*/*: Bump consumers of graphics/imlib2

New version of imlib2 in tree

*/*: Bump consumers of graphics/imlib2

New version of imlib2 in tree

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/libast: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Move MASTER_SITES from CRITICAL to LOCAL/ehaupt

- Remove Mk/bsd.efl.mk
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
  which depends on imlib2

PR:		196062
Approved by:	portmgr

Cleanup plist

- Remove old libtool patches and add INSTALL_TARGET=install-strip
- Auto-detect MMX support

- Switch to USES=libtool, drop .la files
- Use correct LICENSE

Approved by:	portmgr blanket

Update maintainer email address

Approved by:	bapt@ (co-mentor)

Fix properties on pkg-plist

- Add LICENSE
- Convert to new LIB_DEPENDS format
- Support STAGEDIR
- While I'm here:
  - Remove leading indefinite article from COMMENT
  - Strip shared library

PR:		ports/184541
Submitted by:	Rodrigo Osorio <rodrigo@bebik.net> (maintainer)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Trim Makefile headers
- Pass maintainership to submitter

PR:		175184
Submitted by:	Rodrigo (ros) OSORIO <rodrigo@bebik.net>

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

- update png to 1.5.10

Bump pcre library dependency due to 8.30 update

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

- Update imlib2 and imlib2_loaders to 1.4.4.  This version mainly contains
  bugfixes compared to 1.4.1 with some new functions added.
  I'm also dropping .la files, so port revisions of dependent library
  ports have been bumped accordingly.

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Use MASTER_SITE_CRITICAL

- Update enlightenment-devel and EFL libraries to the latest snapshot
- Deprecate old unsupported apps and modules (entice, devian, eveil, engage)
- Split evas and ecore to separate modules to handle dependencies properly
- Disable PAM in enlightenment-devel as it don't work anyway (requires root
  privilegies)
- Add DBUS support.

Thanks to:      az

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update e17 ports to 20070223 snapshot
- Bump portrevisions on all imlib2-dependend ports as the library soversion
  was bumped [1]
- Disable fade-in effects in x11-fm/evidence permanently, since evas doesn't
  support it anymore. [2]

The patch was tested in the tinderbox.

Approved by:    portmgr (marcus) [1],
                Anders Troback <freebsd@troback.com> (maintainer) [2]

Use libtool15 port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Add additional, faster master site.

- Update to 0.7 and fix fetch [1]

PR:             94203
Submitted by:   Ion-Mihai "IOnut" Tetcu <itetcu@people.tecnik93.com>
Reported by:    fenner's distfile survey [1]
Approved by:    portmgr (marcus)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION on all ports that received the imlib2 shlib chase.

1: Upgrade imlib2 to 1.2.0
2: chase shared library version to 3.

PR:             ports/78347
Submitted by:   Russell Jackson <raj at cserv62.csub.edu>
Somepart by:    me

- Update to 0.6.1

PR:             ports/77773
Submitted by:   Sam Lawrance <boris@brooknet.com.au>

remove USE_FREETYPE, in the fact, libast don't need freetype library.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

SIZEify.

- Chase libraries for new Imlib2 version

De-pkg-comment.

Update to version 0.5.

PR:             43785
Submitted by:   Ports Fury

Reset maintainership to ports@.  Thanks for your work on these, Jeremy!

PR:             38874
Submitted by:   Jeremy Norris <ishmael@mchsi.com> (previous maintainer)

Update maintainer's email    

Upgrade to 0.4.    

Add devel/libast, "A library of assorted spiffy things, previously known as  
libmej, the Eterm helper library".