*/tex*: Fix poudriere qa
During my last commit on tex* somehow I built the ports without -t
causing poudriere to skip some qa check. These are fixed in this
commit.
Reported by: jhale
Sponsored by: Nepustil
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
tex* : Update version 20150521=>20210325
- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version
(Only the first 15 lines of the commit message are shown above )
print/tex-xetex: Avoid mixing libc++ and libstdc++
This port was not respecting the CC and CXX variables, thus it could
pick up gcc and g++ instead, and that would cause mixups between
libstdc++ (which is preferred by gcc) and libc++ (which is in base),
ultimately leading to link errors.
Appproved by: maintainer timeout
PR: 234221
MFH: 2021Q2
print/texlive-full: Update maintainership of TeX Live universe ports
- Give the maintainership of the TeX-live related ports to the FreeBSD
TeX group [1].
[1] https://wiki.freebsd.org/tex
Approved by: hrs
graphics/poppler: update to 21.01.0
Release 21.01.0:
core:
* Faster routines for jpeg decoding
* Fix reading signatures in encrypted files
* Add white point correction when lcms is used
* JBIG2Stream: Fix byte counting
* Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
* Specifically use DeviceGray instead of DefaultGray for softmasks
* Fix various issues handling broken files
utils:
* pdftocairo: Setmode binary for windows
* pdfsig: Add hability to digitally sign files
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 20.12.0
Changelog:
core:
* Draw better circles for circle annotations
* Fix annotation line width if no appearance stream or style are given
* Tweak rendering of highlight annotations
* Fix border rendering of some annotations
* Fix rendering of some files. Issue #976 Issue #567
* PSOutputDev: provide options to set the rasterization color space and
ICC profile
* PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
* PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
* Use the font name without subset tag when querying for a system font
* Splash: Fix wrong x adjustment during clipping
* Splash: Fix blitImage in uncolored tiling patterns
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 20.10.0
Release 20.10.0:
core:
* Filter out repeated forms
* Implement EmbedStream::reset()
* CairoOutputDev: evict just font faces owned solely by cache.
* Splash: Rename Yd to Ydown, Xu to Xup, etc.
* Splash: fix crash in out-of-memory situation.
* Fix some undefined behaviour situation with forged files
PR: 250052
Exp-run by: antoine
graphics/poppler: update to 0.90
Release 0.90.0:
core:
* Color profile tweaks
* Small signature improvements
* BBoxOutputDev: Fix calculation when type3 fonts are involved
* Fix potential crash when reading Forms
* Fix infinite loop in broken file
glib:
* Fix adding annots in rotated pages
* Add ability to reset forms
* Several fixes to the documentation
qt5:
* Make it clear we require Qt 5.5
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.89.0
Release 0.89.0:
core:
* Add support for ResetForm action. Issue #225
* Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
* Fix exporting to PS of some files with CID fonts
* Use ICC profiles in PS output (if new enough lcms is used)
* Allow almost-singular tiling pattern matrices. Issue #894
* Fix memory leak when failing to load some fonts
* CairoOutputDev: Use stroke opacity when clipping to a stroke path
* CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190
glib:
* Add poppler_movie_get_aspect
cpp:
* Add the font infos to the text_box object
Exp-run by: antoine
PR: 246848
graphics/poppler: update to 0.88.0
Release 0.88.0:
core:
* Support Widget Annotation Buttons not linked to any Form
* SplashOuputDev: Use stroking opacity when clipping to a stroke path
* Handle 1 bit RGB images in ICC colorspace
* Internal code improvements
qt5:
* Add Document::signatures. Returns signatures not attached to any page
* ArthurOutputDev: Fix font hinting
* ArthurOutputDev: Set the opacity when filling with axial gradients
* ArthurOutputDev: Implement the clipToStrokePath method
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.87.0
Release 0.87.0:
core:
* Fix crashes due to inconsistent vtables for Clang builds
* Fix leak in broken files
* Internal code improvements
qt5:
* Add option to get form choice for export value
* ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695
glib:
* Internal code improvements
utils:
* pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest
PR: 245150
Exp-run by: antoine
graphics/poppler: update to 0.84.0
Release 0.84.0:
core:
* Fix crash when converting from Unicode to ASCII-7
* Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
* JBIG2Stream: fix potential crash in malformed documents
* JBIG2Stream: fix leak in reset() if called several times
* Internal code improvements
utils:
* pdfimages: Add error message if first page is larger then number of
pages.
* pdfinfo: Improved paper size recognition
* pdfsig: Fix exit code when dumping signatures
* pdftocairo: Error out when even/odd selects 0 pages
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories p
Add USES=xorg and USES=gl to ports in categories starting with 'p'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
graphics/poppler: update to 0.82.0
Release 0.82.0:
core:
* Fix not being able to open some files. Issue #832
* Fix crashes in malformed files
* Fix memory leak on broken files
* Minor performance improvements
* Minor code improvements
glib:
* Add poppler_document_new_from_bytes
* PopplerAttachment: Silence deprecation warnings for ctime/mtime
build system:
* pdf-inspector: Support builddir != srcdir
* Install Cairo* headers if Cairo has been found
Thanks to adridg@ for fixing all the fallout.
