Web2c, a system which converts TeX, Metafont, and other related WEB programs
to C. By itself, it is not a complete, ready-to-run, TeX distribution, nor
is it a general-purpose Pascal-to-C or WEB-to-C translator.
*/tex*: Fix poudriere qa
During my last commit on tex* somehow I built the ports without -t
causing poudriere to skip some qa check. These are fixed in this
commit.
Reported by: jhale
Sponsored by: Nepustil
Mk/bsd.sites.mk: Add new MACRO TEX
There are two different sites/mirror required for the ports tree. Due to
the packaging of texlive we need the CTAN historic mirror which is
defined in TEX_CTAN and normal mirror which hosts most of the packages.
Unfortunately both were uses interchangeably without checking the
details and in previous there was single sites mirroring both the
historic dists and the noemal packages. As this is no longer the case
update all other ports pointing towards the wrong site.
Approved by: portmgr (blanket)
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
tex* : Update version 20150521=>20210325
- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
print/texlive-full: Update maintainership of TeX Live universe ports
- Give the maintainership of the TeX-live related ports to the FreeBSD
TeX group [1].
[1] https://wiki.freebsd.org/tex
Approved by: hrs
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
- Separate libsynctex from tex-web2c to devel/tex-synctex.
- Separate basic TeX engines from tex-web2c to print/tex-basic-engines.
- Add CTAN mirrors to MASTER_SITES.
- Drop gmake where not required.
- Remove extra dependencies in print/tex-aleph, print/tex-dvipdfmx,
print/tex-luatex, print/tex-xetex, and japanese/tex-ptex.
Update TeXLive to TL2015.
- print/texlive-infra was renamed with print/texlive-tlmgr.
Note that currently tlmgr(1) does not work because of
lack of TLPDB. This will be fixed.
- Lua libraries used in LuaTeX are separated into
devel/tex-libtexlua and devel/texlibtexluajit.
USE_TEX supports them via keywords "texlua" and "texluajit".
- libsynctex is currently installed by devel/tex-web2c.
This will be separated into a single port.
- Add graphics/libpotrace and use installed libpotrace
and libharfbuzz.
Update TeXLive to 2014.
- Note that full support of configuration tools such as tlmgr and texconfig
is not ready yet.
- Most of dviware now supports libpaper to choose the default papersize.
Use paperconfig(8) utility or print/papersize-default-* packages.
- Some quite old macros of the age of latex209 have been removed, and
there are user-visible/invisible incompatibilities. Please send a report
to freebsd-tex@FreeBSD.org or file a PR if you have trouble.
Update openjpeg to 2.1.0.
Version 2.x is incompatible with openjpeg 1.5. Preserve it as openjpeg15
and update users.
Approved by: portmgr (implicit) for NO_STAGE ports
- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper
support. dvipdfmx's default paper size can be set by
${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as
other programs like print/psutils do.
- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
manually-installed and/or old TeXLive files can prevent them from
working. [1]
- Fix pkg-plist in print/texlive-texmf.
- Remove DIST_SUBDIR from Mk/bsd.tex.mk.
Reported by: bsam, Stephen Montgomery-Smith [1]
TeXLive mega commit. The following ports have been added:
* Meta port
- print/texlive-full: meta port to install all of the TeXLive components
* Libraries
- devel/tex-kpathsea: kpathsea library
- devel/tex-web2c: WEB2C toolchain and TeX engines
- print/tex-ptexenc: character code conversion library for pTeX
* Base part of the TeXLive
- print/texlive-base: binary programs in TeXLive
- print/texlive-texmf: macro and font data in TeXLive
- print/texlive-infra: tlmgr dependency (Perl modules)
(Only the first 15 lines of the commit message are shown above )
