Remove libgda (component of the EOLed gnome1) not used by anything anymore.

Approved by:	gnome (implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- Fix all cases of 'No newline at end of file' in ports tree

Approved by: portmgr (bapt)

Fix the build with clang.

PR:             ports/169381
Submitted by:   pawel@

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Track dependencies after databases/gdbm update

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Mark MAKE_JOBS_UNSAFE.

PR:             137739
Submitted by:   amdmi3

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix the build with objformat removal on -CURRENT.

PR:             ports/109754, ports/109755
Submitted by:   rafan

Add conflicts with libgda2.

Approved by:    gnome (mezz)

Add a patch which lets this compile on my -current system.

Approved by:    gnome (mezz)

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

portlint:
        -Use DOCSDIR in plist.
        -Add INSTALLS_OMF, bump the PORTREVISION.

Add USE_GETTEXT to appease portlint.

Remove USE_REINPLACE from all categories starting with D

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

USE_REINPLACE must be defined before REINPLACE_CMD may be used.

Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.

Fix build with GCC 3.3.1.

PR:             55236
Submitted by:   Jens Rehsack <rehsack@liwing.de>

Remove REINPLACE commands that were rolled into gnomehack.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

chase gdbm lib version

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).

The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.

Please report any unusual problems to gnome@FreeBSD.org.

Discussed with: marcus
Reviewed by:    marcus

Get libgda compiling under -CURRENT again.

- Move misc documentation into share/doc where it belongs;
- use USE_LIBTOOL while I here;
- make gnome-hint from gnomecore actually working;
- bump PORTREVISIONs.

Add --disable-gtk-doc to prevent build and install problems when gtk-doc 0.9
is also installed.

PR:             36401
Reported by:    many
Approved by:    sobomax

Update to 0.2.96.    

Update to 0.2.95.    

Update to 0.2.94.    

Backout previous change - it seems that new revision of the patch doesn't  
apply everywhere.    

Don't filter libc_r on 5-CURRENT.    

Update checksums because distfiles were rerolled without version bump.   Since
there were some non-witespace changes bump PORTREVISIONs.    

Add patch which I missed in the previous commit.    

Update checksum - the distfile has been rerolled without version bump. Since  
there are significant differencies between old and new version bump  
PORTREVISION.    

Don't link in libc - FreeBSD doesn't need this.    

Update to 0.2.93.    

Forgot to `cvs add' this file.  

Another checksum update w/o version bump - as it was correctly predicted in   my
previous update the GNOME folks rerolled distfile once more because previous  
one was lacking some files necessary for configure script to work properly.    

Remove lib*.la files after installation, because presence of this files   breaks
gnomedb build on 4-STABLE.    

<GNOME release management just sucks>   Another day, another version-bumpless
distinfo update. This time distfile   misses some files required by configure
script, so expect another bumpless   update RSN.   </GNOME release management
just sucks>    

Update WWW.    

Update checksum. The distfile has been reroled without version bump.   Bump
PORTREVISION.    

Update to 0.2.90.    

- Fix a silly GNUism in the configure script (`==' instead of `='), that  
results in perl module not being built;   - remove useless USE_LIBTOOL.    

Update to 0.2.10    

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

The new GNOME 1.4 "Fifth-Toe" metaport, bringing together a whole   bunch of
GNOME applications under one convenient building mechanism.