Exp-run by: antoine
PR: 241532
Approved by: gnome (kwm, implicit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
graphics/poppler: update to 0.76.1
From Changelog at https://poppler.freedesktop.org/releases.html :
Release 0.76.1:
core:
* Make the mul tables be calculated at compile time with constexpr.
* splash: Fix compile with SPLASH_CMYK enabled
* Some typo fixing in error messages
qt5:
* Fix regression in annotation handling
build system:
* Fix some typos in build system output and comments
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
print/tex-xetex, print/tex-luatex: prepare for poppler upgrade
There are many api changes inside poppler, and our TeX distribution is ancient.
For now, switch these to use their bundled version of poppler.
PR: 233452
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
devel/icu: drop C++98 compatibility workarounds
Now that both USE_GCC and -CURRENT default to C++14 there's little
reason to complicate maintenance. Revert r449685 to usher consumers
into post-C++11 world.
PR: 222433222434222435
print/tex-xetex: Add dvipdfmx to dependencies
compilation of tex files using xetex will fail with
(./test.aux)sh: /usr/local/bin/xdvipdfmx: not found
otherwise.
PR: 217094
Approved by: hrs (maintainer timeout)
- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
--disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU. The code wanted to use BYTE_ORDER
defined in machine/endian.h, but this isn't visible because ICU is
compiled with _XOPEN_SOURCE. Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
a C++11 runtime library now. Add this to all ports that depend on it
so their executables load the right libstdc++.so on FreeBSD 9.
PR: 205120
Exp-run by: antoine
Approved by: portmgr (antoine)
Bump PORTREVISION for the icu revert.
This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.
PR: 205120
With hat: portmgr
Sponsored by: Absolight
Update poppler to 0.40.0. [1]
Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.
PR: 206293 [1]
Submitted by: olivierd@ [1]
Obtained from: ubuntu [2], rubygem-poppler upstream [3]
- Separate libsynctex from tex-web2c to devel/tex-synctex.
- Separate basic TeX engines from tex-web2c to print/tex-basic-engines.
- Add CTAN mirrors to MASTER_SITES.
- Drop gmake where not required.
- Remove extra dependencies in print/tex-aleph, print/tex-dvipdfmx,
print/tex-luatex, print/tex-xetex, and japanese/tex-ptex.
Update TeXLive to TL2015.
- print/texlive-infra was renamed with print/texlive-tlmgr.
Note that currently tlmgr(1) does not work because of
lack of TLPDB. This will be fixed.
- Lua libraries used in LuaTeX are separated into
devel/tex-libtexlua and devel/texlibtexluajit.
USE_TEX supports them via keywords "texlua" and "texluajit".
- libsynctex is currently installed by devel/tex-web2c.
This will be separated into a single port.
- Add graphics/libpotrace and use installed libpotrace
and libharfbuzz.
Update poppler to 0.30.0 [1].
Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].
PR: 196599 [1]
Submitted by: olivierd@ [1]
Exp-run by: antoine@
Obtained from: upstream [2]
Update TeXLive to 2014.
- Note that full support of configuration tools such as tlmgr and texconfig
is not ready yet.
- Most of dviware now supports libpaper to choose the default papersize.
Use paperconfig(8) utility or print/papersize-default-* packages.
- Some quite old macros of the age of latex209 have been removed, and
there are user-visible/invisible incompatibilities. Please send a report
to freebsd-tex@FreeBSD.org or file a PR if you have trouble.
Support stage for texlive, given it is impossible to rebuild the fmt files into
the stage then they are now rebuild in post-installation, like it is done in
other package system
Update openjpeg to 2.1.0.
Version 2.x is incompatible with openjpeg 1.5. Preserve it as openjpeg15
and update users.
Approved by: portmgr (implicit) for NO_STAGE ports
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
Update poppler to 0.24.4.
Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.
Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper
support. dvipdfmx's default paper size can be set by
${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as
other programs like print/psutils do.
- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
manually-installed and/or old TeXLive files can prevent them from
working. [1]
- Fix pkg-plist in print/texlive-texmf.
- Remove DIST_SUBDIR from Mk/bsd.tex.mk.
Reported by: bsam, Stephen Montgomery-Smith [1]
TeXLive mega commit. The following ports have been added:
* Meta port
- print/texlive-full: meta port to install all of the TeXLive components
* Libraries
- devel/tex-kpathsea: kpathsea library
- devel/tex-web2c: WEB2C toolchain and TeX engines
- print/tex-ptexenc: character code conversion library for pTeX
* Base part of the TeXLive
- print/texlive-base: binary programs in TeXLive
- print/texlive-texmf: macro and font data in TeXLive
- print/texlive-infra: tlmgr dependency (Perl modules)
(Only the first 15 lines of the commit message are shown above )
