textproc/xerces-c3: Update to 3.3.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=10510&version=12355023

graphics/cegui: add patch to fix upcomming libxml2 update

PR:	279965

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

lang/tolua++: remove dependency on python2, undeprecate consumer ports

Remove # $FreeBSD$ from Makefiles.

Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665

- Update math/glm to 0.9.9.8

Remove occurrences of %%LUA_LIBDIR%%.

Differential Revision:	https://reviews.freebsd.org/D29138

graphics/cegui: remove optional (and broken) support for expired Python 2.7

PR:		249691
Submitted by:	swills

devel/boost-*: update to 1.72.0

Changes:	http://www.boost.org/users/history/version_1_72_0.html
PR:		241449
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D22136

graphics: Add missing USES={gl,gnome,sdl}

Add USES=xorg USES=gl, ports categories e and g

Add USES=xorg and USES=gl to ports in categories starting with 'e' and 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

devel/boost-*: update to 1.71.0

Changes:	http://www.boost.org/users/history/version_1_71_0.html
PR:		238827
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D20774

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

- Copy graphics/ogre3d to graphics/ogre3d19 and add mutual conflicts
- Switch all ogre3d consumers to ogre3d19

This allows to update ogre3d to the latest version without breaking
existing ports. The plans are also to make it possible for both ogre3d
versions to coexist.

Approved by:	oliver (discussed via private email)

devel/boost-*: update to 1.70.0

Changes:	http://www.boost.org/users/history/version_1_70_0.html
PR:		235956
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D19303

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

devel/boost-*: update to 1.69.0

Changes:	http://www.boost.org/users/history/version_1_69_0.html
PR:		232525
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17645

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

devel/boost-*: update to 1.68.0

- Switch to C++14 for libboost_system to support C++14 consumers

Changes:	http://www.boost.org/users/history/version_1_68_0.html
PR:		229569
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D16165

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

devel/boost-*: update to 1.67.0

Changes:	http://www.boost.org/users/history/version_1_67_0.html
PR:		227427
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D15030

devel/boost-python-libs got forgotten in the python flavorization, fix
this oversight.

Reviewed by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D14368

devel/boost-*: update to 1.66.0

Changes:	http://www.boost.org/users/history/version_1_66_0.html
PR:		223922
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D13279

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Bump portrevision to chase graphics/glew shard library version update.

PR:		223370
Submitted by:	zeising
exp-run by:	antoine
Approved by:	antoine

devel/boost-*: update to 1.65.1

Changes:	http://www.boost.org/users/history/version_1_65_1.html
PR:		218835
Approved by:	maintainer timeout (1.65.1: 2 weeks; 1.65.0: 1 month)
Tested by:	jhibbits (on powerpc64, earlier version)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

devel/boost-*: enable C++11 features

PR:		218835
Obtained from:	https://github.com/DragonFlyBSD/DeltaPorts/pull/690
Approved by:	maintainer timeout (2 months)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

update to cegui 0.8.7

PR:		221907
Submitted by:	Piotr Kubaj

Remove USES=execinfo.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

devel/boost-*: update to 1.64.0

Changes:	http://www.boost.org/users/history/version_1_64_0.html
PR:		218835
Approved by:	office (bapt)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D10472

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

- In x11-toolkits/irrlicht build only the shared library.  The upstream
  Makefile does not support building both the static and shared library.
  It compiles the code without -fPIC first for the static library and then
  creates the shared library from the same object files without recompiling
  them with -fPIC.
- The upstream install target can now be used as well.
- Use upstream library version and bump dependent ports.

devel/boost-*: update to 1.63.0

Changes:	http://www.boost.org/users/history/version_1_63_0.html
PR:		215598
Exp-run by:	antoine
Approved by:	office (bapt)
MFH:		2017Q1

devel/boost-*: update to 1.62.0

- Enable `long double` C99 math usage
- Switch 9.x back to building with GCC

Changes:	http://www.boost.org/users/history/
PR:		199601
Submitted by:	Chen Xu, bapt, amdmi3, truckman (based on)
Reviewed by:	rakuco (kde) (earlier version)
Exp-run by:	antoine (3 tries), truckman (consumers only, earlier versions)
Approved by:	bapt (office)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Add USES=pathfix support for CMake.  Some ports that use CMake to build
already had USES=pathfix, although it did nothing.  For those ports, I
either removed it as they were handling the pkgconfig files differently
or I removed patches and substitutions that accomplished the same thing
as pathfix.

