Little CMS intends to be a small-footprint color management library, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC), and offers fast transformation routines between
ICC profiles.
Color management refers to techniques that ensure consistent colors while
images are transferred from scanners or cameras to monitors and printers.
===> The following configuration options are available for lcms-1.19_9,1:
DOCS=on: Build and/or install documentation
JPEGICC=on: Build color profile applier for JPEG
TIFFICC=on: Build color profile applier for TIFF
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Let USES=localbase add -L${LOCALBASE}/lib to LIBS instead of LDFLAGS.
USES=localbase:ldflags can be used to set LDFLAGS. Normally LDFLAGS
appears too early on the command line causing some ports to link with
their own libraries in LOCALBASE (if installed) instead of WRKSRC.
Also make use of _USES_POST so -L${LOCALBASE}/lib is added as late as
possible after anything a port Makefile might set. Use _USES_POST
instead of .include in libedit.mk and libarchive.mk so things like
'USES=libedit localbase:ldflags' work correctly.
Fix some issues with LIBS in some ports.
Switch ports that don't support LIBS to localbase:ldflags.
PR: 212987
Exp-run by: antoine
Approved by: portmgr (antoine)
Revert r356926 and r356927. Not all ports that depend on lcms* have been
converted to USES=libtool yet, so their .la files may still refer to the
lcms* .la files.
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
- Enable JPEGICC and TIFFICC by default
- Use USES=libtool instead of USE_GNOME=lthack
- Use USES=pathfix instead of USE_GNOME=gnomehack
- Use PORTDOCS
- Install static library
- Strip shared library
- Use MAKE_CMD
- Simplify Makefile
- Bump PORTREVISION for dependency and package change
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Remove unnecessary patch: already replaced by REINPLACE_CMD
- Support STAGEDIR
- Return my ports back to the pool. I was unable to make any fixes to
my ports in the past 3 weeks while ports were broken on any 10.x
machines, which means I'm unable to maintain them. So let people know
that there's no available support for them until things are back to
normal (which also means that anyone with spare time will be able
to fix them without getting approval).
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
- Update to 1.15
- Pass maintainership to submitter
Short changelog:
- Black preservation on CMYK-> CMYK transforms
- Ability to set adaptation state of observer on absolute colorimetric
transforms.
- A rather advanced feature. Actually it only allows No adaptation (d=0) and
observer fully adapted (d=1)
- lcms can now "fix" some broken 8-bit profiles that have gray axes misplaced.
- icctrans can now read CGATS/IT8 files.
- improved tifficc with tiff Lab8 support
PR: ports/101603
Submitted by: Stanislav Sedov <ssedov(at)mbsd.msk.ru>
Approved by: krion (mentor)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Remove the bogus dependency on -ltiff (--without-tiff was always in there).
Make the testcms link the new -lcms statically to avoid possible conflicts
with the already installed library (probably of a different version).
PR: ports/68610
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Fix 64-bit platforms: the ALIGNLONG macro aligned on an 32-bit word
boundary, which on 64-bit platforms is not the proper alignment for
longs. The patch replaces the hardcoding of 3 with sizeof(long)-1.
Tested on: ia64
Shared library make use of -lm symbols therefore must be linked against it.
Otherwise we get unresolved references error at the time linking this library
into objects w/o -lm dependency.
This was the reason why color proof module in gimp-devel was not built.
Transfer maintainership to kris. This port proved too difficult to
maintain without access to machines of various architectures. Kris
has such access, but would not share it and gets tired too quickly.
With my portmgr hat on, revert this port to 1.09 and bump PORTEPOCH.
The port fails to pass the internal self-tests on 64-bit platforms
running very recent 5.1 systems, but it is required to build KDE and
therefore critical for the release.
Use BYTE_ORDER, BIG_ and LITTLE_ENDIAN instead of their
underscore-prefixed aliases, which are not available on -stable. There I
was proud of myself for testing on i386, alpha, and panther, and still
missing a -stable incompatibility :-\
Submitted by: Voodai, Lars Erik Gullerud, Ivajlo Nikolov (so far)
Upgrade to 1.09. Prepend SourceForge's list of mirrors to MASTER_SITES.
Install JPEG-related sample files in addition to the TIFF sample. All
this samples can be built by the port, BTW, but would require
lib-dependency on libtiff and libjpeg.
Teach it to try int32_t and friends on all Unixes, not just SGI's Irix. A
whole bunch of little 32-bit related hunks was needed, but now it passes
its own bundled tests (which also needed a little patch for an unitialized
variable) on Alpha. Bump PORTREVISION.
Upgrade to 1.07. Use the official PORTDOCS instead of the pre-PORTDOCS
homegrown DOCS variable. Do not install the test-executable, but run it after
build. Change the mastersite and WWW.
Add new port of LCMS 1.06, the Little Color Management System, a graphics
library. Color management is the process of keeping "profiles" which describe
the response of scanners, cameras, monitors, printers and such to light, and
compensating for the different response curves as images are transferred from
one device to another.
