Removed unmaintained upstream xemacs ports and dependencies

Allow to build with texinfo from ports

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

Convert from USE_MOTIF to USES=motif

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Get rid of XAWVER option in bsd.port.mk it does not need to be specified there
also remove a useless global XAWVER PLIST_SUB

Add USE_CSTD=gnu89 to fix linking when building with clang

- update png to 1.5.10

- Update to 21.4.22

Bump PORTREVISION after open-mofit update

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Reset anray@FreeBSD.org due to maintainer-timeouts and no response to email.

Hat:            portmgr

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- update to jpeg7
Tested by:      pav on pointyhat

Update dependency.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Correct plist for xemacs and xemacs21-mule.

Reported by:    pointyhat via pav

- Update xemacs and xemacs21-mule to 21.4.21

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Fix plist for canna

PR:             ports/110857
Submitted by:   NOKUBI Hirotaka <nokubi@ff.iij4u.or.jp> (canna maintainer)

- Reflect the reality: chinese/xcin is retired.

Fix build xemacs-mule with canna support.

Reported by:    pointyhat via kris

Fix plist.

Reported by:    pointihat via kris

Update xemacs and xemacs21-mule to 21.4.20 "Double Solitaire".

- chinese/xcin is moved to LOCALBASE

- Chase chinese/xcin25 -> chinese/xcin

- Bump PORTREVISION for latest pkg-plist changes

Approved by:    anray (maintainer)

When editors/xemacs21-mule is installed as ports, site-lisp and
site-modules directories are created.  But when it's installed as
package, these directories are not created. Fix it.

PR:             ports/103373
Submitted by:   NIIMI Satoshi

Add site-lisp to default load paths.

Reported by:    jylefort

- Fix plist with canna

PR:             ports/94738
Submitted by:   NOKUBI Hirotaka <nokubi@ff.iij4u.or.jp> (canna maintainer)

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Fix WITH_XCIN25 depends.

PR:             ports/93565
Submitted by:   Rong-En Fan <rafan@infor.org>

Fix plist.

Reported by:    yoichi, kris

Removed configure arg `--with-ldap-no'. Now when ldap installed, xemacs
compiled with ldap support.

Reported by:    vs

Fix plist.

Reported by:    pointyhat(kris)

Fix build zh-xemacs-mule port.

Reported by:    pointyhat(kris)

Update xemacs and xemacs21-mule to 21.4.19

eplace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

editors/emacs20 was changed not to conflict with other emacsen.

PR:             ports/90480
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>
Approved by:    sem(mentor)

Change email address for all my ports.

Approved by:    sem(mentor)

- Update to 21.4.18

PR:             ports/90010
Submitted by:   maintainer

[MAINTAINER] editors/xemacs21-mule: fix work under amd64.

        * Fix XEmacs working under amd64

PR:             89558
Submitted by:   Andrey Slusar <anrays@gmail.com>

XEmacs binary built with --pdump does not run without .dmp file.
The fix will be removing --pdump or add .dmp in plist, and now
take the first solution suggested by the maintainer.
The change only affects amd64 build.

Submitted by:   maintainer

- Revive japanese/xemacs21-canna

PR:             ports/88528
Submitted by:   NOKUBI Hirotaka <nokubi@ff.iij4u.or.jp>

- Fix depends when WITH_XAW3D defined.

PR:             ports/89251, ports/89254
Submitted by:   Andrey Slusar (maintainer)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Add CONFLICTS variable, since this port conflicts with other
emacs/xemacs ports.

Approved by:    maintainer

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Remove BROKEN tag on amd64, port was already fixed.

Submitted by:   maintainer

BROKEN on amd64: Incomplete pkg-plist

Approved by:    portmgr (self)

- Fix plist

PR:             ports/79018
Submitted by:   Andrey Slusar <anrays@gmail.com> (maintainer)

- Remove extra dirs on deinstall

PR:             ports/78483
Submitted by:   maintainer

Update to 21.4.17 "Jumbo Shrimp"

PR:             ports/77236
Submitted by:   maintainer

- Fixed regex related XEmacs-mule hangs.

PR:             ports/76808
Submitted by:   maintainer

* Remove editors/xemacs-packages from RUN_DEPENDS.
* Cleanup some portlint warnings.
* Rename option WANT_GTK to WITH_GTK
* Add build with Xaw3d - option WITH_XAW3D
* Fix regex uninterrupable loops.

PR:             ports/75920
Submitted by:   maintainer

[PATCH] change MAINTAINER email address for all my ports.

PR:             ports/75559
Submitted by:   Andrey Slusar <anray@inet.ua>

- maintainer of editors/xemacs21-mule can't maintain
  japanise ports. So, set maintainer to ports@ there.

Submitted by:   Andrey Slusar <anray(at)inet.ua> (maintainer of xemacs21-mule)

- fix build with GTK

PR:             ports/75593
Submitted by:   maintainer

- Fix build on the 6-CURRENT

PR:             ports/75494
Submitted by:   maintainer

- Update to 2.4.16
- Pass maintainership to submitter

PR:             ports/75444
Submitted by:   Andrey Slusar <anray(at)inet.ua>

Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with: hrs
Approved by:    kiri(blanket), mita(blanket),
                shige(blanket), taoka(blanket)

- USE_GNOME must be defined above bsd.port.pre.mk, otherwise make dies
  with malformed conditional error. This fix INDEX build for people who
  define WANT_GTK.

Fixes PR:       ports/74147

SIZEify (maintainer timeout)

Port to amd64.

Submitted by:   James Van Artsdalen <james-freebsd-amd64 at jrv.org>, gallatin,
kan

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

Forgotten removing files/patch-al.

Noticed by:     knu@FreeBSD.org

Update 21.4.13_1 to 21.4.14.

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

* Change distinfo for new distfiles (forgotten in previous commit ;)

* Add patch(patch-al) to avoide *very* slow fonfifying [1]

Refered from:   http://list-archive.xemacs.org/xemacs-beta/200305/msg00467.html
[1]

Update to 21.4.13.

Update documents with changing 21.4.* stable version.

Modify files for move xemacs21-mule to version 21.4.12.

Remove needless files for move xemacs21-mule to version 21.4.12.

Add additinal files for move xemacs21-mule to version 21.4.12.

More manual pkg-comment cleanups.

Approved by:    portmgr (implicitly)

Destroy pkg-comment for some of the stranger uses in the tree,
pending the final semi-automatic purge.

Approved by:    portmgr (implicitly)

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

Japanese resource directory name changed because of locale change.

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;   the ECHO
macro is set to "echo" by default, but it is set to "true" if   make(1) is
invoked with the -s option while ECHO_CMD is always set to   the echo command.  
 

Change (RUN-BUILD)_DEPENDS from editors/xemacs-basic-mule-packages   to
editors/xemacs-mule-packages according to xemacs-*packages   rearrangement.    

Update according to version up 21.1.13->21.1.14.    

Version up to 21.1.13. Corresponding with this change,bsd.emacs.mk's   xemacs21
version will be changed by shige :)    

Enable XIM support by default.   Reflect Wnn4 -> FreeWnn change.   Fix build
problems.    

Change PATCHDIR from patches/ to files/.  Also change PKGDIR (pkg/ to   .) and
other pkg variables if they are nearby.    

Convert category editors to new layout.