Differential Revision:	https://reviews.freebsd.org/D850
Reviewed by:	antoine, bapt, tijl
Approved by:	portmgr (bapt)

Switch to USES=execinfo

PR:		205299
Submitted by:	me
Approved by:	maintainer

math/glm: update to 0.9.7.1,1

Changes:	https://github.com/g-truc/glm/releases/tag/0.9.7.1
PR:		203181
Approved by:	maintainer timeout (83 days)

Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.

Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.

This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).

Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
                       no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
                 retrieved from the CMAKE_CXX_COMPILER variable in the build
                 system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
                        has no effect on the build system.

Reviewed by:		makc
Differential Revision:	https://reviews.freebsd.org/D3403

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Update to 0.8.4.

Approved by:	oliver

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been

- Convert <OPTION>_USE= PYTHON... to <OPTION>_USES= python...

With hat:	python@

graphics/cegui: remove comment about removed games/secretmaryochronicles

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Update CMake to 3.0.1.

The 3.0 series is an incremental improvement over the previous 2.8 series
despite the major version number change. A list of important changes is
available at http://www.cmake.org/cmake/help/v3.0/release/3.0.0.html

On the porting side
* The minimum FreeBSD release we have to support in the ports tree is now
  recent enough that ports/168671 can finally be committed: instead of
  building and using CMake's own copies of bzip2, curl, expat, libarchive,
  liblzma and zlib, we use the versions in ports and/or the base system.

* CMake's documentation system has been changed and vastly improved at the
  cost of now depending on Sphinx. We still generate only man pages, but can
  start generating the HTML documentation in the future if desired.

converters/fribidi:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories G-I.

CR:		D201
Approved by:	portmgr (bapt)

Attempt to fix LIB_DEPENDS

Fix lua option

- OPTIONize. This adds support for more features, fixes multiple hidden
dependencies and fixes build in presence of boost-python-libs (won't compile if
cegui picks it up). Default options set to match what cegui currently builds
with + TINYXML option
- Enable TINYXML by default, needed for games/secretmaryochronicles
- Use canonical names for patches
- Fix freetype detection
- Fix linking with libexecinfo (link it with the library, not just add it to
pkgconfig file)
- Add LICENSE

Approved by:	oliver (maintainer)

- Use new LIB_DEPENDS syntax

Approved by:	portmgr blanket

- After recent graphics/devil soversion bump its PORTREVISION was not bumped, so
bump it properly now and also bump all dependent ports again

Submitted by:	tijl

- Switch graphics/devil to USES=libtool

Since this changes shared lib version number, bump PORTREVISION on all dependent
ports:

- devel/love
- devel/love07
- devel/love5
- games/arx-libertatis
- games/pink-pony
- games/spring
- graphics/cegui
- graphics/graphviz

While here, fix graphics/cegui plist to not remove mtree directory.

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

make STAGEful

delete files I added by misstake

update ogre to 1.9.0
update cegui to 0.8.3

Remove trailing whitespaces from category graphics

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

update cegui to 0.7.9

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

update cegui to 0.7.7

update cegui to 0.7.6
ignore tinyxml when installed and always use local copy [1]

PR:             ports/164547 [1]
Submitted by:   Yanhui Shen <shen.elf@gmail.com> [1]

- update png to 1.5.10

- Enable null renderer in cegui
- Fix cegui library versioning scheme

PR:             167831
Submitted by:   myself
Approved by:    maintainer timeout (oliver, 2 weeks)

Bump pcre library dependency due to 8.30 update

update ogre to 1.7.4
bump PORTREVISION on affected ports

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

update graphics/ogre3d to 1.7.3
bump PORTREVISION of affected ports

graphics/cegui:         update to 0.7.5
graphics/ogre3d:        update to 1.7.2
games/ember:            update to 0.6.0
games/freeorion:        update to 0.3.13.3795
games/vegastrike:       Bump PORTREVISION
x11-toolkits/gigi:      Bump PORTREVISION

PR:             153817, 153818

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with G

update to 0.6.2b

- Chase devil shlib bump

update cegui to 0.6.2
bump PORTREVISION for the affected ports

force the use of lua 5.1
bump portrevision

update cegui to 0.6.1
bump PORTREVISION for the affected ports

fix if lua 5.1 is installed

PR:             ports/125107
Submitted by:   Dmitry Marakasov <amdmi3@amdmi3.ru>

update to 0.6.0

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

fix DevIL support and other things
bump PORTREVISION

PR:             120178
Submitted by:   Dmitry Marakasov <amdmi3@amdmi3.ru>

fix the removing of the "Samples" SUBDIR from the ports Makefile by using
a propper regexp.

PR:             ports/116499
Submitted by:   amdmi3@amdmi3.ru

update to 0.5.0
do not force the usage of gcc 3.4, the ports are now gcc 4 ready

bump PORTREVISION because of recent USE_GCC=3.4 change