- update xauth to 1.0.6
- update xbacklight to 1.1.2
- update xbitmaps to 1.1.1
- update xclipboard to 1.1.1
- update xcmsdb to 1.0.3
- update xcursor-themes to 1.0.3
- update xcursorgen to 1.0.4
(Only the first 15 lines of the commit message are shown above )
- Please welcome Xorg 7.5.1
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646ports/148035ports/148744ports/150223ports/152889ports/154457
- Update to Xorg 7.5
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:
http://www.x.org/releases/X11R7.5/
A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.
For updating try
portupgrade -af \*
(Only the first 15 lines of the commit message are shown above )
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
- Update X.org ports to 7.3.
- Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25.
I hope that nobody will be bored enough on Christmas to remove them on
that day.
Tested by: vehemens, Rene Ladan, Beech Rintoul, sarek on x11@
